Lycra & Stretch Fabric - Wholesale

White & Black Undulating Wave Stripe Printed Spandex Fabric - Horizontal stripe layout of flat black undulating lines of fairly even weight with rounded, irregular crests, evenly spaced on a white ground in two colours, printed to order on Poly Spandex and sold by the metre. Available from 1 metre with flexible wholesale minimums, made at our Surat mill and dispatched in 4-7 days. About this print Design 4017 is horizontal stripe layout of flat black undulating lines of fairly even weight with rounded, irregular crests, evenly spaced on a white ground in two colours. The scale is stripe set repeats approx. every 1/8 of image width. This is an all-over, non-directional print, so pattern pieces can be nested either way up to make the most of the cloth. Measured shades in the artwork run approximately #FDFDFD, #030303, so trims, linings and thread can be matched directly against those values. Part of the Clothwala 2026 digital-print range. Fabric needed per garment Quantities below are for a standard non-directional layout at 44 inch width. These allow for one-way (directional) cutting - every piece laid the same way, which is how a print like this must be cut. The full chart further down gives the plain figure without that allowance. All quantities are estimates for a standard size; confirm against your own pattern before ordering. Garment Fabric needed Recommended quality Maxi Dress 3.5 - 4.0 m Poly Georgette (70-90 GSM) Dress 3.5 - 4.0 m Poly Crepe (80-95 GSM) Co-ord Set 3.5 - 4.0 m Poly Crepe (80-95 GSM) Kurti 2.75 m Poly Crepe (80-95 GSM) Saree Blouse 1.25 m Poly Japanese Satin (90-110 GSM) Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Men's Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Skirt 2.25 - 2.75 m Viscose Crepe (110-140 GSM) Kids Frock 1.75 m Cotton Cambric (80-110 GSM) Scarf 1.0 - 2.0 m Poly Chiffon (60-80 GSM) Specifications Design code 4017 Print Undulating Wave Stripe - Horizontal stripe layout of flat black undulating lines of fairly even weight with rounded, irregular crests, evenly spaced on a white ground in two colours Ground colour White Accent colour Black Approx. shades #FDFDFD, #030303 Print scale Stripe set repeats approx. every 1/8 of image width Repeat All-over / non-directional Suitable garments Shirt, Dress, Co-ord Set, Skirt, Palazzo, Resort Shirt, Top Fabric Poly Spandex Composition Polyester Stretch Stretchable - 7% Lycra (spandex) GSM 200 gsm (this fabric) Width 54 inch Minimum order From 1 metre; flexible wholesale minimums Production Made to order - customisable Dispatch 4-7 days from our Surat mill Other bases The same artwork prints on any of our 17 bases - ask for a quote Printing High-definition digital print, wash-fast Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Full fabric requirement chart This design is printed on Poly Spandex here, and the same artwork prints to order on any of our 17 base cloths. Quantities are at 44 inch width. Plain figures for a standard size, without a directional-cut allowance - add roughly 0.5 m per garment if every piece must be laid the same way. Estimates: confirm against your own pattern before ordering. Fabric needed for 37 garment types - womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 - 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 - 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 - 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 - 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 - 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 - 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 - 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 - 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 - 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 - 3.5 m Poly Crepe one-piece cut Dress 3.0 - 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 - 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 - 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 - 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 - 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 - 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 - 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 - 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 - 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 - 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 - 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 - 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 - 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 - 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4-8 Kids Kurta 1.5 m Poly Muslin age 4-8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 - 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Bulk pricing 6 metres and above - 10% off 25 metres and above - 15% off 50 metres and above - 20% off 100 metres and above - 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Maxi Dress - 3.5 - 4.0 m; Dress - 3.5 - 4.0 m; Co-ord Set - 3.5 - 4.0 m; Kurti - 2.75 m; Saree Blouse - 1.25 m; Shirt - 2.5 - 3.0 m; Men's Shirt - 2.5 - 3.0 m; Skirt - 2.25 - 2.75 m; Kids Frock - 1.75 m; Scarf - 1.0 - 2.0 m (all at 44 inch width). The full chart on this page covers 37 garment types including menswear, kids wear and home furnishing. How should I lay out and cut this print? This is an all-over, non-directional print, so pattern pieces can be nested either way up to save cloth. No special matching is needed at the seams. Which fabric quality suits this print best? This listing is Poly Spandex. If you need the same artwork on a different quality - a crisper shirting, a heavier satin, a viscose - we print it to order on any of our 17 bases. Message us using the WhatsApp button on this page. What colours does this pair with? The ground reads as White and the accent as Black. The measured shades in the artwork are approximately #FDFDFD, #030303, so you can match trims, linings and thread against those directly. Can I get this in a different colour or scale? Yes. Design 4017 can be recoloured to any Pantone shade, and the print scale can be enlarged or reduced before bulk production, at no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. Our team works with 250+ producible base fabrics in total. Only our 17 highest-volume bases are listed on the website - the full range covers viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp for a specific base. Minimum for an off-catalogue base is 100 metres, and it needs extra lead time. Is this fabric ready stock or made to order? This length is printed to order on Poly Spandex. Nothing is pre-made stock - we print each order specially, so the design can be recoloured, rescaled, or printed on any of our 17 base cloths. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers. Note that 1 unit = 1 metre. How long does delivery take? We dispatch in 4-7 days from order confirmation - that is the printing and finishing time at our Surat mill. Courier transit after that depends on your location in India. Free shipping on orders above Rs1,199 within India. Need a different colour, scale or a base not listed? Our team works with 250+ base fabrics. Message us on WhatsApp or email info@clothwala.com - mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

White & Black Hand-Drawn Wavy Lines Printed Spandex Fabric - Horizontal wavy stripe of flat black hand-drawn lines with uneven thickness and irregular peaks, closely spaced on a white ground in a two-colour layout, printed to order on Poly Spandex and sold by the metre. Available from 1 metre with flexible wholesale minimums, made at our Surat mill and dispatched in 4-7 days. About this print Design 4016 is horizontal wavy stripe of flat black hand-drawn lines with uneven thickness and irregular peaks, closely spaced on a white ground in a two-colour layout. The scale is stripe set repeats approx. every 1/8 of image width. This is an all-over, non-directional print, so pattern pieces can be nested either way up to make the most of the cloth. Measured shades in the artwork run approximately #FDFDFD, #050505, so trims, linings and thread can be matched directly against those values. Part of the Clothwala 2026 digital-print range. Fabric needed per garment Quantities below are for a standard non-directional layout at 44 inch width. These allow for one-way (directional) cutting - every piece laid the same way, which is how a print like this must be cut. The full chart further down gives the plain figure without that allowance. All quantities are estimates for a standard size; confirm against your own pattern before ordering. Garment Fabric needed Recommended quality Maxi Dress 3.5 - 4.0 m Poly Georgette (70-90 GSM) Dress 3.5 - 4.0 m Poly Crepe (80-95 GSM) Co-ord Set 3.5 - 4.0 m Poly Crepe (80-95 GSM) Kurti 2.75 m Poly Crepe (80-95 GSM) Saree Blouse 1.25 m Poly Japanese Satin (90-110 GSM) Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Men's Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Skirt 2.25 - 2.75 m Viscose Crepe (110-140 GSM) Kids Frock 1.75 m Cotton Cambric (80-110 GSM) Scarf 1.0 - 2.0 m Poly Chiffon (60-80 GSM) Specifications Design code 4016 Print Hand-Drawn Wavy Lines - Horizontal wavy stripe of flat black hand-drawn lines with uneven thickness and irregular peaks, closely spaced on a white ground in a two-colour layout Ground colour White Accent colour Black Approx. shades #FDFDFD, #050505 Print scale Stripe set repeats approx. every 1/8 of image width Repeat All-over / non-directional Suitable garments Shirt, Dress, Co-ord Set, Skirt, Palazzo, Blouse, Kids' Dress Fabric Poly Spandex Composition Polyester Stretch Stretchable - 7% Lycra (spandex) GSM 200 gsm (this fabric) Width 54 inch Minimum order From 1 metre; flexible wholesale minimums Production Made to order - customisable Dispatch 4-7 days from our Surat mill Other bases The same artwork prints on any of our 17 bases - ask for a quote Printing High-definition digital print, wash-fast Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Full fabric requirement chart This design is printed on Poly Spandex here, and the same artwork prints to order on any of our 17 base cloths. Quantities are at 44 inch width. Plain figures for a standard size, without a directional-cut allowance - add roughly 0.5 m per garment if every piece must be laid the same way. Estimates: confirm against your own pattern before ordering. Fabric needed for 37 garment types - womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 - 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 - 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 - 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 - 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 - 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 - 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 - 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 - 