Lycra & Stretch Fabric - Wholesale

White & Black Fine Wavy Chevron Printed Spandex Fabric - Dense all-over layout of thin hand-drawn black lines stacked into soft-peaked wavy chevrons, with occasional rows of tiny dots following the peaks, on a white ground, printed to order on Poly Spandex and sold by the metre. Available from 1 metre with flexible wholesale minimums, made at our Surat mill and dispatched in 4-7 days. About this print Design 4029 is dense all-over layout of thin hand-drawn black lines stacked into soft-peaked wavy chevrons, with occasional rows of tiny dots following the peaks, on a white ground. The scale is large (main motif approx. 1/6 of image width). This is an all-over, non-directional print, so pattern pieces can be nested either way up to make the most of the cloth. Measured shades in the artwork run approximately #D8D8D8, #505050, so trims, linings and thread can be matched directly against those values. Part of the Clothwala 2026 digital-print range. Fabric needed per garment Quantities below are for a standard non-directional layout at 44 inch width. These allow for one-way (directional) cutting - every piece laid the same way, which is how a print like this must be cut. The full chart further down gives the plain figure without that allowance. All quantities are estimates for a standard size; confirm against your own pattern before ordering. Garment Fabric needed Recommended quality Maxi Dress 3.5 - 4.0 m Poly Georgette (70-90 GSM) Dress 3.5 - 4.0 m Poly Crepe (80-95 GSM) Co-ord Set 3.5 - 4.0 m Poly Crepe (80-95 GSM) Kurti 2.75 m Poly Crepe (80-95 GSM) Saree Blouse 1.25 m Poly Japanese Satin (90-110 GSM) Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Men's Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Skirt 2.25 - 2.75 m Viscose Crepe (110-140 GSM) Kids Frock 1.75 m Cotton Cambric (80-110 GSM) Scarf 1.0 - 2.0 m Poly Chiffon (60-80 GSM) Specifications Design code 4029 Print Fine Wavy Chevron - Dense all-over layout of thin hand-drawn black lines stacked into soft-peaked wavy chevrons, with occasional rows of tiny dots following the peaks, on a white ground Ground colour White Accent colour Black Approx. shades #D8D8D8, #505050 Print scale Large (main motif approx. 1/6 of image width) Repeat All-over / non-directional Suitable garments Shirt, Dress, Blouse, Co-ord Set, Skirt, Tunic, Scarf Fabric Poly Spandex Composition Polyester Stretch Stretchable - 7% Lycra (spandex) GSM 200 gsm (this fabric) Width 54 inch Minimum order From 1 metre; flexible wholesale minimums Production Made to order - customisable Dispatch 4-7 days from our Surat mill Other bases The same artwork prints on any of our 17 bases - ask for a quote Printing High-definition digital print, wash-fast Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Full fabric requirement chart This design is printed on Poly Spandex here, and the same artwork prints to order on any of our 17 base cloths. Quantities are at 44 inch width. Plain figures for a standard size, without a directional-cut allowance - add roughly 0.5 m per garment if every piece must be laid the same way. Estimates: confirm against your own pattern before ordering. Fabric needed for 37 garment types - womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 - 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 - 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 - 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 - 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 - 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 - 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 - 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 - 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 - 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 - 3.5 m Poly Crepe one-piece cut Dress 3.0 - 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 - 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 - 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 - 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 - 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 - 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 - 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 - 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 - 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 - 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 - 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 - 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 - 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 - 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4-8 Kids Kurta 1.5 m Poly Muslin age 4-8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 - 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Bulk pricing 6 metres and above - 10% off 25 metres and above - 15% off 50 metres and above - 20% off 100 metres and above - 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Maxi Dress - 3.5 - 4.0 m; Dress - 3.5 - 4.0 m; Co-ord Set - 3.5 - 4.0 m; Kurti - 2.75 m; Saree Blouse - 1.25 m; Shirt - 2.5 - 3.0 m; Men's Shirt - 2.5 - 3.0 m; Skirt - 2.25 - 2.75 m; Kids Frock - 1.75 m; Scarf - 1.0 - 2.0 m (all at 44 inch width). The full chart on this page covers 37 garment types including menswear, kids wear and home furnishing. How should I lay out and cut this print? This is an all-over, non-directional print, so pattern pieces can be nested either way up to save cloth. No special matching is needed at the seams. Which fabric quality suits this print best? This listing is Poly Spandex. If you need the same artwork on a different quality - a crisper shirting, a heavier satin, a viscose - we print it to order on any of our 17 bases. Message us using the WhatsApp button on this page. What colours does this pair with? The ground reads as White and the accent as Black. The measured shades in the artwork are approximately #D8D8D8, #505050, so you can match trims, linings and thread against those directly. Can I get this in a different colour or scale? Yes. Design 4029 can be recoloured to any Pantone shade, and the print scale can be enlarged or reduced before bulk production, at no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. Our team works with 250+ producible base fabrics in total. Only our 17 highest-volume bases are listed on the website - the full range covers viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp for a specific base. Minimum for an off-catalogue base is 100 metres, and it needs extra lead time. Is this fabric ready stock or made to order? This length is printed to order on Poly Spandex. Nothing is pre-made stock - we print each order specially, so the design can be recoloured, rescaled, or printed on any of our 17 base cloths. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers. Note that 1 unit = 1 metre. How long does delivery take? We dispatch in 4-7 days from order confirmation - that is the printing and finishing time at our Surat mill. Courier transit after that depends on your location in India. Free shipping on orders above Rs1,199 within India. Need a different colour, scale or a base not listed? Our team works with 250+ base fabrics. Message us on WhatsApp or email info@clothwala.com - mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

White & Black Op-Art Wave Lines Printed Spandex Fabric - Horizontal layout of smooth black wave lines that swell and taper as they rise and dip together, giving an optical ripple effect, medium scale on a white ground in two colours, printed to order on Poly Spandex and sold by the metre. Available from 1 metre with flexible wholesale minimums, made at our Surat mill and dispatched in 4-7 days. About this print Design 4028 is horizontal layout of smooth black wave lines that swell and taper as they rise and dip together, giving an optical ripple effect, medium scale on a white ground in two colours. The scale is stripe set repeats approx. every 1/3 of image width. This is an all-over, non-directional print, so pattern pieces can be nested either way up to make the most of the cloth. Measured shades in the artwork run approximately #FEFEFE, #040404, so trims, linings and thread can be matched directly against those values. Part of the Clothwala 2026 digital-print range. Fabric needed per garment Quantities below are for a standard non-directional layout at 44 inch width. These allow for one-way (directional) cutting - every piece laid the same way, which is how a print like this must be cut. The full chart further down gives the plain figure without that allowance. All quantities are estimates for a standard size; confirm against your own pattern before ordering. Garment Fabric needed Recommended quality Maxi Dress 3.5 - 4.0 m Poly Georgette (70-90 GSM) Dress 3.5 - 4.0 m Poly Crepe (80-95 GSM) Co-ord Set 3.5 - 4.0 m Poly Crepe (80-95 GSM) Kurti 2.75 m Poly Crepe (80-95 GSM) Saree Blouse 1.25 m Poly Japanese Satin (90-110 GSM) Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Men's Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Skirt 2.25 - 2.75 m Viscose Crepe (110-140 GSM) Kids Frock 1.75 m Cotton Cambric (80-110 GSM) Scarf 1.0 - 2.0 m Poly Chiffon (60-80 GSM) Specifications Design code 4028 Print Op-Art Wave Lines - Horizontal layout of smooth black wave lines that swell and taper as they rise and dip together, giving an optical ripple effect, medium scale on a white ground in two colours Ground colour White Accent colour Black Approx. shades #FEFEFE, #040404 Print scale Stripe set repeats approx. every 1/3 of image width Repeat All-over / non-directional Suitable garments Dress, Shirt, Co-ord Set, Skirt, Palazzo, Maxi Dress, Top Fabric Poly Spandex Composition Polyester Stretch Stretchable - 7% Lycra (spandex) GSM 200 gsm (this fabric) Width 54 inch Minimum order From 1 metre; flexible wholesale minimums Production Made to order - customisable Dispatch 4-7 days from our Surat mill Other bases The same artwork prints on any of our 17 bases - ask for a quote Printing High-definition digital print, wash-fast Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Full fabric requirement chart This design is printed on Poly Spandex here, and the same artwork prints to order on any of our 17 base cloths. Quantities are at 44 inch width. Plain figures for a standard size, without a directional-cut allowance - add roughly 0.5 m per garment if every piece must be laid the same way. Estimates: confirm against your own pattern before ordering. Fabric needed for 37 garment types - womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 - 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 - 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 - 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 - 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 - 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 - 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 - 