Lycra & Stretch Fabric - Wholesale

White & Black Multicolour Brush Dots Printed Spandex Fabric - Scattered all-over print of hand-painted irregular dots in mixed sizes, mostly black with yellow, orange, red and charcoal accents and clusters of fine dashes, on a white ground, printed to order on Poly Spandex and sold by the metre. Available from 1 metre with flexible wholesale minimums, made at our Surat mill and dispatched in 4-7 days. About this print Design 4041 is scattered all-over print of hand-painted irregular dots in mixed sizes, mostly black with yellow, orange, red and charcoal accents and clusters of fine dashes, on a white ground. The scale is small (main motif approx. 1/25 of image width). This is an all-over, non-directional print, so pattern pieces can be nested either way up to make the most of the cloth. Measured shades in the artwork run approximately #F9F9F9, #0C0C0C, #E68B2E, so trims, linings and thread can be matched directly against those values. One of the designs in the Clothwala 2026 polka dot collection. Fabric needed per garment Quantities below are for a standard non-directional layout at 44 inch width. These allow for one-way (directional) cutting - every piece laid the same way, which is how a print like this must be cut. The full chart further down gives the plain figure without that allowance. All quantities are estimates for a standard size; confirm against your own pattern before ordering. Garment Fabric needed Recommended quality Maxi Dress 3.5 - 4.0 m Poly Georgette (70-90 GSM) Dress 3.5 - 4.0 m Poly Crepe (80-95 GSM) Co-ord Set 3.5 - 4.0 m Poly Crepe (80-95 GSM) Kurti 2.75 m Poly Crepe (80-95 GSM) Saree Blouse 1.25 m Poly Japanese Satin (90-110 GSM) Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Men's Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Skirt 2.25 - 2.75 m Viscose Crepe (110-140 GSM) Kids Frock 1.75 m Cotton Cambric (80-110 GSM) Scarf 1.0 - 2.0 m Poly Chiffon (60-80 GSM) Specifications Design code 4041 Print Multicolour Brush Dots - Scattered all-over print of hand-painted irregular dots in mixed sizes, mostly black with yellow, orange, red and charcoal accents and clusters of fine dashes, on a white ground Ground colour White Accent colour Black Approx. shades #F9F9F9, #0C0C0C, #E68B2E Print scale Small (main motif approx. 1/25 of image width) Repeat All-over / non-directional Suitable garments Dress, Shirt, Blouse, Kids' Dress, Co-ord Set, Skirt Fabric Poly Spandex Composition Polyester Stretch Stretchable - 7% Lycra (spandex) GSM 200 gsm (this fabric) Width 54 inch Minimum order From 1 metre; flexible wholesale minimums Production Made to order - customisable Dispatch 4-7 days from our Surat mill Other bases The same artwork prints on any of our 17 bases - ask for a quote Printing High-definition digital print, wash-fast Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Full fabric requirement chart This design is printed on Poly Spandex here, and the same artwork prints to order on any of our 17 base cloths. Quantities are at 44 inch width. Plain figures for a standard size, without a directional-cut allowance - add roughly 0.5 m per garment if every piece must be laid the same way. Estimates: confirm against your own pattern before ordering. Fabric needed for 37 garment types - womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 - 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 - 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 - 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 - 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 - 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 - 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 - 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 - 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 - 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 - 3.5 m Poly Crepe one-piece cut Dress 3.0 - 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 - 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 - 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 - 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 - 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 - 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 - 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 - 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 - 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 - 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 - 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 - 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 - 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 - 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4-8 Kids Kurta 1.5 m Poly Muslin age 4-8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 - 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Bulk pricing 6 metres and above - 10% off 25 metres and above - 15% off 50 metres and above - 20% off 100 metres and above - 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Maxi Dress - 3.5 - 4.0 m; Dress - 3.5 - 4.0 m; Co-ord Set - 3.5 - 4.0 m; Kurti - 2.75 m; Saree Blouse - 1.25 m; Shirt - 2.5 - 3.0 m; Men's Shirt - 2.5 - 3.0 m; Skirt - 2.25 - 2.75 m; Kids Frock - 1.75 m; Scarf - 1.0 - 2.0 m (all at 44 inch width). The full chart on this page covers 37 garment types including menswear, kids wear and home furnishing. What size are the dots? Small (main motif approx. 