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 - 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 - 3.5 m Poly Crepe one-piece cut Dress 3.0 - 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 - 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 - 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 - 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 - 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 - 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 - 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 - 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 - 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 - 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 - 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 - 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 - 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 - 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4-8 Kids Kurta 1.5 m Poly Muslin age 4-8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 - 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Bulk pricing 6 metres and above - 10% off 25 metres and above - 15% off 50 metres and above - 20% off 100 metres and above - 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Maxi Dress - 3.5 - 4.0 m; Dress - 3.5 - 4.0 m; Co-ord Set - 3.5 - 4.0 m; Kurti - 2.75 m; Saree Blouse - 1.25 m; Shirt - 2.5 - 3.0 m; Men's Shirt - 2.5 - 3.0 m; Skirt - 2.25 - 2.75 m; Kids Frock - 1.75 m; Scarf - 1.0 - 2.0 m (all at 44 inch width). The full chart on this page covers 37 garment types including menswear, kids wear and home furnishing. How should I lay out and cut this print? This is an all-over, non-directional print, so pattern pieces can be nested either way up to save cloth. No special matching is needed at the seams. Which fabric quality suits this print best? This listing is Poly Spandex. If you need the same artwork on a different quality - a crisper shirting, a heavier satin, a viscose - we print it to order on any of our 17 bases. Message us using the WhatsApp button on this page. What colours does this pair with? The ground reads as White and the accent as Black. The measured shades in the artwork are approximately #FDFDFD, #050505, so you can match trims, linings and thread against those directly. Can I get this in a different colour or scale? Yes. Design 4016 can be recoloured to any Pantone shade, and the print scale can be enlarged or reduced before bulk production, at no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. Our team works with 250+ producible base fabrics in total. Only our 17 highest-volume bases are listed on the website - the full range covers viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp for a specific base. Minimum for an off-catalogue base is 100 metres, and it needs extra lead time. Is this fabric ready stock or made to order? This length is printed to order on Poly Spandex. Nothing is pre-made stock - we print each order specially, so the design can be recoloured, rescaled, or printed on any of our 17 base cloths. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers. Note that 1 unit = 1 metre. How long does delivery take? We dispatch in 4-7 days from order confirmation - that is the printing and finishing time at our Surat mill. Courier transit after that depends on your location in India. Free shipping on orders above Rs1,199 within India. Need a different colour, scale or a base not listed? Our team works with 250+ base fabrics. Message us on WhatsApp or email info@clothwala.com - mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

White & Black Jagged Brush Bands Printed Spandex Fabric - Large-scale print of heavy black brush bursts with jagged, spiked edges stacked into vertical bands, separated by white columns with light scratches and spatter, printed to order on Poly Spandex and sold by the metre. Available from 1 metre with flexible wholesale minimums, made at our Surat mill and dispatched in 4-7 days. About this print Design 4015 is large-scale print of heavy black brush bursts with jagged, spiked edges stacked into vertical bands, separated by white columns with light scratches and spatter. The scale is large (main motif approx. 1/3 of image width). This is an all-over, non-directional print, so pattern pieces can be nested either way up to make the most of the cloth. Measured shades in the artwork run approximately #E5E5E5, #111111, #A3A3A3, so trims, linings and thread can be matched directly against those values. Part of the Clothwala 2026 digital-print range. Fabric needed per garment Quantities below are for a standard non-directional layout at 44 inch width. These allow for one-way (directional) cutting - every piece laid the same way, which is how a print like this must be cut. The full chart further down gives the plain figure without that allowance. All quantities are estimates for a standard size; confirm against your own pattern before ordering. Garment Fabric needed Recommended quality Maxi Dress 3.5 - 4.0 m Poly Georgette (70-90 GSM) Dress 3.5 - 4.0 m Poly Crepe (80-95 GSM) Co-ord Set 3.5 - 4.0 m Poly Crepe (80-95 GSM) Kurti 2.75 m Poly Crepe (80-95 GSM) Saree Blouse 1.25 m Poly Japanese Satin (90-110 GSM) Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Men's Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Skirt 2.25 - 2.75 m Viscose Crepe (110-140 GSM) Kids Frock 1.75 m Cotton Cambric (80-110 GSM) Scarf 1.0 - 2.0 m Poly Chiffon (60-80 GSM) Specifications Design code 4015 Print Jagged Brush Bands - Large-scale print of heavy black brush bursts with jagged, spiked edges stacked into vertical bands, separated by white columns with light scratches and spatter Ground colour White Accent colour Black Approx. shades #E5E5E5, #111111, #A3A3A3 Print scale Large (main motif approx. 1/3 of image width) Repeat All-over / non-directional Suitable garments Dress, Shirt, Kaftan, Co-ord Set, Maxi Dress, Skirt, Men's Shirt Fabric Poly Spandex Composition Polyester Stretch Stretchable - 7% Lycra (spandex) GSM 200 gsm (this fabric) Width 54 inch Minimum order From 1 metre; flexible wholesale minimums Production Made to order - customisable Dispatch 4-7 days from our Surat mill Other bases The same artwork prints on any of our 17 bases - ask for a quote Printing High-definition digital print, wash-fast Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Full fabric requirement chart This design is printed on Poly Spandex here, and the same artwork prints to order on any of our 17 base cloths. Quantities are at 44 inch width. Plain figures for a standard size, without a directional-cut allowance - add roughly 0.5 m per garment if every piece must be laid the same way. Estimates: confirm against your own pattern before ordering. Fabric needed for 37 garment types - womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 - 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 - 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 - 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 - 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 - 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 - 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 - 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 - 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 - 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 - 3.5 m Poly Crepe one-piece cut Dress 3.0 - 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 - 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 - 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 - 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 - 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 - 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 - 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 - 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 - 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 - 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 - 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 - 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 - 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 - 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4-8 Kids Kurta 1.5 m Poly Muslin age 4-8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 - 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Bulk pricing 6 metres and above - 10% off 25 metres and above - 15% off 50 metres and above - 20% off 100 metres and above - 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Maxi Dress - 3.5 - 4.0 m; Dress - 3.5 - 4.0 m; Co-ord Set - 3.5 - 4.0 m; Kurti - 2.75 m; Saree Blouse - 1.25 m; Shirt - 2.5 - 3.0 m; Men's Shirt - 2.5 - 3.0 m; Skirt - 2.25 - 2.75 m; Kids Frock - 1.75 m; Scarf - 1.0 - 2.0 m (all at 44 inch width). The full chart on this page covers 37 garment types including menswear, kids wear and home furnishing. How should I lay out and cut this print? This is an all-over, non-directional print, so pattern pieces can be nested either way up to save cloth. No special matching is needed at the seams. Which fabric quality suits this print best? This listing is Poly Spandex. If you need the same artwork on a different quality - a crisper shirting, a heavier satin, a viscose - we print it to order on any of our 17 bases. Message us using the WhatsApp button on this page. What colours does this pair with? The ground reads as White and the accent as Black. The measured shades in the artwork are approximately #E5E5E5, #111111, #A3A3A3, so you can match trims, linings and thread against those directly. Can I get this in a different colour or scale? Yes. Design 4015 can be recoloured to any Pantone shade, and the print scale can be enlarged or reduced before bulk production, at no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. Our team works with 250+ producible base fabrics in total. Only our 17 highest-volume bases are listed on the website - the full range covers viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp for a specific base. Minimum for an off-catalogue base is 100 metres, and it needs extra lead time. Is this fabric ready stock or made to order? This length is printed to order on Poly Spandex. Nothing is pre-made stock - we print each order specially, so the design can be recoloured, rescaled, or printed on any of our 17 base cloths. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers. Note that 1 unit = 1 metre. How long does delivery take? We dispatch in 4-7 days from order confirmation - that is the printing and finishing time at our Surat mill. Courier transit after that depends on your location in India. Free shipping on orders above Rs1,199 within India. Need a different colour, scale or a base not listed? Our team works with 250+ base fabrics. Message us on WhatsApp or email info@clothwala.com - mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