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 - 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 - 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 - 3.5 m Poly Crepe one-piece cut Dress 3.0 - 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 - 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 - 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 - 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 - 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 - 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 - 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 - 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 - 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 - 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 - 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 - 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 - 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 - 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4-8 Kids Kurta 1.5 m Poly Muslin age 4-8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 - 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Bulk pricing 6 metres and above - 10% off 25 metres and above - 15% off 50 metres and above - 20% off 100 metres and above - 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Maxi Dress - 3.5 - 4.0 m; Dress - 3.5 - 4.0 m; Co-ord Set - 3.5 - 4.0 m; Kurti - 2.75 m; Saree Blouse - 1.25 m; Shirt - 2.5 - 3.0 m; Men's Shirt - 2.5 - 3.0 m; Skirt - 2.25 - 2.75 m; Kids Frock - 1.75 m; Scarf - 1.0 - 2.0 m (all at 44 inch width). The full chart on this page covers 37 garment types including menswear, kids wear and home furnishing. How should I lay out and cut this print? This is an all-over, non-directional print, so pattern pieces can be nested either way up to save cloth. No special matching is needed at the seams. Which fabric quality suits this print best? This listing is Poly Spandex. If you need the same artwork on a different quality - a crisper shirting, a heavier satin, a viscose - we print it to order on any of our 17 bases. Message us using the WhatsApp button on this page. What colours does this pair with? The ground reads as White and the accent as Black. The measured shades in the artwork are approximately #FEFEFE, #040404, so you can match trims, linings and thread against those directly. Can I get this in a different colour or scale? Yes. Design 4028 can be recoloured to any Pantone shade, and the print scale can be enlarged or reduced before bulk production, at no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. Our team works with 250+ producible base fabrics in total. Only our 17 highest-volume bases are listed on the website - the full range covers viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp for a specific base. Minimum for an off-catalogue base is 100 metres, and it needs extra lead time. Is this fabric ready stock or made to order? This length is printed to order on Poly Spandex. Nothing is pre-made stock - we print each order specially, so the design can be recoloured, rescaled, or printed on any of our 17 base cloths. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers. Note that 1 unit = 1 metre. How long does delivery take? We dispatch in 4-7 days from order confirmation - that is the printing and finishing time at our Surat mill. Courier transit after that depends on your location in India. Free shipping on orders above Rs1,199 within India. Need a different colour, scale or a base not listed? Our team works with 250+ base fabrics. Message us on WhatsApp or email info@clothwala.com - mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

Cream & Black Broken V Chevrons Printed Spandex Fabric - Horizontal rows of short, thick black V-shaped chevron marks, offset and partly broken so the zigzag is interrupted, small scale on a mottled cream and white ground, printed to order on Poly Spandex and sold by the metre. Available from 1 metre with flexible wholesale minimums, made at our Surat mill and dispatched in 4-7 days. About this print Design 4027 is horizontal rows of short, thick black v-shaped chevron marks, offset and partly broken so the zigzag is interrupted, small scale on a mottled cream and white ground. The scale is small (main motif approx. 1/12 of image width). This is an all-over, non-directional print, so pattern pieces can be nested either way up to make the most of the cloth. Measured shades in the artwork run approximately #EBEDDE, #0A0A0A, #ADAEA7, so trims, linings and thread can be matched directly against those values. Part of the Clothwala 2026 digital-print range. Fabric needed per garment Quantities below are for a standard non-directional layout at 44 inch width. These allow for one-way (directional) cutting - every piece laid the same way, which is how a print like this must be cut. The full chart further down gives the plain figure without that allowance. All quantities are estimates for a standard size; confirm against your own pattern before ordering. Garment Fabric needed Recommended quality Maxi Dress 3.5 - 4.0 m Poly Georgette (70-90 GSM) Dress 3.5 - 4.0 m Poly Crepe (80-95 GSM) Co-ord Set 3.5 - 4.0 m Poly Crepe (80-95 GSM) Kurti 2.75 m Poly Crepe (80-95 GSM) Saree Blouse 1.25 m Poly Japanese Satin (90-110 GSM) Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Men's Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Skirt 2.25 - 2.75 m Viscose Crepe (110-140 GSM) Kids Frock 1.75 m Cotton Cambric (80-110 GSM) Scarf 1.0 - 2.0 m Poly Chiffon (60-80 GSM) Specifications Design code 4027 Print Broken V Chevrons - Horizontal rows of short, thick black V-shaped chevron marks, offset and partly broken so the zigzag is interrupted, small scale on a mottled cream and white ground Ground colour Cream Accent colour Black Approx. shades #EBEDDE, #0A0A0A, #ADAEA7 Print scale Small (main motif approx. 1/12 of image width) Repeat All-over / non-directional Suitable garments Shirt, Dress, Blouse, Co-ord Set, Skirt, Tunic, Men's Shirt Fabric Poly Spandex Composition Polyester Stretch Stretchable - 7% Lycra (spandex) GSM 200 gsm (this fabric) Width 54 inch Minimum order From 1 metre; flexible wholesale minimums Production Made to order - customisable Dispatch 4-7 days from our Surat mill Other bases The same artwork prints on any of our 17 bases - ask for a quote Printing High-definition digital print, wash-fast Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Full fabric requirement chart This design is printed on Poly Spandex here, and the same artwork prints to order on any of our 17 base cloths. Quantities are at 44 inch width. Plain figures for a standard size, without a directional-cut allowance - add roughly 0.5 m per garment if every piece must be laid the same way. Estimates: confirm against your own pattern before ordering. Fabric needed for 37 garment types - womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 - 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 - 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 - 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 - 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 - 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 - 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 - 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 - 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 - 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 - 3.5 m Poly Crepe one-piece cut Dress 3.0 - 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 - 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 - 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 - 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 - 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 - 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 - 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 - 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 - 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 - 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 - 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 - 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 - 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 - 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4-8 Kids Kurta 1.5 m Poly Muslin age 4-8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 - 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Bulk pricing 6 metres and above - 10% off 25 metres and above - 15% off 50 metres and above - 20% off 100 metres and above - 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Maxi Dress - 3.5 - 4.0 m; Dress - 3.5 - 4.0 m; Co-ord Set - 3.5 - 4.0 m; Kurti - 2.75 m; Saree Blouse - 1.25 m; Shirt - 2.5 - 3.0 m; Men's Shirt - 2.5 - 3.0 m; Skirt - 2.25 - 2.75 m; Kids Frock - 1.75 m; Scarf - 1.0 - 2.0 m (all at 44 inch width). The full chart on this page covers 37 garment types including menswear, kids wear and home furnishing. How should I lay out and cut this print? This is an all-over, non-directional print, so pattern pieces can be nested either way up to save cloth. No special matching is needed at the seams. Which fabric quality suits this print best? This listing is Poly Spandex. If you need the same artwork on a different quality - a crisper shirting, a heavier satin, a viscose - we print it to order on any of our 17 bases. Message us using the WhatsApp button on this page. What colours does this pair with? The ground reads as Cream and the accent as Black. The measured shades in the artwork are approximately #EBEDDE, #0A0A0A, #ADAEA7, so you can match trims, linings and thread against those directly. Can I get this in a different colour or scale? Yes. Design 4027 can be recoloured to any Pantone shade, and the print scale can be enlarged or reduced before bulk production, at no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. Our team works with 250+ producible base fabrics in total. Only our 17 highest-volume bases are listed on the website - the full range covers viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp for a specific base. Minimum for an off-catalogue base is 100 metres, and it needs extra lead time. Is this fabric ready stock or made to order? This length is printed to order on Poly Spandex. Nothing is pre-made stock - we print each order specially, so the design can be recoloured, rescaled, or printed on any of our 17 base cloths. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers. Note that 1 unit = 1 metre. How long does delivery take? We dispatch in 4-7 days from order confirmation - that is the printing and finishing time at our Surat mill. Courier transit after that depends on your location in India. Free shipping on orders above Rs1,199 within India. Need a different colour, scale or a base not listed? Our team works with 250+ base fabrics. Message us on WhatsApp or email info@clothwala.com - mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