1/25 of image width) dot set in columns over the ground. This is a geometric print, so it carries a strong, graphic line down the body of a garment. How should I lay out and cut this print? This is an all-over, non-directional print, so pattern pieces can be nested either way up to save cloth. No special matching is needed at the seams. Which fabric quality suits this print best? This listing is Poly Spandex. If you need the same artwork on a different quality - a crisper shirting, a heavier satin, a viscose - we print it to order on any of our 17 bases. Message us using the WhatsApp button on this page. Is polka dot still a current trend? Yes - polka dot is one of the few prints that never fully leaves the range, and it runs strongly for 2026-27 across resort, shirting and womenswear. It is a safe repeat-order print. What colours does this pair with? The ground reads as White and the accent as Black. The measured shades in the artwork are approximately #F9F9F9, #0C0C0C, #E68B2E, so you can match trims, linings and thread against those directly. Can I get this in a different colour or scale? Yes. Design 4041 can be recoloured to any Pantone shade, and the print scale can be enlarged or reduced before bulk production, at no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. Our team works with 250+ producible base fabrics in total. Only our 17 highest-volume bases are listed on the website - the full range covers viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp for a specific base. Minimum for an off-catalogue base is 100 metres, and it needs extra lead time. Is this fabric ready stock or made to order? This length is printed to order on Poly Spandex. Nothing is pre-made stock - we print each order specially, so the design can be recoloured, rescaled, or printed on any of our 17 base cloths. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers. Note that 1 unit = 1 metre. How long does delivery take? We dispatch in 4-7 days from order confirmation - that is the printing and finishing time at our Surat mill. Courier transit after that depends on your location in India. Free shipping on orders above Rs1,199 within India. Need a different colour, scale or a base not listed? Our team works with 250+ base fabrics. Message us on WhatsApp or email info@clothwala.com - mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

White & Black Slanted Ink Blobs Printed Spandex Fabric - All-over two-colour print of solid black elongated blobs mixed with small round spots, all leaning on the same diagonal, densely packed on a white ground, printed to order on Poly Spandex and sold by the metre. Available from 1 metre with flexible wholesale minimums, made at our Surat mill and dispatched in 4-7 days. About this print Design 4040 is all-over two-colour print of solid black elongated blobs mixed with small round spots, all leaning on the same diagonal, densely packed on a white ground. The scale is small (main motif approx. 1/20 of image width). This is an all-over, non-directional print, so pattern pieces can be nested either way up to make the most of the cloth. Measured shades in the artwork run approximately #FCFCFC, #060606, so trims, linings and thread can be matched directly against those values. Part of the Clothwala 2026 digital-print range. Fabric needed per garment Quantities below are for a standard non-directional layout at 44 inch width. These allow for one-way (directional) cutting - every piece laid the same way, which is how a print like this must be cut. The full chart further down gives the plain figure without that allowance. All quantities are estimates for a standard size; confirm against your own pattern before ordering. Garment Fabric needed Recommended quality Maxi Dress 3.5 - 4.0 m Poly Georgette (70-90 GSM) Dress 3.5 - 4.0 m Poly Crepe (80-95 GSM) Co-ord Set 3.5 - 4.0 m Poly Crepe (80-95 GSM) Kurti 2.75 m Poly Crepe (80-95 GSM) Saree Blouse 1.25 m Poly Japanese Satin (90-110 GSM) Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Men's Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Skirt 2.25 - 2.75 m Viscose Crepe (110-140 GSM) Kids Frock 1.75 m Cotton Cambric (80-110 GSM) Scarf 1.0 - 2.0 m Poly Chiffon (60-80 GSM) Specifications Design code 4040 Print Slanted Ink Blobs - All-over two-colour print of solid black elongated blobs mixed with small round spots, all leaning on the same diagonal, densely packed on a white ground Ground colour White Accent colour Black Approx. shades #FCFCFC, #060606 Print scale Small (main motif approx. 1/20 of image width) Repeat All-over / non-directional Suitable garments Shirt, Dress, Blouse, Skirt, Co-ord Set, Scarf Fabric Poly Spandex Composition Polyester Stretch Stretchable - 7% Lycra (spandex) GSM 200 gsm (this fabric) Width 54 inch Minimum order From 1 metre; flexible wholesale minimums Production Made to order - customisable Dispatch 4-7 days from our Surat mill Other bases The same artwork prints on any of our 17 bases - ask for a quote Printing High-definition digital print, wash-fast Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Full fabric requirement chart This design is printed on Poly Spandex here, and the same artwork prints to order on any of our 17 base cloths. Quantities are at 44 inch width. Plain figures for a standard size, without a directional-cut allowance - add roughly 0.5 m per