Cream & Black Ink Drip Splatter Printed Spandex Fabric - Spaced all-over repeat of black ink splatters with long fine drip lines and small droplets flung across a pale cream ground, medium-to-large scale with open ground, printed to order on Poly Spandex and sold by the metre. Available from 1 metre with flexible wholesale minimums, made at our Surat mill and dispatched in 4-7 days. About this print Design 4014 is spaced all-over repeat of black ink splatters with long fine drip lines and small droplets flung across a pale cream ground, medium-to-large scale with open ground. The scale is large (main motif approx. 1/3 of image width). This is an all-over, non-directional print, so pattern pieces can be nested either way up to make the most of the cloth. Measured shades in the artwork run approximately #F5F8E5, #0D0D0D, #959690, so trims, linings and thread can be matched directly against those values. Part of the Clothwala 2026 digital-print range. Fabric needed per garment Quantities below are for a standard non-directional layout at 44 inch width. These allow for one-way (directional) cutting - every piece laid the same way, which is how a print like this must be cut. The full chart further down gives the plain figure without that allowance. All quantities are estimates for a standard size; confirm against your own pattern before ordering. Garment Fabric needed Recommended quality Maxi Dress 3.5 - 4.0 m Poly Georgette (70-90 GSM) Dress 3.5 - 4.0 m Poly Crepe (80-95 GSM) Co-ord Set 3.5 - 4.0 m Poly Crepe (80-95 GSM) Kurti 2.75 m Poly Crepe (80-95 GSM) Saree Blouse 1.25 m Poly Japanese Satin (90-110 GSM) Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Men's Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Skirt 2.25 - 2.75 m Viscose Crepe (110-140 GSM) Kids Frock 1.75 m Cotton Cambric (80-110 GSM) Scarf 1.0 - 2.0 m Poly Chiffon (60-80 GSM) Specifications Design code 4014 Print Ink Drip Splatter - Spaced all-over repeat of black ink splatters with long fine drip lines and small droplets flung across a pale cream ground, medium-to-large scale with open ground Ground colour Cream Accent colour Black Approx. shades #F5F8E5, #0D0D0D, #959690 Print scale Large (main motif approx. 1/3 of image width) Repeat All-over / non-directional Suitable garments Dress, Shirt, Blouse, Kaftan, Scarf, Co-ord Set, Men's Shirt Fabric Poly Spandex Composition Polyester Stretch Stretchable - 7% Lycra (spandex) GSM 200 gsm (this fabric) Width 54 inch Minimum order From 1 metre; flexible wholesale minimums Production Made to order - customisable Dispatch 4-7 days from our Surat mill Other bases The same artwork prints on any of our 17 bases - ask for a quote Printing High-definition digital print, wash-fast Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Full fabric requirement chart This design is printed on Poly Spandex here, and the same artwork prints to order on any of our 17 base cloths. Quantities are at 44 inch width. Plain figures for a standard size, without a directional-cut allowance - add roughly 0.5 m per garment if every piece must be laid the same way. Estimates: confirm against your own pattern before ordering. Fabric needed for 37 garment types - womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 - 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 - 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 - 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 - 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 - 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 - 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 - 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 - 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 - 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 - 3.5 m Poly Crepe one-piece cut Dress 3.0 - 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 - 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 - 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 - 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 - 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 - 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 - 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 - 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 - 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 - 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 - 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 - 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 - 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 - 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4-8 Kids Kurta 1.5 m Poly Muslin age 4-8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 - 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Bulk pricing 6 metres and above - 10% off 25 metres and above - 15% off 50 metres and above - 20% off 100 metres and above - 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Maxi Dress - 3.5 - 4.0 m; Dress - 3.5 - 4.0 m; Co-ord Set - 3.5 - 4.0 m; Kurti - 2.75 m; Saree Blouse - 1.25 m; Shirt - 2.5 - 3.0 m; Men's Shirt - 2.5 - 3.0 m; Skirt - 2.25 - 2.75 m; Kids Frock - 1.75 m; Scarf - 1.0 - 2.0 m (all at 44 inch width). The full chart on this page covers 37 garment types including menswear, kids wear and home furnishing. How should I lay out and cut this print? This is an all-over, non-directional print, so pattern pieces can be nested either way up to save cloth. No special matching is needed at the seams. Which fabric quality suits this print best? This listing is Poly Spandex. If you need the same artwork on a different quality - a crisper shirting, a heavier satin, a viscose - we print it to order on any of our 17 bases. Message us using the WhatsApp button on this page. What colours does this pair with? The ground reads as Cream and the accent as Black. The measured shades in the artwork are approximately #F5F8E5, #0D0D0D, #959690, so you can match trims, linings and thread against those directly. Can I get this in a different colour or scale? Yes. Design 4014 can be recoloured to any Pantone shade, and the print scale can be enlarged or reduced before bulk production, at no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. Our team works with 250+ producible base fabrics in total. Only our 17 highest-volume bases are listed on the website - the full range covers viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp for a specific base. Minimum for an off-catalogue base is 100 metres, and it needs extra lead time. Is this fabric ready stock or made to order? This length is printed to order on Poly Spandex. Nothing is pre-made stock - we print each order specially, so the design can be recoloured, rescaled, or printed on any of our 17 base cloths. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers. Note that 1 unit = 1 metre. How long does delivery take? We dispatch in 4-7 days from order confirmation - that is the printing and finishing time at our Surat mill. Courier transit after that depends on your location in India. Free shipping on orders above Rs1,199 within India. Need a different colour, scale or a base not listed? Our team works with 250+ base fabrics. Message us on WhatsApp or email info@clothwala.com - mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

Light Grey & Black Crossing Slash Hatch Printed Spandex Fabric - Dense all-over texture of black and white slash strokes crossing on opposing diagonals with patches of fine hatching, on a light grey ground at medium scale, printed to order on Poly Spandex and sold by the metre. Available from 1 metre with flexible wholesale minimums, made at our Surat mill and dispatched in 4-7 days. About this print Design 4013 is dense all-over texture of black and white slash strokes crossing on opposing diagonals with patches of fine hatching, on a light grey ground at medium scale. The scale is large (main motif approx. 1/4 of image width). This is an all-over, non-directional print, so pattern pieces can be nested either way up to make the most of the cloth. Measured shades in the artwork run approximately #D7D7D7, #1F1F1F, #ECECEC, so trims, linings and thread can be matched directly against those values. Part of the Clothwala 2026 digital-print range. Fabric needed per garment Quantities below are for a standard non-directional layout at 44 inch width. These allow for one-way (directional) cutting - every piece laid the same way, which is how a print like this must be cut. The full chart further down gives the plain figure without that allowance. All quantities are estimates for a standard size; confirm against your own pattern before ordering. Garment Fabric needed Recommended quality Maxi Dress 3.5 - 4.0 m Poly Georgette (70-90 GSM) Dress 3.5 - 4.0 m Poly Crepe (80-95 GSM) Co-ord Set 3.5 - 4.0 m Poly Crepe (80-95 GSM) Kurti 2.75 m Poly Crepe (80-95 GSM) Saree Blouse 1.25 m Poly Japanese Satin (90-110 GSM) Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Men's Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Skirt 2.25 - 2.75 m Viscose Crepe (110-140 GSM) Kids Frock 1.75 m Cotton Cambric (80-110 GSM) Scarf 1.0 - 2.0 m Poly Chiffon (60-80 GSM) Specifications Design code 4013 Print Crossing Slash Hatch - Dense all-over texture of black and white slash strokes crossing on opposing diagonals with patches of fine hatching, on a light grey ground at medium scale Ground colour Light Grey Accent colour Black Approx. shades #D7D7D7, #1F1F1F, #ECECEC Print scale Large (main motif approx. 