Off-White & Black Bold Wavy Bands Printed Spandex Fabric - Horizontal stripe layout of thick flat black wavy bands with rounded irregular crests, alternating with off-white bands of similar width, bold scale in two colours, printed to order on Poly Spandex and sold by the metre. Available from 1 metre with flexible wholesale minimums, made at our Surat mill and dispatched in 4-7 days. About this print Design 4026 is horizontal stripe layout of thick flat black wavy bands with rounded irregular crests, alternating with off-white bands of similar width, bold scale in two colours. The scale is stripe set repeats approx. every 1/8 of image width. This is an all-over, non-directional print, so pattern pieces can be nested either way up to make the most of the cloth. Measured shades in the artwork run approximately #ECECEC, #050505, so trims, linings and thread can be matched directly against those values. Part of the Clothwala 2026 digital-print range. Fabric needed per garment Quantities below are for a standard non-directional layout at 44 inch width. These allow for one-way (directional) cutting - every piece laid the same way, which is how a print like this must be cut. The full chart further down gives the plain figure without that allowance. All quantities are estimates for a standard size; confirm against your own pattern before ordering. Garment Fabric needed Recommended quality Maxi Dress 3.5 - 4.0 m Poly Georgette (70-90 GSM) Dress 3.5 - 4.0 m Poly Crepe (80-95 GSM) Co-ord Set 3.5 - 4.0 m Poly Crepe (80-95 GSM) Kurti 2.75 m Poly Crepe (80-95 GSM) Saree Blouse 1.25 m Poly Japanese Satin (90-110 GSM) Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Men's Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Skirt 2.25 - 2.75 m Viscose Crepe (110-140 GSM) Kids Frock 1.75 m Cotton Cambric (80-110 GSM) Scarf 1.0 - 2.0 m Poly Chiffon (60-80 GSM) Specifications Design code 4026 Print Bold Wavy Bands - Horizontal stripe layout of thick flat black wavy bands with rounded irregular crests, alternating with off-white bands of similar width, bold scale in two colours Ground colour Off-White Accent colour Black Approx. shades #ECECEC, #050505 Print scale Stripe set repeats approx. every 1/8 of image width Repeat All-over / non-directional Suitable garments Dress, Shirt, Co-ord Set, Skirt, Palazzo, Resort Shirt, Top Fabric Poly Spandex Composition Polyester Stretch Stretchable - 7% Lycra (spandex) GSM 200 gsm (this fabric) Width 54 inch Minimum order From 1 metre; flexible wholesale minimums Production Made to order - customisable Dispatch 4-7 days from our Surat mill Other bases The same artwork prints on any of our 17 bases - ask for a quote Printing High-definition digital print, wash-fast Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Full fabric requirement chart This design is printed on Poly Spandex here, and the same artwork prints to order on any of our 17 base cloths. Quantities are at 44 inch width. Plain figures for a standard size, without a directional-cut allowance - add roughly 0.5 m per garment if every piece must be laid the same way. Estimates: confirm against your own pattern before ordering. Fabric needed for 37 garment types - womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 - 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 - 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 - 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 - 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 - 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 - 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 - 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 - 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 - 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 - 3.5 m Poly Crepe one-piece cut Dress 3.0 - 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 - 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 - 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 - 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 - 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 - 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 - 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 - 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 - 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 - 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 - 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 - 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 - 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 - 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4-8 Kids Kurta 1.5 m Poly Muslin age 4-8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 - 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Bulk pricing 6 metres and above - 10% off 25 metres and above - 15% off 50 metres and above - 20% off 100 metres and above - 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Maxi Dress - 3.5 - 4.0 m; Dress - 3.5 - 4.0 m; Co-ord Set - 3.5 - 4.0 m; Kurti - 2.75 m; Saree Blouse - 1.25 m; Shirt - 2.5 - 3.0 m; Men's Shirt - 2.5 - 3.0 m; Skirt - 2.25 - 2.75 m; Kids Frock - 1.75 m; Scarf - 1.0 - 2.0 m (all at 44 inch width). The full chart on this page covers 37 garment types including menswear, kids wear and home furnishing. How should I lay out and cut this print? This is an all-over, non-directional print, so pattern pieces can be nested either way up to save cloth. No special matching is needed at the seams. Which fabric quality suits this print best? This listing is Poly Spandex. If you need the same artwork on a different quality - a crisper shirting, a heavier satin, a viscose - we print it to order on any of our 17 bases. Message us using the WhatsApp button on this page. What colours does this pair with? The ground reads as Off-White and the accent as Black. The measured shades in the artwork are approximately #ECECEC, #050505, so you can match trims, linings and thread against those directly. Can I get this in a different colour or scale? Yes. Design 4026 can be recoloured to any Pantone shade, and the print scale can be enlarged or reduced before bulk production, at no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. Our team works with 250+ producible base fabrics in total. Only our 17 highest-volume bases are listed on the website - the full range covers viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp for a specific base. Minimum for an off-catalogue base is 100 metres, and it needs extra lead time. Is this fabric ready stock or made to order? This length is printed to order on Poly Spandex. Nothing is pre-made stock - we print each order specially, so the design can be recoloured, rescaled, or printed on any of our 17 base cloths. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers. Note that 1 unit = 1 metre. How long does delivery take? We dispatch in 4-7 days from order confirmation - that is the printing and finishing time at our Surat mill. Courier transit after that depends on your location in India. Free shipping on orders above Rs1,199 within India. Need a different colour, scale or a base not listed? Our team works with 250+ base fabrics. Message us on WhatsApp or email info@clothwala.com - mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

Cream & Black Shaded Chevron Zigzag Printed Spandex Fabric - Dense rows of thick black chevron zigzags with painted, uneven edges on a cream ground, crossed at intervals by soft tan shadow bands, medium-small scale with heavy black coverage, printed to order on Poly Spandex and sold by the metre. Available from 1 metre with flexible wholesale minimums, made at our Surat mill and dispatched in 4-7 days. About this print Design 4025 is dense rows of thick black chevron zigzags with painted, uneven edges on a cream ground, crossed at intervals by soft tan shadow bands, medium-small scale with heavy black coverage. The scale is medium (main motif approx. 1/6 of image width). This is an all-over, non-directional print, so pattern pieces can be nested either way up to make the most of the cloth. Measured shades in the artwork run approximately #D8DBCA, #131408, #797A6A, so trims, linings and thread can be matched directly against those values. Part of the Clothwala 2026 digital-print range. Fabric needed per garment Quantities below are for a standard non-directional layout at 44 inch width. These allow for one-way (directional) cutting - every piece laid the same way, which is how a print like this must be cut. The full chart further down gives the plain figure without that allowance. All quantities are estimates for a standard size; confirm against your own pattern before ordering. Garment Fabric needed Recommended quality Maxi Dress 3.5 - 4.0 m Poly Georgette (70-90 GSM) Dress 3.5 - 4.0 m Poly Crepe (80-95 GSM) Co-ord Set 3.5 - 4.0 m Poly Crepe (80-95 GSM) Kurti 2.75 m Poly Crepe (80-95 GSM) Saree Blouse 1.25 m Poly Japanese Satin (90-110 GSM) Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Men's Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Skirt 2.25 - 2.75 m Viscose Crepe (110-140 GSM) Kids Frock 1.75 m Cotton Cambric (80-110 GSM) Scarf 1.0 - 2.0 m Poly Chiffon (60-80 GSM) Specifications Design code 4025 Print Shaded Chevron Zigzag - Dense rows of thick black chevron zigzags with painted, uneven edges on a cream ground, crossed at intervals by soft tan shadow bands, medium-small scale with heavy black coverage Ground colour Cream Accent colour Black Approx. shades #D8DBCA, #131408, #797A6A Print scale Medium (main motif approx. 