garment if every piece must be laid the same way. Estimates: confirm against your own pattern before ordering. Fabric needed for 37 garment types - womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 - 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 - 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 - 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 - 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 - 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 - 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 - 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 - 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 - 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 - 3.5 m Poly Crepe one-piece cut Dress 3.0 - 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 - 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 - 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 - 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 - 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 - 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 - 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 - 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 - 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 - 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 - 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 - 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 - 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 - 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4-8 Kids Kurta 1.5 m Poly Muslin age 4-8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 - 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Bulk pricing 6 metres and above - 10% off 25 metres and above - 15% off 50 metres and above - 20% off 100 metres and above - 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Maxi Dress - 3.5 - 4.0 m; Dress - 3.5 - 4.0 m; Co-ord Set - 3.5 - 4.0 m; Kurti - 2.75 m; Saree Blouse - 1.25 m; Shirt - 2.5 - 3.0 m; Men's Shirt - 2.5 - 3.0 m; Skirt - 2.25 - 2.75 m; Kids Frock - 1.75 m; Scarf - 1.0 - 2.0 m (all at 44 inch width). The full chart on this page covers 37 garment types including menswear, kids wear and home furnishing. How should I lay out and cut this print? This is an all-over, non-directional print, so pattern pieces can be nested either way up to save cloth. No special matching is needed at the seams. Which fabric quality suits this print best? This listing is Poly Spandex. If you need the same artwork on a different quality - a crisper shirting, a heavier satin, a viscose - we print it to order on any of our 17 bases. Message us using the WhatsApp button on this page. What colours does this pair with? The ground reads as White and the accent as Black. The measured shades in the artwork are approximately #FCFCFC, #060606, so you can match trims, linings and thread against those directly. Can I get this in a different colour or scale? Yes. Design 4040 can be recoloured to any Pantone shade, and the print scale can be enlarged or reduced before bulk production, at no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. Our team works with 250+ producible base fabrics in total. Only our 17 highest-volume bases are listed on the website - the full range covers viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp for a specific base. Minimum for an off-catalogue base is 100 metres, and it needs extra lead time. Is this fabric ready stock or made to order? This length is printed to order on Poly Spandex. Nothing is pre-made stock - we print each order specially, so the design can be recoloured, rescaled, or printed on any of our 17 base cloths. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers. Note that 1 unit = 1 metre. How long does delivery take? We dispatch in 4-7 days from order confirmation - that is the printing and finishing time at our Surat mill. Courier transit after that depends on your location in India. Free shipping on orders above Rs1,199 within India. Need a different colour, scale or a base not listed? Our team works with 250+ base fabrics. Message us on WhatsApp or email info@clothwala.com - mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

Beige & Black Blobs & Mustard Patches Printed Spandex Fabric - Tossed all-over layout of large black rounded blobs, mustard yellow and orange patches and many small black and orange dots, with cream highlights, on a warm beige ground, printed to order on Poly Spandex and sold by the metre. Available from 1 metre with flexible wholesale minimums, made at our Surat mill and dispatched in 4-7 days. About this print Design 4039 is tossed all-over layout of large black rounded blobs, mustard yellow and orange patches and many small black and orange dots, with cream highlights, on a warm beige ground. The scale is medium (main motif approx. 