1/4 of image width) Repeat All-over / non-directional Suitable garments Shirt, Dress, Co-ord Set, Skirt, Trousers, Men's Shirt Fabric Poly Spandex Composition Polyester Stretch Stretchable - 7% Lycra (spandex) GSM 200 gsm (this fabric) Width 54 inch Minimum order From 1 metre; flexible wholesale minimums Production Made to order - customisable Dispatch 4-7 days from our Surat mill Other bases The same artwork prints on any of our 17 bases - ask for a quote Printing High-definition digital print, wash-fast Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Full fabric requirement chart This design is printed on Poly Spandex here, and the same artwork prints to order on any of our 17 base cloths. Quantities are at 44 inch width. Plain figures for a standard size, without a directional-cut allowance - add roughly 0.5 m per garment if every piece must be laid the same way. Estimates: confirm against your own pattern before ordering. Fabric needed for 37 garment types - womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 - 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 - 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 - 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 - 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 - 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 - 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 - 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 - 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 - 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 - 3.5 m Poly Crepe one-piece cut Dress 3.0 - 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 - 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 - 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 - 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 - 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 - 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 - 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 - 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 - 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 - 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 - 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 - 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 - 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 - 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4-8 Kids Kurta 1.5 m Poly Muslin age 4-8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 - 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Bulk pricing 6 metres and above - 10% off 25 metres and above - 15% off 50 metres and above - 20% off 100 metres and above - 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Maxi Dress - 3.5 - 4.0 m; Dress - 3.5 - 4.0 m; Co-ord Set - 3.5 - 4.0 m; Kurti - 2.75 m; Saree Blouse - 1.25 m; Shirt - 2.5 - 3.0 m; Men's Shirt - 2.5 - 3.0 m; Skirt - 2.25 - 2.75 m; Kids Frock - 1.75 m; Scarf - 1.0 - 2.0 m (all at 44 inch width). The full chart on this page covers 37 garment types including menswear, kids wear and home furnishing. How should I lay out and cut this print? This is an all-over, non-directional print, so pattern pieces can be nested either way up to save cloth. No special matching is needed at the seams. Which fabric quality suits this print best? This listing is Poly Spandex. If you need the same artwork on a different quality - a crisper shirting, a heavier satin, a viscose - we print it to order on any of our 17 bases. Message us using the WhatsApp button on this page. What colours does this pair with? The ground reads as Light Grey and the accent as Black. The measured shades in the artwork are approximately #D7D7D7, #1F1F1F, #ECECEC, so you can match trims, linings and thread against those directly. Can I get this in a different colour or scale? Yes. Design 4013 can be recoloured to any Pantone shade, and the print scale can be enlarged or reduced before bulk production, at no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. Our team works with 250+ producible base fabrics in total. Only our 17 highest-volume bases are listed on the website - the full range covers viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp for a specific base. Minimum for an off-catalogue base is 100 metres, and it needs extra lead time. Is this fabric ready stock or made to order? This length is printed to order on Poly Spandex. Nothing is pre-made stock - we print each order specially, so the design can be recoloured, rescaled, or printed on any of our 17 base cloths. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers. Note that 1 unit = 1 metre. How long does delivery take? We dispatch in 4-7 days from order confirmation - that is the printing and finishing time at our Surat mill. Courier transit after that depends on your location in India. Free shipping on orders above Rs1,199 within India. Need a different colour, scale or a base not listed? Our team works with 250+ base fabrics. Message us on WhatsApp or email info@clothwala.com - mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

Light Grey & Black Scraped Paint Columns Printed Spandex Fabric - Large-scale all-over print of broad black scraped paint columns with streaked edges, set against pale grey textured columns crossed by thin slanted black lines and small grid marks, printed to order on Poly Spandex and sold by the metre. Available from 1 metre with flexible wholesale minimums, made at our Surat mill and dispatched in 4-7 days. About this print Design 4012 is large-scale all-over print of broad black scraped paint columns with streaked edges, set against pale grey textured columns crossed by thin slanted black lines and small grid marks. The scale is large (main motif approx. 1/3 of image width). This is an all-over, non-directional print, so pattern pieces can be nested either way up to make the most of the cloth. Measured shades in the artwork run approximately #DBDBDB, #0D0D0D, #8C8C8C, #454545, so trims, linings and thread can be matched directly against those values. Part of the Clothwala 2026 digital-print range. Fabric needed per garment Quantities below are for a standard non-directional layout at 44 inch width. These allow for one-way (directional) cutting - every piece laid the same way, which is how a print like this must be cut. The full chart further down gives the plain figure without that allowance. All quantities are estimates for a standard size; confirm against your own pattern before ordering. Garment Fabric needed Recommended quality Maxi Dress 3.5 - 4.0 m Poly Georgette (70-90 GSM) Dress 3.5 - 4.0 m Poly Crepe (80-95 GSM) Co-ord Set 3.5 - 4.0 m Poly Crepe (80-95 GSM) Kurti 2.75 m Poly Crepe (80-95 GSM) Saree Blouse 1.25 m Poly Japanese Satin (90-110 GSM) Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Men's Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Skirt 2.25 - 2.75 m Viscose Crepe (110-140 GSM) Kids Frock 1.75 m Cotton Cambric (80-110 GSM) Scarf 1.0 - 2.0 m Poly Chiffon (60-80 GSM) Specifications Design code 4012 Print Scraped Paint Columns - Large-scale all-over print of broad black scraped paint columns with streaked edges, set against pale grey textured columns crossed by thin slanted black lines and small grid marks Ground colour Light Grey Accent colour Black Approx. shades #DBDBDB, #0D0D0D, #8C8C8C, #454545 Print scale Large (main motif approx. 1/3 of image width) Repeat All-over / non-directional Suitable garments Shirt, Dress, Co-ord Set, Kaftan, Skirt, Men's Shirt Fabric Poly Spandex Composition Polyester Stretch Stretchable - 7% Lycra (spandex) GSM 200 gsm (this fabric) Width 54 inch Minimum order From 1 metre; flexible wholesale minimums Production Made to order - customisable Dispatch 4-7 days from our Surat mill Other bases The same artwork prints on any of our 17 bases - ask for a quote Printing High-definition digital print, wash-fast Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Full fabric requirement chart This design is printed on Poly Spandex here, and the same artwork prints to order on any of our 17 base cloths. Quantities are at 44 inch width. Plain figures for a standard size, without a directional-cut allowance - add roughly 0.5 m per garment if every piece must be laid the same way. Estimates: confirm against your own pattern before ordering. Fabric needed for 37 garment types - womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 - 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 - 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 - 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 - 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 - 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 - 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 - 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 - 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 - 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 - 3.5 m Poly Crepe one-piece cut Dress 3.0 - 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 - 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 - 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 - 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 - 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 - 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 - 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 - 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 - 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 - 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 - 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 - 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 - 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 - 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4-8 Kids Kurta 1.5 m Poly Muslin age 4-8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 - 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Bulk pricing 6 metres and above - 10% off 25 metres and above - 15% off 50 metres and above - 20% off 100 metres and above - 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Maxi Dress - 3.5 - 4.0 m; Dress - 3.5 - 4.0 m; Co-ord Set - 3.5 - 4.0 m; Kurti - 2.75 m; Saree Blouse - 1.25 m; Shirt - 2.5 - 3.0 m; Men's Shirt - 2.5 - 3.0 m; Skirt - 2.25 - 2.75 m; Kids Frock - 1.75 m; Scarf - 1.0 - 2.0 m (all at 44 inch width). The full chart on this page covers 37 garment types including menswear, kids wear and home furnishing. How should I lay out and cut this print? This is an all-over, non-directional print, so pattern pieces can be nested either way up to save cloth. No special matching is needed at the seams. Which fabric quality suits this print best? This listing is Poly Spandex. If you need the same artwork on a different quality - a crisper shirting, a heavier satin, a viscose - we print it to order on any of our 17 bases. Message us using the WhatsApp button on this page. What colours does this pair with? The ground reads as Light Grey and the accent as Black. The measured shades in the artwork are approximately #DBDBDB, #0D0D0D, #8C8C8C, #454545, so you can match trims, linings and thread against those directly. Can I get this in a different colour or scale? Yes. Design 4012 can be recoloured to any Pantone shade, and the print scale can be enlarged or reduced before bulk production, at no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. Our team works with 250+ producible base fabrics in total. Only our 17 highest-volume bases are listed on the website - the full range covers viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp for a specific base. Minimum for an off-catalogue base is 100 metres, and it needs extra lead time. Is this fabric ready stock or made to order? This length is printed to order on Poly Spandex. Nothing is pre-made stock - we print each order specially, so the design can be recoloured, rescaled, or printed on any of our 17 base cloths. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers. Note that 1 unit = 1 metre. How long does delivery take? We dispatch in 4-7 days from order confirmation - that is the printing and finishing time at our Surat mill. Courier transit after that depends on your location in India. Free shipping on orders above Rs1,199 within India. Need a different colour, scale or a base not listed? Our team works with 250+ base fabrics. Message us on WhatsApp or email info@clothwala.com - mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