1/6 of image width) Repeat All-over / non-directional Suitable garments Dress, Shirt, Co-ord Set, Skirt, Kaftan, Palazzo, Tunic Fabric Poly Spandex Composition Polyester Stretch Stretchable - 7% Lycra (spandex) GSM 200 gsm (this fabric) Width 54 inch Minimum order From 1 metre; flexible wholesale minimums Production Made to order - customisable Dispatch 4-7 days from our Surat mill Other bases The same artwork prints on any of our 17 bases - ask for a quote Printing High-definition digital print, wash-fast Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Full fabric requirement chart This design is printed on Poly Spandex here, and the same artwork prints to order on any of our 17 base cloths. Quantities are at 44 inch width. Plain figures for a standard size, without a directional-cut allowance - add roughly 0.5 m per garment if every piece must be laid the same way. Estimates: confirm against your own pattern before ordering. Fabric needed for 37 garment types - womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 - 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 - 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 - 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 - 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 - 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 - 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 - 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 - 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 - 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 - 3.5 m Poly Crepe one-piece cut Dress 3.0 - 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 - 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 - 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 - 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 - 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 - 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 - 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 - 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 - 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 - 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 - 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 - 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 - 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 - 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4-8 Kids Kurta 1.5 m Poly Muslin age 4-8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 - 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Bulk pricing 6 metres and above - 10% off 25 metres and above - 15% off 50 metres and above - 20% off 100 metres and above - 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Maxi Dress - 3.5 - 4.0 m; Dress - 3.5 - 4.0 m; Co-ord Set - 3.5 - 4.0 m; Kurti - 2.75 m; Saree Blouse - 1.25 m; Shirt - 2.5 - 3.0 m; Men's Shirt - 2.5 - 3.0 m; Skirt - 2.25 - 2.75 m; Kids Frock - 1.75 m; Scarf - 1.0 - 2.0 m (all at 44 inch width). The full chart on this page covers 37 garment types including menswear, kids wear and home furnishing. How should I lay out and cut this print? This is an all-over, non-directional print, so pattern pieces can be nested either way up to save cloth. No special matching is needed at the seams. Which fabric quality suits this print best? This listing is Poly Spandex. If you need the same artwork on a different quality - a crisper shirting, a heavier satin, a viscose - we print it to order on any of our 17 bases. Message us using the WhatsApp button on this page. What colours does this pair with? The ground reads as Cream and the accent as Black. The measured shades in the artwork are approximately #D8DBCA, #131408, #797A6A, so you can match trims, linings and thread against those directly. Can I get this in a different colour or scale? Yes. Design 4025 can be recoloured to any Pantone shade, and the print scale can be enlarged or reduced before bulk production, at no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. Our team works with 250+ producible base fabrics in total. Only our 17 highest-volume bases are listed on the website - the full range covers viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp for a specific base. Minimum for an off-catalogue base is 100 metres, and it needs extra lead time. Is this fabric ready stock or made to order? This length is printed to order on Poly Spandex. Nothing is pre-made stock - we print each order specially, so the design can be recoloured, rescaled, or printed on any of our 17 base cloths. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers. Note that 1 unit = 1 metre. How long does delivery take? We dispatch in 4-7 days from order confirmation - that is the printing and finishing time at our Surat mill. Courier transit after that depends on your location in India. Free shipping on orders above Rs1,199 within India. Need a different colour, scale or a base not listed? Our team works with 250+ base fabrics. Message us on WhatsApp or email info@clothwala.com - mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

White & Black Inked Herringbone Columns Printed Spandex Fabric - Dense all-over herringbone of thin, slightly uneven black ink chevron lines running in vertical columns on a white ground, with faint grey smudging at intervals, printed to order on Poly Spandex and sold by the metre. Available from 1 metre with flexible wholesale minimums, made at our Surat mill and dispatched in 4-7 days. About this print Design 4024 is dense all-over herringbone of thin, slightly uneven black ink chevron lines running in vertical columns on a white ground, with faint grey smudging at intervals. The scale is medium (main motif approx. 1/10 of image width). This is an all-over, non-directional print, so pattern pieces can be nested either way up to make the most of the cloth. Measured shades in the artwork run approximately #CCCCCC, #2D2D2D, #888888, so trims, linings and thread can be matched directly against those values. Part of the Clothwala 2026 digital-print range. Fabric needed per garment Quantities below are for a standard non-directional layout at 44 inch width. These allow for one-way (directional) cutting - every piece laid the same way, which is how a print like this must be cut. The full chart further down gives the plain figure without that allowance. All quantities are estimates for a standard size; confirm against your own pattern before ordering. Garment Fabric needed Recommended quality Maxi Dress 3.5 - 4.0 m Poly Georgette (70-90 GSM) Dress 3.5 - 4.0 m Poly Crepe (80-95 GSM) Co-ord Set 3.5 - 4.0 m Poly Crepe (80-95 GSM) Kurti 2.75 m Poly Crepe (80-95 GSM) Saree Blouse 1.25 m Poly Japanese Satin (90-110 GSM) Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Men's Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Skirt 2.25 - 2.75 m Viscose Crepe (110-140 GSM) Kids Frock 1.75 m Cotton Cambric (80-110 GSM) Scarf 1.0 - 2.0 m Poly Chiffon (60-80 GSM) Specifications Design code 4024 Print Inked Herringbone Columns - Dense all-over herringbone of thin, slightly uneven black ink chevron lines running in vertical columns on a white ground, with faint grey smudging at intervals Ground colour White Accent colour Black Approx. shades #CCCCCC, #2D2D2D, #888888 Print scale Medium (main motif approx. 1/10 of image width) Repeat All-over / non-directional Suitable garments Shirt, Dress, Trousers, Co-ord Set, Skirt, Tunic, Men's Shirt Fabric Poly Spandex Composition Polyester Stretch Stretchable - 7% Lycra (spandex) GSM 200 gsm (this fabric) Width 54 inch Minimum order From 1 metre; flexible wholesale minimums Production Made to order - customisable Dispatch 4-7 days from our Surat mill Other bases The same artwork prints on any of our 17 bases - ask for a quote Printing High-definition digital print, wash-fast Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Full fabric requirement chart This design is printed on Poly Spandex here, and the same artwork prints to order on any of our 17 base cloths. Quantities are at 44 inch width. Plain figures for a standard size, without a directional-cut allowance - add roughly 0.5 m per garment if every piece must be laid the same way. Estimates: confirm against your own pattern before ordering. Fabric needed for 37 garment types - womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 - 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 - 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 - 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 - 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 - 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 - 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 - 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 - 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 - 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 - 3.5 m Poly Crepe one-piece cut Dress 3.0 - 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 - 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 - 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 - 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 - 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 - 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 - 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 - 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 - 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 - 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 - 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 - 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 - 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 - 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4-8 Kids Kurta 1.5 m Poly Muslin age 4-8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 - 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Bulk pricing 6 metres and above - 10% off 25 metres and above - 15% off 50 metres and above - 20% off 100 metres and above - 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Maxi Dress - 3.5 - 4.0 m; Dress - 3.5 - 4.0 m; Co-ord Set - 3.5 - 4.0 m; Kurti - 2.75 m; Saree Blouse - 1.25 m; Shirt - 2.5 - 3.0 m; Men's Shirt - 2.5 - 3.0 m; Skirt - 2.25 - 2.75 m; Kids Frock - 1.75 m; Scarf - 1.0 - 2.0 m (all at 44 inch width). The full chart on this page covers 37 garment types including menswear, kids wear and home furnishing. How should I lay out and cut this print? This is an all-over, non-directional print, so pattern pieces can be nested either way up to save cloth. No special matching is needed at the seams. Which fabric quality suits this print best? This listing is Poly Spandex. If you need the same artwork on a different quality - a crisper shirting, a heavier satin, a viscose - we print it to order on any of our 17 bases. Message us using the WhatsApp button on this page. What colours does this pair with? The ground reads as White and the accent as Black. The measured shades in the artwork are approximately #CCCCCC, #2D2D2D, #888888, so you can match trims, linings and thread against those directly. Can I get this in a different colour or scale? Yes. Design 4024 can be recoloured to any Pantone shade, and the print scale can be enlarged or reduced before bulk production, at no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. Our team works with 250+ producible base fabrics in total. Only our 17 highest-volume bases are listed on the website - the full range covers viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp for a specific base. Minimum for an off-catalogue base is 100 metres, and it needs extra lead time. Is this fabric ready stock or made to order? This length is printed to order on Poly Spandex. Nothing is pre-made stock - we print each order specially, so the design can be recoloured, rescaled, or printed on any of our 17 base cloths. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers. Note that 1 unit = 1 metre. How long does delivery take? We dispatch in 4-7 days from order confirmation - that is the printing and finishing time at our Surat mill. Courier transit after that depends on your location in India. Free shipping on orders above Rs1,199 within India. Need a different colour, scale or a base not listed? Our team works with 250+ base fabrics. Message us on WhatsApp or email info@clothwala.com - mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