Light Grey & Black Scraped Brush Bands Printed Spandex Fabric - All-over layout of wide black dry-brush vertical bands alternating with lighter grey scraped areas carrying thin slanted lines and ladder marks, large scale with heavy black coverage, printed to order on Poly Spandex and sold by the metre. Available from 1 metre with flexible wholesale minimums, made at our Surat mill and dispatched in 4-7 days. About this print Design 4011 is all-over layout of wide black dry-brush vertical bands alternating with lighter grey scraped areas carrying thin slanted lines and ladder marks, large scale with heavy black coverage. The scale is large (main motif approx. 1/3 of image width). This is an all-over, non-directional print, so pattern pieces can be nested either way up to make the most of the cloth. Measured shades in the artwork run approximately #DBDBDB, #0D0D0D, #696969, #A6A6A6, so trims, linings and thread can be matched directly against those values. Part of the Clothwala 2026 digital-print range. Fabric needed per garment Quantities below are for a standard non-directional layout at 44 inch width. These allow for one-way (directional) cutting - every piece laid the same way, which is how a print like this must be cut. The full chart further down gives the plain figure without that allowance. All quantities are estimates for a standard size; confirm against your own pattern before ordering. Garment Fabric needed Recommended quality Maxi Dress 3.5 - 4.0 m Poly Georgette (70-90 GSM) Dress 3.5 - 4.0 m Poly Crepe (80-95 GSM) Co-ord Set 3.5 - 4.0 m Poly Crepe (80-95 GSM) Kurti 2.75 m Poly Crepe (80-95 GSM) Saree Blouse 1.25 m Poly Japanese Satin (90-110 GSM) Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Men's Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Skirt 2.25 - 2.75 m Viscose Crepe (110-140 GSM) Kids Frock 1.75 m Cotton Cambric (80-110 GSM) Scarf 1.0 - 2.0 m Poly Chiffon (60-80 GSM) Specifications Design code 4011 Print Scraped Brush Bands - All-over layout of wide black dry-brush vertical bands alternating with lighter grey scraped areas carrying thin slanted lines and ladder marks, large scale with heavy black coverage Ground colour Light Grey Accent colour Black Approx. shades #DBDBDB, #0D0D0D, #696969, #A6A6A6 Print scale Large (main motif approx. 1/3 of image width) Repeat All-over / non-directional Suitable garments Shirt, Dress, Co-ord Set, Kaftan, Trousers, Men's Shirt Fabric Poly Spandex Composition Polyester Stretch Stretchable - 7% Lycra (spandex) GSM 200 gsm (this fabric) Width 54 inch Minimum order From 1 metre; flexible wholesale minimums Production Made to order - customisable Dispatch 4-7 days from our Surat mill Other bases The same artwork prints on any of our 17 bases - ask for a quote Printing High-definition digital print, wash-fast Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Full fabric requirement chart This design is printed on Poly Spandex here, and the same artwork prints to order on any of our 17 base cloths. Quantities are at 44 inch width. Plain figures for a standard size, without a directional-cut allowance - add roughly 0.5 m per garment if every piece must be laid the same way. Estimates: confirm against your own pattern before ordering. Fabric needed for 37 garment types - womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 - 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 - 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 - 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 - 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 - 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 - 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 - 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 - 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 - 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 - 3.5 m Poly Crepe one-piece cut Dress 3.0 - 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 - 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 - 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 - 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 - 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 - 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 - 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 - 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 - 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 - 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 - 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 - 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 - 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 - 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4-8 Kids Kurta 1.5 m Poly Muslin age 4-8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 - 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Bulk pricing 6 metres and above - 10% off 25 metres and above - 15% off 50 metres and above - 20% off 100 metres and above - 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Maxi Dress - 3.5 - 4.0 m; Dress - 3.5 - 4.0 m; Co-ord Set - 3.5 - 4.0 m; Kurti - 2.75 m; Saree Blouse - 1.25 m; Shirt - 2.5 - 3.0 m; Men's Shirt - 2.5 - 3.0 m; Skirt - 2.25 - 2.75 m; Kids Frock - 1.75 m; Scarf - 1.0 - 2.0 m (all at 44 inch width). The full chart on this page covers 37 garment types including menswear, kids wear and home furnishing. How should I lay out and cut this print? This is an all-over, non-directional print, so pattern pieces can be nested either way up to save cloth. No special matching is needed at the seams. Which fabric quality suits this print best? This listing is Poly Spandex. If you need the same artwork on a different quality - a crisper shirting, a heavier satin, a viscose - we print it to order on any of our 17 bases. Message us using the WhatsApp button on this page. What colours does this pair with? The ground reads as Light Grey and the accent as Black. The measured shades in the artwork are approximately #DBDBDB, #0D0D0D, #696969, #A6A6A6, so you can match trims, linings and thread against those directly. Can I get this in a different colour or scale? Yes. Design 4011 can be recoloured to any Pantone shade, and the print scale can be enlarged or reduced before bulk production, at no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. Our team works with 250+ producible base fabrics in total. Only our 17 highest-volume bases are listed on the website - the full range covers viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp for a specific base. Minimum for an off-catalogue base is 100 metres, and it needs extra lead time. Is this fabric ready stock or made to order? This length is printed to order on Poly Spandex. Nothing is pre-made stock - we print each order specially, so the design can be recoloured, rescaled, or printed on any of our 17 base cloths. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers. Note that 1 unit = 1 metre. How long does delivery take? We dispatch in 4-7 days from order confirmation - that is the printing and finishing time at our Surat mill. Courier transit after that depends on your location in India. Free shipping on orders above Rs1,199 within India. Need a different colour, scale or a base not listed? Our team works with 250+ base fabrics. Message us on WhatsApp or email info@clothwala.com - mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

White & Black Dashes & Ink Spatter Printed Spandex Fabric - All-over layout of short black horizontal brush dashes and slanted vertical strokes with scattered spatter dots of mixed size, on a white ground with faint grey creasing, printed to order on Poly Spandex and sold by the metre. Available from 1 metre with flexible wholesale minimums, made at our Surat mill and dispatched in 4-7 days. About this print Design 4010 is all-over layout of short black horizontal brush dashes and slanted vertical strokes with scattered spatter dots of mixed size, on a white ground with faint grey creasing. The scale is large (main motif approx. 1/3 of image width). This is an all-over, non-directional print, so pattern pieces can be nested either way up to make the most of the cloth. Measured shades in the artwork run approximately #F4F4F4, #212121, #C5C5C5, so trims, linings and thread can be matched directly against those values. Part of the Clothwala 2026 digital-print range. Fabric needed per garment Quantities below are for a standard non-directional layout at 44 inch width. These allow for one-way (directional) cutting - every piece laid the same way, which is how a print like this must be cut. The full chart further down gives the plain figure without that allowance. All quantities are estimates for a standard size; confirm against your own pattern before ordering. Garment Fabric needed Recommended quality Maxi Dress 3.5 - 4.0 m Poly Georgette (70-90 GSM) Dress 3.5 - 4.0 m Poly Crepe (80-95 GSM) Co-ord Set 3.5 - 4.0 m Poly Crepe (80-95 GSM) Kurti 2.75 m Poly Crepe (80-95 GSM) Saree Blouse 1.25 m Poly Japanese Satin (90-110 GSM) Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Men's Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Skirt 2.25 - 2.75 m Viscose Crepe (110-140 GSM) Kids Frock 1.75 m Cotton Cambric (80-110 GSM) Scarf 1.0 - 2.0 m Poly Chiffon (60-80 GSM) Specifications Design code 4010 Print Dashes & Ink Spatter - All-over layout of short black horizontal brush dashes and slanted vertical strokes with scattered spatter dots of mixed size, on a white ground with faint grey creasing Ground colour White Accent colour Black Approx. shades #F4F4F4, #212121, #C5C5C5 Print scale Large (main motif approx. 1/3 of image width) Repeat All-over / non-directional Suitable garments Shirt, Dress, Blouse, Co-ord Set, Tunic, Skirt, Men's Shirt Fabric Poly Spandex Composition Polyester Stretch Stretchable - 7% Lycra (spandex) GSM 200 gsm (this fabric) Width 54 inch Minimum order From 1 metre; flexible wholesale minimums Production Made to order - customisable Dispatch 4-7 days from our Surat mill Other bases The same artwork prints on any of our 17 bases - ask for a quote Printing High-definition digital print, wash-fast Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Full fabric requirement chart This design is printed on Poly Spandex here, and the same artwork prints to order on any of our 17 base cloths. Quantities are at 44 inch width. Plain figures for a standard size, without a directional-cut allowance - add roughly 0.5 m per garment if every piece must be laid the same way. Estimates: confirm against your own pattern before ordering. Fabric needed for 37 garment types - womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 - 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 - 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 - 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 - 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 - 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 - 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 - 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 - 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 - 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 - 3.5 m Poly Crepe one-piece cut Dress 3.0 - 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 - 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 - 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 - 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 - 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 - 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 - 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 - 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 - 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 - 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 - 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 - 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 - 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 - 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4-8 Kids Kurta 1.5 m Poly Muslin age 4-8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 - 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Bulk pricing 6 metres and above - 10% off 25 metres and above - 15% off 50 metres and above - 20% off 100 metres and above - 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Maxi Dress - 3.5 - 4.0 m; Dress - 3.5 - 4.0 m; Co-ord Set - 3.5 - 4.0 m; Kurti - 2.75 m; Saree Blouse - 1.25 m; Shirt - 2.5 - 3.0 m; Men's Shirt - 2.5 - 3.0 m; Skirt - 2.25 - 2.75 m; Kids Frock - 1.75 m; Scarf - 1.0 - 2.0 m (all at 44 inch width). The full chart on this page covers 37 garment types including menswear, kids wear and home furnishing. How should I lay out and cut this print? This is an all-over, non-directional print, so pattern pieces can be nested either way up to save cloth. No special matching is needed at the seams. Which fabric quality suits this print best? This listing is Poly Spandex. If you need the same artwork on a different quality - a crisper shirting, a heavier satin, a viscose - we print it to order on any of our 17 bases. Message us using the WhatsApp button on this page. What colours does this pair with? The ground reads as White and the accent as Black. The measured shades in the artwork are approximately #F4F4F4, #212121, #C5C5C5, so you can match trims, linings and thread against those directly. Can I get this in a different colour or scale? Yes. Design 4010 can be recoloured to any Pantone shade, and the print scale can be enlarged or reduced before bulk production, at no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. Our team works with 250+ producible base fabrics in total. Only our 17 highest-volume bases are listed on the website - the full range covers viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp for a specific base. Minimum for an off-catalogue base is 100 metres, and it needs extra lead time. Is this fabric ready stock or made to order? This length is printed to order on Poly Spandex. Nothing is pre-made stock - we print each order specially, so the design can be recoloured, rescaled, or printed on any of our 17 base cloths. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers. Note that 1 unit = 1 metre. How long does delivery take? We dispatch in 4-7 days from order confirmation - that is the printing and finishing time at our Surat mill. Courier transit after that depends on your location in India. Free shipping on orders above Rs1,199 within India. Need a different colour, scale or a base not listed? Our team works with 250+ base fabrics. Message us on WhatsApp or email info@clothwala.com - mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

White & Black Brush Marks & Squares Printed Spandex Fabric - All-over layout of black dry-brush marks, small solid black squares and thin straight and curved crossing lines with grey smudges, on a white ground at large scale, printed to order on Poly Spandex and sold by the metre. Available from 1 metre with flexible wholesale minimums, made at our Surat mill and dispatched in 4-7 days. About this print Design 4009 is all-over layout of black dry-brush marks, small solid black squares and thin straight and curved crossing lines with grey smudges, on a white ground at large scale. The scale is large (main motif approx. 1/3 of image width). This is an all-over, non-directional print, so pattern pieces can be nested either way up to make the most of the cloth. Measured shades in the artwork run approximately #F0F0F0, #101010, #909090, so trims, linings and thread can be matched directly against those values. Part of the Clothwala 2026 digital-print range. Fabric needed per garment Quantities below are for a standard non-directional layout at 44 inch width. These allow for one-way (directional) cutting - every piece laid the same way, which is how a print like this must be cut. The full chart further down gives the plain figure without that allowance. All quantities are estimates for a standard size; confirm against your own pattern before ordering. Garment Fabric needed Recommended quality Maxi Dress 3.5 - 4.0 m Poly Georgette (70-90 GSM) Dress 3.5 - 4.0 m Poly Crepe (80-95 GSM) Co-ord Set 3.5 - 4.0 m Poly Crepe (80-95 GSM) Kurti 2.75 m Poly Crepe (80-95 GSM) Saree Blouse 1.25 m Poly Japanese Satin (90-110 GSM) Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Men's Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Skirt 2.25 - 2.75 m Viscose Crepe (110-140 GSM) Kids Frock 1.75 m Cotton Cambric (80-110 GSM) Scarf 1.0 - 2.0 m Poly Chiffon (60-80 GSM) Specifications Design code 4009 Print Brush Marks & Squares - All-over layout of black dry-brush marks, small solid black squares and thin straight and curved crossing lines with grey smudges, on a white ground at large scale Ground colour White Accent colour Black Approx. shades #F0F0F0, #101010, #909090 Print scale Large (main motif approx. 1/3 of image width) Repeat All-over / non-directional Suitable garments Shirt, Dress, Co-ord Set, Tunic, Scarf, Skirt, Men's Shirt Fabric Poly Spandex Composition Polyester Stretch Stretchable - 7% Lycra (spandex) GSM 200 gsm (this fabric) Width 54 inch Minimum order From 1 metre; flexible wholesale minimums Production Made to order - customisable Dispatch 4-7 days from our Surat mill Other bases The same artwork prints on any of our 17 bases - ask for a quote Printing High-definition digital print, wash-fast Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Full fabric requirement chart This design is printed on Poly Spandex here, and the same artwork prints to order on any of our 17 base cloths. Quantities are at 44 inch width. Plain figures for a standard size, without a directional-cut allowance - add roughly 0.5 m per garment if every piece must be laid the same way. Estimates: confirm against your own pattern before ordering. Fabric needed for 37 garment types - womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 - 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 - 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 - 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 - 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 - 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 - 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 - 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 - 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 - 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 - 3.5 m Poly Crepe one-piece cut Dress 3.0 - 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 - 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 - 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 - 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 - 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 - 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 - 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 - 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 - 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 - 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 - 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 - 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 - 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 - 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4-8 Kids Kurta 1.5 m Poly Muslin age 4-8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 - 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Bulk pricing 6 metres and above - 10% off 25 metres and above - 15% off 50 metres and above - 20% off 100 metres and above - 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Maxi Dress - 3.5 - 4.0 m; Dress - 3.5 - 4.0 m; Co-ord Set - 3.5 - 4.0 m; Kurti - 2.75 m; Saree Blouse - 1.25 m; Shirt - 2.5 - 3.0 m; Men's Shirt - 2.5 - 3.0 m; Skirt - 2.25 - 2.75 m; Kids Frock - 1.75 m; Scarf - 1.0 - 2.0 m (all at 44 inch width). The full chart on this page covers 37 garment types including menswear, kids wear and home furnishing. How should I lay out and cut this print? This is an all-over, non-directional print, so pattern pieces can be nested either way up to save cloth. No special matching is needed at the seams. Which fabric quality suits this print best? This listing is Poly Spandex. If you need the same artwork on a different quality - a crisper shirting, a heavier satin, a viscose - we print it to order on any of our 17 bases. Message us using the WhatsApp button on this page. What colours does this pair with? The ground reads as White and the accent as Black. The measured shades in the artwork are approximately #F0F0F0, #101010, #909090, so you can match trims, linings and thread against those directly. Can I get this in a different colour or scale? Yes. Design 4009 can be recoloured to any Pantone shade, and the print scale can be enlarged or reduced before bulk production, at no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. Our team works with 250+ producible base fabrics in total. Only our 17 highest-volume bases are listed on the website - the full range covers viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp for a specific base. Minimum for an off-catalogue base is 100 metres, and it needs extra lead time. Is this fabric ready stock or made to order? This length is printed to order on Poly Spandex. Nothing is pre-made stock - we print each order specially, so the design can be recoloured, rescaled, or printed on any of our 17 base cloths. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers. Note that 1 unit = 1 metre. How long does delivery take? We dispatch in 4-7 days from order confirmation - that is the printing and finishing time at our Surat mill. Courier transit after that depends on your location in India. Free shipping on orders above Rs1,199 within India. Need a different colour, scale or a base not listed? Our team works with 250+ base fabrics. Message us on WhatsApp or email info@clothwala.com - mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