Cream & Black Blurred Zigzag Bands Printed Spandex Fabric - Closely stacked horizontal rows of black zigzag lines that vary in thickness and amplitude, with soft blurred edges and faint beige tinting, on a cream ground at small scale, printed to order on Poly Spandex and sold by the metre. Available from 1 metre with flexible wholesale minimums, made at our Surat mill and dispatched in 4-7 days. About this print Design 4023 is closely stacked horizontal rows of black zigzag lines that vary in thickness and amplitude, with soft blurred edges and faint beige tinting, on a cream ground at small scale. The scale is small (main motif approx. 1/12 of image width). This is an all-over, non-directional print, so pattern pieces can be nested either way up to make the most of the cloth. Measured shades in the artwork run approximately #F8F8EC, #0C0D09, #7B7A6F, so trims, linings and thread can be matched directly against those values. Part of the Clothwala 2026 digital-print range. Fabric needed per garment Quantities below are for a standard non-directional layout at 44 inch width. These allow for one-way (directional) cutting - every piece laid the same way, which is how a print like this must be cut. The full chart further down gives the plain figure without that allowance. All quantities are estimates for a standard size; confirm against your own pattern before ordering. Garment Fabric needed Recommended quality Maxi Dress 3.5 - 4.0 m Poly Georgette (70-90 GSM) Dress 3.5 - 4.0 m Poly Crepe (80-95 GSM) Co-ord Set 3.5 - 4.0 m Poly Crepe (80-95 GSM) Kurti 2.75 m Poly Crepe (80-95 GSM) Saree Blouse 1.25 m Poly Japanese Satin (90-110 GSM) Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Men's Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Skirt 2.25 - 2.75 m Viscose Crepe (110-140 GSM) Kids Frock 1.75 m Cotton Cambric (80-110 GSM) Scarf 1.0 - 2.0 m Poly Chiffon (60-80 GSM) Specifications Design code 4023 Print Blurred Zigzag Bands - Closely stacked horizontal rows of black zigzag lines that vary in thickness and amplitude, with soft blurred edges and faint beige tinting, on a cream ground at small scale Ground colour Cream Accent colour Black Approx. shades #F8F8EC, #0C0D09, #7B7A6F Print scale Small (main motif approx. 1/12 of image width) Repeat All-over / non-directional Suitable garments Dress, Shirt, Co-ord Set, Skirt, Kaftan, Palazzo, Top Fabric Poly Spandex Composition Polyester Stretch Stretchable - 7% Lycra (spandex) GSM 200 gsm (this fabric) Width 54 inch Minimum order From 1 metre; flexible wholesale minimums Production Made to order - customisable Dispatch 4-7 days from our Surat mill Other bases The same artwork prints on any of our 17 bases - ask for a quote Printing High-definition digital print, wash-fast Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Full fabric requirement chart This design is printed on Poly Spandex here, and the same artwork prints to order on any of our 17 base cloths. Quantities are at 44 inch width. Plain figures for a standard size, without a directional-cut allowance - add roughly 0.5 m per garment if every piece must be laid the same way. Estimates: confirm against your own pattern before ordering. Fabric needed for 37 garment types - womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 - 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 - 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 - 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 - 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 - 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 - 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 - 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 - 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 - 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 - 3.5 m Poly Crepe one-piece cut Dress 3.0 - 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 - 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 - 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 - 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 - 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 - 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 - 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 - 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 - 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 - 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 - 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 - 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 - 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 - 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4-8 Kids Kurta 1.5 m Poly Muslin age 4-8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 - 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Bulk pricing 6 metres and above - 10% off 25 metres and above - 15% off 50 metres and above - 20% off 100 metres and above - 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Maxi Dress - 3.5 - 4.0 m; Dress - 3.5 - 4.0 m; Co-ord Set - 3.5 - 4.0 m; Kurti - 2.75 m; Saree Blouse - 1.25 m; Shirt - 2.5 - 3.0 m; Men's Shirt - 2.5 - 3.0 m; Skirt - 2.25 - 2.75 m; Kids Frock - 1.75 m; Scarf - 1.0 - 2.0 m (all at 44 inch width). The full chart on this page covers 37 garment types including menswear, kids wear and home furnishing. How should I lay out and cut this print? This is an all-over, non-directional print, so pattern pieces can be nested either way up to save cloth. No special matching is needed at the seams. Which fabric quality suits this print best? This listing is Poly Spandex. If you need the same artwork on a different quality - a crisper shirting, a heavier satin, a viscose - we print it to order on any of our 17 bases. Message us using the WhatsApp button on this page. What colours does this pair with? The ground reads as Cream and the accent as Black. The measured shades in the artwork are approximately #F8F8EC, #0C0D09, #7B7A6F, so you can match trims, linings and thread against those directly. Can I get this in a different colour or scale? Yes. Design 4023 can be recoloured to any Pantone shade, and the print scale can be enlarged or reduced before bulk production, at no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. Our team works with 250+ producible base fabrics in total. Only our 17 highest-volume bases are listed on the website - the full range covers viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp for a specific base. Minimum for an off-catalogue base is 100 metres, and it needs extra lead time. Is this fabric ready stock or made to order? This length is printed to order on Poly Spandex. Nothing is pre-made stock - we print each order specially, so the design can be recoloured, rescaled, or printed on any of our 17 base cloths. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers. Note that 1 unit = 1 metre. How long does delivery take? We dispatch in 4-7 days from order confirmation - that is the printing and finishing time at our Surat mill. Courier transit after that depends on your location in India. Free shipping on orders above Rs1,199 within India. Need a different colour, scale or a base not listed? Our team works with 250+ base fabrics. Message us on WhatsApp or email info@clothwala.com - mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

White & Black Watercolour Zigzag Rows Printed Spandex Fabric - Horizontal rows of black brush-painted zigzag lines of varying weight, some bleeding into soft grey blurred shadows, small scale on a white ground, printed to order on Poly Spandex and sold by the metre. Available from 1 metre with flexible wholesale minimums, made at our Surat mill and dispatched in 4-7 days. About this print Design 4022 is horizontal rows of black brush-painted zigzag lines of varying weight, some bleeding into soft grey blurred shadows, small scale on a white ground. The scale is medium (main motif approx. 1/11 of image width). This is an all-over, non-directional print, so pattern pieces can be nested either way up to make the most of the cloth. Measured shades in the artwork run approximately #FBFBFA, #0D0D0D, #8E8E8D, so trims, linings and thread can be matched directly against those values. Part of the Clothwala 2026 digital-print range. Fabric needed per garment Quantities below are for a standard non-directional layout at 44 inch width. These allow for one-way (directional) cutting - every piece laid the same way, which is how a print like this must be cut. The full chart further down gives the plain figure without that allowance. All quantities are estimates for a standard size; confirm against your own pattern before ordering. Garment Fabric needed Recommended quality Maxi Dress 3.5 - 4.0 m Poly Georgette (70-90 GSM) Dress 3.5 - 4.0 m Poly Crepe (80-95 GSM) Co-ord Set 3.5 - 4.0 m Poly Crepe (80-95 GSM) Kurti 2.75 m Poly Crepe (80-95 GSM) Saree Blouse 1.25 m Poly Japanese Satin (90-110 GSM) Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Men's Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Skirt 2.25 - 2.75 m Viscose Crepe (110-140 GSM) Kids Frock 1.75 m Cotton Cambric (80-110 GSM) Scarf 1.0 - 2.0 m Poly Chiffon (60-80 GSM) Specifications Design code 4022 Print Watercolour Zigzag Rows - Horizontal rows of black brush-painted zigzag lines of varying weight, some bleeding into soft grey blurred shadows, small scale on a white ground Ground colour White Accent colour Black Approx. shades #FBFBFA, #0D0D0D, #8E8E8D Print scale Medium (main motif approx. 