Light Grey & Black Spiked Ink Blots Printed Spandex Fabric - All-over repeat of large solid black ink blots with thin spiky lines radiating from them, on a light grey to white ground with a brushed, textured look, printed to order on Poly Spandex and sold by the metre. Available from 1 metre with flexible wholesale minimums, made at our Surat mill and dispatched in 4-7 days. About this print Design 4008 is all-over repeat of large solid black ink blots with thin spiky lines radiating from them, on a light grey to white ground with a brushed, textured look. The scale is large (main motif approx. 1/3 of image width). This is an all-over, non-directional print, so pattern pieces can be nested either way up to make the most of the cloth. Measured shades in the artwork run approximately #D3D3D3, #080808, #707070, so trims, linings and thread can be matched directly against those values. Part of the Clothwala 2026 digital-print range. Fabric needed per garment Quantities below are for a standard non-directional layout at 44 inch width. These allow for one-way (directional) cutting - every piece laid the same way, which is how a print like this must be cut. The full chart further down gives the plain figure without that allowance. All quantities are estimates for a standard size; confirm against your own pattern before ordering. Garment Fabric needed Recommended quality Maxi Dress 3.5 - 4.0 m Poly Georgette (70-90 GSM) Dress 3.5 - 4.0 m Poly Crepe (80-95 GSM) Co-ord Set 3.5 - 4.0 m Poly Crepe (80-95 GSM) Kurti 2.75 m Poly Crepe (80-95 GSM) Saree Blouse 1.25 m Poly Japanese Satin (90-110 GSM) Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Men's Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Skirt 2.25 - 2.75 m Viscose Crepe (110-140 GSM) Kids Frock 1.75 m Cotton Cambric (80-110 GSM) Scarf 1.0 - 2.0 m Poly Chiffon (60-80 GSM) Specifications Design code 4008 Print Spiked Ink Blots - All-over repeat of large solid black ink blots with thin spiky lines radiating from them, on a light grey to white ground with a brushed, textured look Ground colour Light Grey Accent colour Black Approx. shades #D3D3D3, #080808, #707070 Print scale Large (main motif approx. 1/3 of image width) Repeat All-over / non-directional Suitable garments Dress, Shirt, Kaftan, Co-ord Set, Scarf, Men's Shirt Fabric Poly Spandex Composition Polyester Stretch Stretchable - 7% Lycra (spandex) GSM 200 gsm (this fabric) Width 54 inch Minimum order From 1 metre; flexible wholesale minimums Production Made to order - customisable Dispatch 4-7 days from our Surat mill Other bases The same artwork prints on any of our 17 bases - ask for a quote Printing High-definition digital print, wash-fast Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Full fabric requirement chart This design is printed on Poly Spandex here, and the same artwork prints to order on any of our 17 base cloths. Quantities are at 44 inch width. Plain figures for a standard size, without a directional-cut allowance - add roughly 0.5 m per garment if every piece must be laid the same way. Estimates: confirm against your own pattern before ordering. Fabric needed for 37 garment types - womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 - 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 - 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 - 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 - 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 - 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 - 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 - 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 - 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 - 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 - 3.5 m Poly Crepe one-piece cut Dress 3.0 - 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 - 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 - 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 - 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 - 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 - 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 - 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 - 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 - 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 - 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 - 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 - 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 - 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 - 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4-8 Kids Kurta 1.5 m Poly Muslin age 4-8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 - 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Bulk pricing 6 metres and above - 10% off 25 metres and above - 15% off 50 metres and above - 20% off 100 metres and above - 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Maxi Dress - 3.5 - 4.0 m; Dress - 3.5 - 4.0 m; Co-ord Set - 3.5 - 4.0 m; Kurti - 2.75 m; Saree Blouse - 1.25 m; Shirt - 2.5 - 3.0 m; Men's Shirt - 2.5 - 3.0 m; Skirt - 2.25 - 2.75 m; Kids Frock - 1.75 m; Scarf - 1.0 - 2.0 m (all at 44 inch width). The full chart on this page covers 37 garment types including menswear, kids wear and home furnishing. How should I lay out and cut this print? This is an all-over, non-directional print, so pattern pieces can be nested either way up to save cloth. No special matching is needed at the seams. Which fabric quality suits this print best? This listing is Poly Spandex. If you need the same artwork on a different quality - a crisper shirting, a heavier satin, a viscose - we print it to order on any of our 17 bases. Message us using the WhatsApp button on this page. What colours does this pair with? The ground reads as Light Grey and the accent as Black. The measured shades in the artwork are approximately #D3D3D3, #080808, #707070, so you can match trims, linings and thread against those directly. Can I get this in a different colour or scale? Yes. Design 4008 can be recoloured to any Pantone shade, and the print scale can be enlarged or reduced before bulk production, at no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. Our team works with 250+ producible base fabrics in total. Only our 17 highest-volume bases are listed on the website - the full range covers viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp for a specific base. Minimum for an off-catalogue base is 100 metres, and it needs extra lead time. Is this fabric ready stock or made to order? This length is printed to order on Poly Spandex. Nothing is pre-made stock - we print each order specially, so the design can be recoloured, rescaled, or printed on any of our 17 base cloths. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers. Note that 1 unit = 1 metre. How long does delivery take? We dispatch in 4-7 days from order confirmation - that is the printing and finishing time at our Surat mill. Courier transit after that depends on your location in India. Free shipping on orders above Rs1,199 within India. Need a different colour, scale or a base not listed? Our team works with 250+ base fabrics. Message us on WhatsApp or email info@clothwala.com - mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

Black & White Broken Grid Bars Printed Spandex Fabric - Dense dark all-over layout of thick black vertical and horizontal bars and drips over white and grey shard-like fragments, forming a broken grid with black dominant, printed to order on Poly Spandex and sold by the metre. Available from 1 metre with flexible wholesale minimums, made at our Surat mill and dispatched in 4-7 days. About this print Design 4007 is dense dark all-over layout of thick black vertical and horizontal bars and drips over white and grey shard-like fragments, forming a broken grid with black dominant. The scale is large (main motif approx. 1/3 of image width). This is an all-over, non-directional print, so pattern pieces can be nested either way up to make the most of the cloth. Measured shades in the artwork run approximately #050505, #DDDDDD, #838383, so trims, linings and thread can be matched directly against those values. Part of the Clothwala 2026 digital-print range. Fabric needed per garment Quantities below are for a standard non-directional layout at 44 inch width. These allow for one-way (directional) cutting - every piece laid the same way, which is how a print like this must be cut. The full chart further down gives the plain figure without that allowance. All quantities are estimates for a standard size; confirm against your own pattern before ordering. Garment Fabric needed Recommended quality Maxi Dress 3.5 - 4.0 m Poly Georgette (70-90 GSM) Dress 3.5 - 4.0 m Poly Crepe (80-95 GSM) Co-ord Set 3.5 - 4.0 m Poly Crepe (80-95 GSM) Kurti 2.75 m Poly Crepe (80-95 GSM) Saree Blouse 1.25 m Poly Japanese Satin (90-110 GSM) Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Men's Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Skirt 2.25 - 2.75 m Viscose Crepe (110-140 GSM) Kids Frock 1.75 m Cotton Cambric (80-110 GSM) Scarf 1.0 - 2.0 m Poly Chiffon (60-80 GSM) Specifications Design code 4007 Print Broken Grid Bars - Dense dark all-over layout of thick black vertical and horizontal bars and drips over white and grey shard-like fragments, forming a broken grid with black dominant Ground colour Black Accent colour White Approx. shades #050505, #DDDDDD, #838383 Print scale Large (main motif approx. 1/3 of image width) Repeat All-over / non-directional Suitable garments Shirt, Dress, Co-ord Set, Trousers, Skirt, Men's Shirt Fabric Poly Spandex Composition Polyester Stretch Stretchable - 7% Lycra (spandex) GSM 200 gsm (this fabric) Width 54 inch Minimum order From 1 metre; flexible wholesale minimums Production Made to order - customisable Dispatch 4-7 days from our Surat mill Other bases The same artwork prints on any of our 17 bases - ask for a quote Printing High-definition digital print, wash-fast Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Full fabric requirement chart This design is printed on Poly Spandex here, and the same artwork prints to order on any of our 17 base cloths. Quantities are at 44 inch width. Plain figures for a standard size, without a directional-cut allowance - add roughly 0.5 m per garment if every piece must be laid the same way. Estimates: confirm against your own pattern before ordering. Fabric needed for 37 garment types - womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 - 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 - 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 - 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 - 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 - 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 - 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 - 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 - 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 - 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 - 3.5 m Poly Crepe one-piece cut Dress 3.0 - 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 - 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 - 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 - 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 - 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 - 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 - 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 - 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 - 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 - 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 - 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 - 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 - 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 - 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4-8 Kids Kurta 1.5 m Poly Muslin age 4-8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 - 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Bulk pricing 6 metres and above - 10% off 25 metres and above - 15% off 50 metres and above - 20% off 100 metres and above - 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Maxi Dress - 3.5 - 4.0 m; Dress - 3.5 - 4.0 m; Co-ord Set - 3.5 - 4.0 m; Kurti - 2.75 m; Saree Blouse - 1.25 m; Shirt - 2.5 - 3.0 m; Men's Shirt - 2.5 - 3.0 m; Skirt - 2.25 - 2.75 m; Kids Frock - 1.75 m; Scarf - 1.0 - 2.0 m (all at 44 inch width). The full chart on this page covers 37 garment types including menswear, kids wear and home furnishing. How should I lay out and cut this print? This is an all-over, non-directional print, so pattern pieces can be nested either way up to save cloth. No special matching is needed at the seams. Which fabric quality suits this print best? This listing is Poly Spandex. If you need the same artwork on a different quality - a crisper shirting, a heavier satin, a viscose - we print it to order on any of our 17 bases. Message us using the WhatsApp button on this page. What colours does this pair with? The ground reads as Black and the accent as White. The measured shades in the artwork are approximately #050505, #DDDDDD, #838383, so you can match trims, linings and thread against those directly. Can I get this in a different colour or scale? Yes. Design 4007 can be recoloured to any Pantone shade, and the print scale can be enlarged or reduced before bulk production, at no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. Our team works with 250+ producible base fabrics in total. Only our 17 highest-volume bases are listed on the website - the full range covers viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp for a specific base. Minimum for an off-catalogue base is 100 metres, and it needs extra lead time. Is this fabric ready stock or made to order? This length is printed to order on Poly Spandex. Nothing is pre-made stock - we print each order specially, so the design can be recoloured, rescaled, or printed on any of our 17 base cloths. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers. Note that 1 unit = 1 metre. How long does delivery take? We dispatch in 4-7 days from order confirmation - that is the printing and finishing time at our Surat mill. Courier transit after that depends on your location in India. Free shipping on orders above Rs1,199 within India. Need a different colour, scale or a base not listed? Our team works with 250+ base fabrics. Message us on WhatsApp or email info@clothwala.com - mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

Black & White Oval Patches Printed Spandex Fabric - Dark all-over print of heavy black brushwork broken by irregular white oval patches and thin white scratch lines, with the black covering most of the surface, printed to order on Poly Spandex and sold by the metre. Available from 1 metre with flexible wholesale minimums, made at our Surat mill and dispatched in 4-7 days. About this print Design 4006 is dark all-over print of heavy black brushwork broken by irregular white oval patches and thin white scratch lines, with the black covering most of the surface. The scale is medium (main motif approx. 1/10 of image width). This is an all-over, non-directional print, so pattern pieces can be nested either way up to make the most of the cloth. Measured shades in the artwork run approximately #040404, #EBEBEB, #8F8F8F, so trims, linings and thread can be matched directly against those values. Part of the Clothwala 2026 digital-print range. Fabric needed per garment Quantities below are for a standard non-directional layout at 44 inch width. These allow for one-way (directional) cutting - every piece laid the same way, which is how a print like this must be cut. The full chart further down gives the plain figure without that allowance. All quantities are estimates for a standard size; confirm against your own pattern before ordering. Garment Fabric needed Recommended quality Maxi Dress 3.5 - 4.0 m Poly Georgette (70-90 GSM) Dress 3.5 - 4.0 m Poly Crepe (80-95 GSM) Co-ord Set 3.5 - 4.0 m Poly Crepe (80-95 GSM) Kurti 2.75 m Poly Crepe (80-95 GSM) Saree Blouse 1.25 m Poly Japanese Satin (90-110 GSM) Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Men's Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Skirt 2.25 - 2.75 m Viscose Crepe (110-140 GSM) Kids Frock 1.75 m Cotton Cambric (80-110 GSM) Scarf 1.0 - 2.0 m Poly Chiffon (60-80 GSM) Specifications Design code 4006 Print White Oval Patches - Dark all-over print of heavy black brushwork broken by irregular white oval patches and thin white scratch lines, with the black covering most of the surface Ground colour Black Accent colour White Approx. shades #040404, #EBEBEB, #8F8F8F Print scale Medium (main motif approx. 1/10 of image width) Repeat All-over / non-directional Suitable garments Dress, Shirt, Co-ord Set, Kaftan, Skirt, Men's Shirt Fabric Poly Spandex Composition Polyester Stretch Stretchable - 7% Lycra (spandex) GSM 200 gsm (this fabric) Width 54 inch Minimum order From 1 metre; flexible wholesale minimums Production Made to order - customisable Dispatch 4-7 days from our Surat mill Other bases The same artwork prints on any of our 17 bases - ask for a quote Printing High-definition digital print, wash-fast Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Full fabric requirement chart This design is printed on Poly Spandex here, and the same artwork prints to order on any of our 17 base cloths. Quantities are at 44 inch width. Plain figures for a standard size, without a directional-cut allowance - add roughly 0.5 m per garment if every piece must be laid the same way. Estimates: confirm against your own pattern before ordering. Fabric needed for 37 garment types - womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 - 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 - 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 - 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 - 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 - 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 - 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 - 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 - 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 - 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 - 3.5 m Poly Crepe one-piece cut Dress 3.0 - 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 - 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 - 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 - 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 - 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 - 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 - 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 - 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 - 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 - 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 - 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 - 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 - 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 - 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4-8 Kids Kurta 1.5 m Poly Muslin age 4-8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 - 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Bulk pricing 6 metres and above - 10% off 25 metres and above - 15% off 50 metres and above - 20% off 100 metres and above - 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Maxi Dress - 3.5 - 4.0 m; Dress - 3.5 - 4.0 m; Co-ord Set - 3.5 - 4.0 m; Kurti - 2.75 m; Saree Blouse - 1.25 m; Shirt - 2.5 - 3.0 m; Men's Shirt - 2.5 - 3.0 m; Skirt - 2.25 - 2.75 m; Kids Frock - 1.75 m; Scarf - 1.0 - 2.0 m (all at 44 inch width). The full chart on this page covers 37 garment types including menswear, kids wear and home furnishing. How should I lay out and cut this print? This is an all-over, non-directional print, so pattern pieces can be nested either way up to save cloth. No special matching is needed at the seams. Which fabric quality suits this print best? This listing is Poly Spandex. If you need the same artwork on a different quality - a crisper shirting, a heavier satin, a viscose - we print it to order on any of our 17 bases. Message us using the WhatsApp button on this page. What colours does this pair with? The ground reads as Black and the accent as White. The measured shades in the artwork are approximately #040404, #EBEBEB, #8F8F8F, so you can match trims, linings and thread against those directly. Can I get this in a different colour or scale? Yes. Design 4006 can be recoloured to any Pantone shade, and the print scale can be enlarged or reduced before bulk production, at no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. Our team works with 250+ producible base fabrics in total. Only our 17 highest-volume bases are listed on the website - the full range covers viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp for a specific base. Minimum for an off-catalogue base is 100 metres, and it needs extra lead time. Is this fabric ready stock or made to order? This length is printed to order on Poly Spandex. Nothing is pre-made stock - we print each order specially, so the design can be recoloured, rescaled, or printed on any of our 17 base cloths. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers. Note that 1 unit = 1 metre. How long does delivery take? We dispatch in 4-7 days from order confirmation - that is the printing and finishing time at our Surat mill. Courier transit after that depends on your location in India. Free shipping on orders above Rs1,199 within India. Need a different colour, scale or a base not listed? Our team works with 250+ base fabrics. Message us on WhatsApp or email info@clothwala.com - mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less