1/11 of image width) Repeat All-over / non-directional Suitable garments Dress, Shirt, Blouse, Co-ord Set, Skirt, Kaftan, Scarf Fabric Poly Spandex Composition Polyester Stretch Stretchable - 7% Lycra (spandex) GSM 200 gsm (this fabric) Width 54 inch Minimum order From 1 metre; flexible wholesale minimums Production Made to order - customisable Dispatch 4-7 days from our Surat mill Other bases The same artwork prints on any of our 17 bases - ask for a quote Printing High-definition digital print, wash-fast Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Full fabric requirement chart This design is printed on Poly Spandex here, and the same artwork prints to order on any of our 17 base cloths. Quantities are at 44 inch width. Plain figures for a standard size, without a directional-cut allowance - add roughly 0.5 m per garment if every piece must be laid the same way. Estimates: confirm against your own pattern before ordering. Fabric needed for 37 garment types - womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 - 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 - 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 - 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 - 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 - 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 - 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 - 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 - 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 - 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 - 3.5 m Poly Crepe one-piece cut Dress 3.0 - 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 - 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 - 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 - 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 - 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 - 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 - 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 - 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 - 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 - 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 - 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 - 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 - 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 - 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4-8 Kids Kurta 1.5 m Poly Muslin age 4-8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 - 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Bulk pricing 6 metres and above - 10% off 25 metres and above - 15% off 50 metres and above - 20% off 100 metres and above - 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Maxi Dress - 3.5 - 4.0 m; Dress - 3.5 - 4.0 m; Co-ord Set - 3.5 - 4.0 m; Kurti - 2.75 m; Saree Blouse - 1.25 m; Shirt - 2.5 - 3.0 m; Men's Shirt - 2.5 - 3.0 m; Skirt - 2.25 - 2.75 m; Kids Frock - 1.75 m; Scarf - 1.0 - 2.0 m (all at 44 inch width). The full chart on this page covers 37 garment types including menswear, kids wear and home furnishing. How should I lay out and cut this print? This is an all-over, non-directional print, so pattern pieces can be nested either way up to save cloth. No special matching is needed at the seams. Which fabric quality suits this print best? This listing is Poly Spandex. If you need the same artwork on a different quality - a crisper shirting, a heavier satin, a viscose - we print it to order on any of our 17 bases. Message us using the WhatsApp button on this page. What colours does this pair with? The ground reads as White and the accent as Black. The measured shades in the artwork are approximately #FBFBFA, #0D0D0D, #8E8E8D, so you can match trims, linings and thread against those directly. Can I get this in a different colour or scale? Yes. Design 4022 can be recoloured to any Pantone shade, and the print scale can be enlarged or reduced before bulk production, at no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. Our team works with 250+ producible base fabrics in total. Only our 17 highest-volume bases are listed on the website - the full range covers viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp for a specific base. Minimum for an off-catalogue base is 100 metres, and it needs extra lead time. Is this fabric ready stock or made to order? This length is printed to order on Poly Spandex. Nothing is pre-made stock - we print each order specially, so the design can be recoloured, rescaled, or printed on any of our 17 base cloths. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers. Note that 1 unit = 1 metre. How long does delivery take? We dispatch in 4-7 days from order confirmation - that is the printing and finishing time at our Surat mill. Courier transit after that depends on your location in India. Free shipping on orders above Rs1,199 within India. Need a different colour, scale or a base not listed? Our team works with 250+ base fabrics. Message us on WhatsApp or email info@clothwala.com - mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

White & Black Fine Herringbone Chevron Printed Spandex Fabric - Tight all-over herringbone of thin hand-drawn black chevron lines on white, set in narrow vertical columns with faint horizontal shading bands, reading as a mid-grey texture from a distance, printed to order on Poly Spandex and sold by the metre. Available from 1 metre with flexible wholesale minimums, made at our Surat mill and dispatched in 4-7 days. About this print Design 4021 is tight all-over herringbone of thin hand-drawn black chevron lines on white, set in narrow vertical columns with faint horizontal shading bands, reading as a mid-grey texture from a distance. The scale is medium (main motif approx. 1/8 of image width). This is an all-over, non-directional print, so pattern pieces can be nested either way up to make the most of the cloth. Measured shades in the artwork run approximately #9D9D9D, #2A2A2A, #606060, so trims, linings and thread can be matched directly against those values. Part of the Clothwala 2026 digital-print range. Fabric needed per garment Quantities below are for a standard non-directional layout at 44 inch width. These allow for one-way (directional) cutting - every piece laid the same way, which is how a print like this must be cut. The full chart further down gives the plain figure without that allowance. All quantities are estimates for a standard size; confirm against your own pattern before ordering. Garment Fabric needed Recommended quality Maxi Dress 3.5 - 4.0 m Poly Georgette (70-90 GSM) Dress 3.5 - 4.0 m Poly Crepe (80-95 GSM) Co-ord Set 3.5 - 4.0 m Poly Crepe (80-95 GSM) Kurti 2.75 m Poly Crepe (80-95 GSM) Saree Blouse 1.25 m Poly Japanese Satin (90-110 GSM) Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Men's Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Skirt 2.25 - 2.75 m Viscose Crepe (110-140 GSM) Kids Frock 1.75 m Cotton Cambric (80-110 GSM) Scarf 1.0 - 2.0 m Poly Chiffon (60-80 GSM) Specifications Design code 4021 Print Fine Herringbone Chevron - Tight all-over herringbone of thin hand-drawn black chevron lines on white, set in narrow vertical columns with faint horizontal shading bands, reading as a mid-grey texture from a distance Ground colour White Accent colour Black Approx. shades #9D9D9D, #2A2A2A, #606060 Print scale Medium (main motif approx. 1/8 of image width) Repeat All-over / non-directional Suitable garments Shirt, Trousers, Dress, Co-ord Set, Skirt, Blazer, Men's Shirt Fabric Poly Spandex Composition Polyester Stretch Stretchable - 7% Lycra (spandex) GSM 200 gsm (this fabric) Width 54 inch Minimum order From 1 metre; flexible wholesale minimums Production Made to order - customisable Dispatch 4-7 days from our Surat mill Other bases The same artwork prints on any of our 17 bases - ask for a quote Printing High-definition digital print, wash-fast Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Full fabric requirement chart This design is printed on Poly Spandex here, and the same artwork prints to order on any of our 17 base cloths. Quantities are at 44 inch width. Plain figures for a standard size, without a directional-cut allowance - add roughly 0.5 m per garment if every piece must be laid the same way. Estimates: confirm against your own pattern before ordering. Fabric needed for 37 garment types - womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 - 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 - 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 - 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 - 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 - 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 - 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 - 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 - 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 - 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 - 3.5 m Poly Crepe one-piece cut Dress 3.0 - 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 - 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 - 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 - 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 - 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 - 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 - 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 - 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 - 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 - 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 - 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 - 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 - 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 - 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4-8 Kids Kurta 1.5 m Poly Muslin age 4-8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 - 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Bulk pricing 6 metres and above - 10% off 25 metres and above - 15% off 50 metres and above - 20% off 100 metres and above - 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Maxi Dress - 3.5 - 4.0 m; Dress - 3.5 - 4.0 m; Co-ord Set - 3.5 - 4.0 m; Kurti - 2.75 m; Saree Blouse - 1.25 m; Shirt - 2.5 - 3.0 m; Men's Shirt - 2.5 - 3.0 m; Skirt - 2.25 - 2.75 m; Kids Frock - 1.75 m; Scarf - 1.0 - 2.0 m (all at 44 inch width). The full chart on this page covers 37 garment types including menswear, kids wear and home furnishing. How should I lay out and cut this print? This is an all-over, non-directional print, so pattern pieces can be nested either way up to save cloth. No special matching is needed at the seams. Which fabric quality suits this print best? This listing is Poly Spandex. If you need the same artwork on a different quality - a crisper shirting, a heavier satin, a viscose - we print it to order on any of our 17 bases. Message us using the WhatsApp button on this page. What colours does this pair with? The ground reads as White and the accent as Black. The measured shades in the artwork are approximately #9D9D9D, #2A2A2A, #606060, so you can match trims, linings and thread against those directly. Can I get this in a different colour or scale? Yes. Design 4021 can be recoloured to any Pantone shade, and the print scale can be enlarged or reduced before bulk production, at no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. Our team works with 250+ producible base fabrics in total. Only our 17 highest-volume bases are listed on the website - the full range covers viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp for a specific base. Minimum for an off-catalogue base is 100 metres, and it needs extra lead time. Is this fabric ready stock or made to order? This length is printed to order on Poly Spandex. Nothing is pre-made stock - we print each order specially, so the design can be recoloured, rescaled, or printed on any of our 17 base cloths. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers. Note that 1 unit = 1 metre. How long does delivery take? We dispatch in 4-7 days from order confirmation - that is the printing and finishing time at our Surat mill. Courier transit after that depends on your location in India. Free shipping on orders above Rs1,199 within India. Need a different colour, scale or a base not listed? Our team works with 250+ base fabrics. Message us on WhatsApp or email info@clothwala.com - mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

White & Black Flowing Ripple Lines Printed Spandex Fabric - Dense all-over layout of thin black wavy lines that flow horizontally, merging and splitting like ripples or zebra-style striations, on a white ground in two colours, printed to order on Poly Spandex and sold by the metre. Available from 1 metre with flexible wholesale minimums, made at our Surat mill and dispatched in 4-7 days. About this print Design 4020 is dense all-over layout of thin black wavy lines that flow horizontally, merging and splitting like ripples or zebra-style striations, on a white ground in two colours. The scale is large (main motif approx. 1/5 of image width). This is an all-over, non-directional print, so pattern pieces can be nested either way up to make the most of the cloth. Measured shades in the artwork run approximately #E1E1E1, #3D3D3D, so trims, linings and thread can be matched directly against those values. Part of the Clothwala 2026 digital-print range. Fabric needed per garment Quantities below are for a standard non-directional layout at 44 inch width. These allow for one-way (directional) cutting - every piece laid the same way, which is how a print like this must be cut. The full chart further down gives the plain figure without that allowance. All quantities are estimates for a standard size; confirm against your own pattern before ordering. Garment Fabric needed Recommended quality Maxi Dress 3.5 - 4.0 m Poly Georgette (70-90 GSM) Dress 3.5 - 4.0 m Poly Crepe (80-95 GSM) Co-ord Set 3.5 - 4.0 m Poly Crepe (80-95 GSM) Kurti 2.75 m Poly Crepe (80-95 GSM) Saree Blouse 1.25 m Poly Japanese Satin (90-110 GSM) Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Men's Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Skirt 2.25 - 2.75 m Viscose Crepe (110-140 GSM) Kids Frock 1.75 m Cotton Cambric (80-110 GSM) Scarf 1.0 - 2.0 m Poly Chiffon (60-80 GSM) Specifications Design code 4020 Print Flowing Ripple Lines - Dense all-over layout of thin black wavy lines that flow horizontally, merging and splitting like ripples or zebra-style striations, on a white ground in two colours Ground colour White Accent colour Black Approx. shades #E1E1E1, #3D3D3D Print scale Large (main motif approx. 1/5 of image width) Repeat All-over / non-directional Suitable garments Shirt, Dress, Co-ord Set, Skirt, Blouse, Palazzo, Scarf Fabric Poly Spandex Composition Polyester Stretch Stretchable - 7% Lycra (spandex) GSM 200 gsm (this fabric) Width 54 inch Minimum order From 1 metre; flexible wholesale minimums Production Made to order - customisable Dispatch 4-7 days from our Surat mill Other bases The same artwork prints on any of our 17 bases - ask for a quote Printing High-definition digital print, wash-fast Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Full fabric requirement chart This design is printed on Poly Spandex here, and the same artwork prints to order on any of our 17 base cloths. Quantities are at 44 inch width. Plain figures for a standard size, without a directional-cut allowance - add roughly 0.5 m per garment if every piece must be laid the same way. Estimates: confirm against your own pattern before ordering. Fabric needed for 37 garment types - womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 - 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 - 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 - 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 - 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 - 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 - 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 - 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 - 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 - 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 - 3.5 m Poly Crepe one-piece cut Dress 3.0 - 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 - 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 - 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 - 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 - 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 - 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 - 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 - 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 - 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 - 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 - 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 - 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 - 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 - 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4-8 Kids Kurta 1.5 m Poly Muslin age 4-8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 - 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Bulk pricing 6 metres and above - 10% off 25 metres and above - 15% off 50 metres and above - 20% off 100 metres and above - 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Maxi Dress - 3.5 - 4.0 m; Dress - 3.5 - 4.0 m; Co-ord Set - 3.5 - 4.0 m; Kurti - 2.75 m; Saree Blouse - 1.25 m; Shirt - 2.5 - 3.0 m; Men's Shirt - 2.5 - 3.0 m; Skirt - 2.25 - 2.75 m; Kids Frock - 1.75 m; Scarf - 1.0 - 2.0 m (all at 44 inch width). The full chart on this page covers 37 garment types including menswear, kids wear and home furnishing. How should I lay out and cut this print? This is an all-over, non-directional print, so pattern pieces can be nested either way up to save cloth. No special matching is needed at the seams. Which fabric quality suits this print best? This listing is Poly Spandex. If you need the same artwork on a different quality - a crisper shirting, a heavier satin, a viscose - we print it to order on any of our 17 bases. Message us using the WhatsApp button on this page. What colours does this pair with? The ground reads as White and the accent as Black. The measured shades in the artwork are approximately #E1E1E1, #3D3D3D, so you can match trims, linings and thread against those directly. Can I get this in a different colour or scale? Yes. Design 4020 can be recoloured to any Pantone shade, and the print scale can be enlarged or reduced before bulk production, at no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. Our team works with 250+ producible base fabrics in total. Only our 17 highest-volume bases are listed on the website - the full range covers viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp for a specific base. Minimum for an off-catalogue base is 100 metres, and it needs extra lead time. Is this fabric ready stock or made to order? This length is printed to order on Poly Spandex. Nothing is pre-made stock - we print each order specially, so the design can be recoloured, rescaled, or printed on any of our 17 base cloths. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers. Note that 1 unit = 1 metre. How long does delivery take? We dispatch in 4-7 days from order confirmation - that is the printing and finishing time at our Surat mill. Courier transit after that depends on your location in India. Free shipping on orders above Rs1,199 within India. Need a different colour, scale or a base not listed? Our team works with 250+ base fabrics. Message us on WhatsApp or email info@clothwala.com - mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

White & Black Sketched Zigzag Chevron Printed Spandex Fabric - Dense all-over geometric of black hand-drawn zigzag lines stacked tightly into narrow vertical chevron columns of uneven height, small scale on a white ground, printed to order on Poly Spandex and sold by the metre. Available from 1 metre with flexible wholesale minimums, made at our Surat mill and dispatched in 4-7 days. About this print Design 4019 is dense all-over geometric of black hand-drawn zigzag lines stacked tightly into narrow vertical chevron columns of uneven height, small scale on a white ground. The scale is medium (main motif approx. 1/10 of image width). This is an all-over, non-directional print, so pattern pieces can be nested either way up to make the most of the cloth. Measured shades in the artwork run approximately #E7E7E7, #272727, so trims, linings and thread can be matched directly against those values. Part of the Clothwala 2026 digital-print range. Fabric needed per garment Quantities below are for a standard non-directional layout at 44 inch width. These allow for one-way (directional) cutting - every piece laid the same way, which is how a print like this must be cut. The full chart further down gives the plain figure without that allowance. All quantities are estimates for a standard size; confirm against your own pattern before ordering. Garment Fabric needed Recommended quality Maxi Dress 3.5 - 4.0 m Poly Georgette (70-90 GSM) Dress 3.5 - 4.0 m Poly Crepe (80-95 GSM) Co-ord Set 3.5 - 4.0 m Poly Crepe (80-95 GSM) Kurti 2.75 m Poly Crepe (80-95 GSM) Saree Blouse 1.25 m Poly Japanese Satin (90-110 GSM) Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Men's Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Skirt 2.25 - 2.75 m Viscose Crepe (110-140 GSM) Kids Frock 1.75 m Cotton Cambric (80-110 GSM) Scarf 1.0 - 2.0 m Poly Chiffon (60-80 GSM) Specifications Design code 4019 Print Sketched Zigzag Chevron - Dense all-over geometric of black hand-drawn zigzag lines stacked tightly into narrow vertical chevron columns of uneven height, small scale on a white ground Ground colour White Accent colour Black Approx. shades #E7E7E7, #272727 Print scale Medium (main motif approx. 1/10 of image width) Repeat All-over / non-directional Suitable garments Shirt, Dress, Co-ord Set, Skirt, Blouse, Trousers, Men's Shirt Fabric Poly Spandex Composition Polyester Stretch Stretchable - 7% Lycra (spandex) GSM 200 gsm (this fabric) Width 54 inch Minimum order From 1 metre; flexible wholesale minimums Production Made to order - customisable Dispatch 4-7 days from our Surat mill Other bases The same artwork prints on any of our 17 bases - ask for a quote Printing High-definition digital print, wash-fast Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Full fabric requirement chart This design is printed on Poly Spandex here, and the same artwork prints to order on any of our 17 base cloths. Quantities are at 44 inch width. Plain figures for a standard size, without a directional-cut allowance - add roughly 0.5 m per garment if every piece must be laid the same way. Estimates: confirm against your own pattern before ordering. Fabric needed for 37 garment types - womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 - 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 - 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 - 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 - 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 - 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 - 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 - 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 - 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 - 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 - 3.5 m Poly Crepe one-piece cut Dress 3.0 - 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 - 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 - 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 - 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 - 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 - 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 - 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 - 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 - 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 - 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 - 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 - 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 - 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 - 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4-8 Kids Kurta 1.5 m Poly Muslin age 4-8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 - 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Bulk pricing 6 metres and above - 10% off 25 metres and above - 15% off 50 metres and above - 20% off 100 metres and above - 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Maxi Dress - 3.5 - 4.0 m; Dress - 3.5 - 4.0 m; Co-ord Set - 3.5 - 4.0 m; Kurti - 2.75 m; Saree Blouse - 1.25 m; Shirt - 2.5 - 3.0 m; Men's Shirt - 2.5 - 3.0 m; Skirt - 2.25 - 2.75 m; Kids Frock - 1.75 m; Scarf - 1.0 - 2.0 m (all at 44 inch width). The full chart on this page covers 37 garment types including menswear, kids wear and home furnishing. How should I lay out and cut this print? This is an all-over, non-directional print, so pattern pieces can be nested either way up to save cloth. No special matching is needed at the seams. Which fabric quality suits this print best? This listing is Poly Spandex. If you need the same artwork on a different quality - a crisper shirting, a heavier satin, a viscose - we print it to order on any of our 17 bases. Message us using the WhatsApp button on this page. What colours does this pair with? The ground reads as White and the accent as Black. The measured shades in the artwork are approximately #E7E7E7, #272727, so you can match trims, linings and thread against those directly. Can I get this in a different colour or scale? Yes. Design 4019 can be recoloured to any Pantone shade, and the print scale can be enlarged or reduced before bulk production, at no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. Our team works with 250+ producible base fabrics in total. Only our 17 highest-volume bases are listed on the website - the full range covers viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp for a specific base. Minimum for an off-catalogue base is 100 metres, and it needs extra lead time. Is this fabric ready stock or made to order? This length is printed to order on Poly Spandex. Nothing is pre-made stock - we print each order specially, so the design can be recoloured, rescaled, or printed on any of our 17 base cloths. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers. Note that 1 unit = 1 metre. How long does delivery take? We dispatch in 4-7 days from order confirmation - that is the printing and finishing time at our Surat mill. Courier transit after that depends on your location in India. Free shipping on orders above Rs1,199 within India. Need a different colour, scale or a base not listed? Our team works with 250+ base fabrics. Message us on WhatsApp or email info@clothwala.com - mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

Pale Stone & Black Broken Herringbone Chevron Printed Spandex Fabric - All-over geometric of closely packed black hand-drawn chevron lines arranged in offset blocks that break and shift like a staggered herringbone, on a pale stone ground, printed to order on Poly Spandex and sold by the metre. Available from 1 metre with flexible wholesale minimums, made at our Surat mill and dispatched in 4-7 days. About this print Design 4018 is all-over geometric of closely packed black hand-drawn chevron lines arranged in offset blocks that break and shift like a staggered herringbone, on a pale stone ground. The scale is large (main motif approx. 1/5 of image width). This is an all-over, non-directional print, so pattern pieces can be nested either way up to make the most of the cloth. Measured shades in the artwork run approximately #C9CBBE, #191A15, #74756D, so trims, linings and thread can be matched directly against those values. Part of the Clothwala 2026 digital-print range. Fabric needed per garment Quantities below are for a standard non-directional layout at 44 inch width. These allow for one-way (directional) cutting - every piece laid the same way, which is how a print like this must be cut. The full chart further down gives the plain figure without that allowance. All quantities are estimates for a standard size; confirm against your own pattern before ordering. Garment Fabric needed Recommended quality Maxi Dress 3.5 - 4.0 m Poly Georgette (70-90 GSM) Dress 3.5 - 4.0 m Poly Crepe (80-95 GSM) Co-ord Set 3.5 - 4.0 m Poly Crepe (80-95 GSM) Kurti 2.75 m Poly Crepe (80-95 GSM) Saree Blouse 1.25 m Poly Japanese Satin (90-110 GSM) Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Men's Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Skirt 2.25 - 2.75 m Viscose Crepe (110-140 GSM) Kids Frock 1.75 m Cotton Cambric (80-110 GSM) Scarf 1.0 - 2.0 m Poly Chiffon (60-80 GSM) Specifications Design code 4018 Print Broken Herringbone Chevron - All-over geometric of closely packed black hand-drawn chevron lines arranged in offset blocks that break and shift like a staggered herringbone, on a pale stone ground Ground colour Pale Stone Accent colour Black Approx. shades #C9CBBE, #191A15, #74756D Print scale Large (main motif approx. 1/5 of image width) Repeat All-over / non-directional Suitable garments Shirt, Dress, Co-ord Set, Skirt, Trousers, Tunic, Men's Shirt Fabric Poly Spandex Composition Polyester Stretch Stretchable - 7% Lycra (spandex) GSM 200 gsm (this fabric) Width 54 inch Minimum order From 1 metre; flexible wholesale minimums Production Made to order - customisable Dispatch 4-7 days from our Surat mill Other bases The same artwork prints on any of our 17 bases - ask for a quote Printing High-definition digital print, wash-fast Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Full fabric requirement chart This design is printed on Poly Spandex here, and the same artwork prints to order on any of our 17 base cloths. Quantities are at 44 inch width. Plain figures for a standard size, without a directional-cut allowance - add roughly 0.5 m per garment if every piece must be laid the same way. Estimates: confirm against your own pattern before ordering. Fabric needed for 37 garment types - womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 - 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 - 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 - 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 - 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 - 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 - 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 - 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 - 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 - 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 - 3.5 m Poly Crepe one-piece cut Dress 3.0 - 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 - 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 - 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 - 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 - 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 - 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 - 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 - 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 - 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 - 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 - 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 - 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 - 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 - 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4-8 Kids Kurta 1.5 m Poly Muslin age 4-8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 - 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Bulk pricing 6 metres and above - 10% off 25 metres and above - 15% off 50 metres and above - 20% off 100 metres and above - 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Maxi Dress - 3.5 - 4.0 m; Dress - 3.5 - 4.0 m; Co-ord Set - 3.5 - 4.0 m; Kurti - 2.75 m; Saree Blouse - 1.25 m; Shirt - 2.5 - 3.0 m; Men's Shirt - 2.5 - 3.0 m; Skirt - 2.25 - 2.75 m; Kids Frock - 1.75 m; Scarf - 1.0 - 2.0 m (all at 44 inch width). The full chart on this page covers 37 garment types including menswear, kids wear and home furnishing. How should I lay out and cut this print? This is an all-over, non-directional print, so pattern pieces can be nested either way up to save cloth. No special matching is needed at the seams. Which fabric quality suits this print best? This listing is Poly Spandex. If you need the same artwork on a different quality - a crisper shirting, a heavier satin, a viscose - we print it to order on any of our 17 bases. Message us using the WhatsApp button on this page. What colours does this pair with? The ground reads as Pale Stone and the accent as Black. The measured shades in the artwork are approximately #C9CBBE, #191A15, #74756D, so you can match trims, linings and thread against those directly. Can I get this in a different colour or scale? Yes. Design 4018 can be recoloured to any Pantone shade, and the print scale can be enlarged or reduced before bulk production, at no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. Our team works with 250+ producible base fabrics in total. Only our 17 highest-volume bases are listed on the website - the full range covers viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp for a specific base. Minimum for an off-catalogue base is 100 metres, and it needs extra lead time. Is this fabric ready stock or made to order? This length is printed to order on Poly Spandex. Nothing is pre-made stock - we print each order specially, so the design can be recoloured, rescaled, or printed on any of our 17 base cloths. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers. Note that 1 unit = 1 metre. How long does delivery take? We dispatch in 4-7 days from order confirmation - that is the printing and finishing time at our Surat mill. Courier transit after that depends on your location in India. Free shipping on orders above Rs1,199 within India. Need a different colour, scale or a base not listed? Our team works with 250+ base fabrics. Message us on WhatsApp or email info@clothwala.com - mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less