1/8 of image width). This is an all-over, non-directional print, so pattern pieces can be nested either way up to make the most of the cloth. Measured shades in the artwork run approximately #EFE0C4, #191513, #D99C21, #F6F0E1, so trims, linings and thread can be matched directly against those values. Part of the Clothwala 2026 digital-print range. Fabric needed per garment Quantities below are for a standard non-directional layout at 44 inch width. These allow for one-way (directional) cutting - every piece laid the same way, which is how a print like this must be cut. The full chart further down gives the plain figure without that allowance. All quantities are estimates for a standard size; confirm against your own pattern before ordering. Garment Fabric needed Recommended quality Maxi Dress 3.5 - 4.0 m Poly Georgette (70-90 GSM) Dress 3.5 - 4.0 m Poly Crepe (80-95 GSM) Co-ord Set 3.5 - 4.0 m Poly Crepe (80-95 GSM) Kurti 2.75 m Poly Crepe (80-95 GSM) Saree Blouse 1.25 m Poly Japanese Satin (90-110 GSM) Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Men's Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Skirt 2.25 - 2.75 m Viscose Crepe (110-140 GSM) Kids Frock 1.75 m Cotton Cambric (80-110 GSM) Scarf 1.0 - 2.0 m Poly Chiffon (60-80 GSM) Specifications Design code 4039 Print Blobs & Mustard Patches - Tossed all-over layout of large black rounded blobs, mustard yellow and orange patches and many small black and orange dots, with cream highlights, on a warm beige ground Ground colour Beige Accent colour Black Approx. shades #EFE0C4, #191513, #D99C21, #F6F0E1 Print scale Medium (main motif approx. 1/8 of image width) Repeat All-over / non-directional Suitable garments Dress, Shirt, Co-ord Set, Skirt, Kaftan, Resort Shirt, Kids' Dress Fabric Poly Spandex Composition Polyester Stretch Stretchable - 7% Lycra (spandex) GSM 200 gsm (this fabric) Width 54 inch Minimum order From 1 metre; flexible wholesale minimums Production Made to order - customisable Dispatch 4-7 days from our Surat mill Other bases The same artwork prints on any of our 17 bases - ask for a quote Printing High-definition digital print, wash-fast Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Full fabric requirement chart This design is printed on Poly Spandex here, and the same artwork prints to order on any of our 17 base cloths. Quantities are at 44 inch width. Plain figures for a standard size, without a directional-cut allowance - add roughly 0.5 m per garment if every piece must be laid the same way. Estimates: confirm against your own pattern before ordering. Fabric needed for 37 garment types - womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 - 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 - 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 - 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 - 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 - 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 - 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 - 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 - 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 - 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 - 3.5 m Poly Crepe one-piece cut Dress 3.0 - 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 - 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 - 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 - 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 - 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 - 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 - 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 - 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 - 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 - 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 - 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 - 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 - 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 - 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4-8 Kids Kurta 1.5 m Poly Muslin age 4-8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 - 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Bulk pricing 6 metres and above - 10% off 25 metres and above - 15% off 50 metres and above - 20% off 100 metres and above - 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Maxi Dress - 3.5 - 4.0 m; Dress - 3.5 - 4.0 m; Co-ord Set - 3.5 - 4.0 m; Kurti - 2.75 m; Saree Blouse - 1.25 m; Shirt - 2.5 - 3.0 m; Men's Shirt - 2.5 - 3.0 m; Skirt - 2.25 - 2.75 m; Kids Frock - 1.75 m; Scarf - 1.0 - 2.0 m (all at 44 inch width). The full chart on this page covers 37 garment types including menswear, kids wear and home furnishing. How should I lay out and cut this print? This is an all-over, non-directional print, so pattern pieces can be nested either way up to save cloth. No special matching is needed at the seams. Which fabric quality suits this print best? This listing is Poly Spandex. If you need the same artwork on a different quality - a crisper shirting, a heavier satin, a viscose - we print it to order on any of our 17 bases. Message us using the WhatsApp button on this page. What colours does this pair with? The ground reads as Beige and the accent as Black. The measured shades in the artwork are approximately #EFE0C4, #191513, #D99C21, #F6F0E1, so you can match trims, linings and thread against those directly. Can I get this in a different colour or scale? Yes. Design 4039 can be recoloured to any Pantone shade, and the print scale can be enlarged or reduced before bulk production, at no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. Our team works with 250+ producible base fabrics in total. Only our 17 highest-volume bases are listed on the website - the full range covers viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp for a specific base. Minimum for an off-catalogue base is 100 metres, and it needs extra lead time. Is this fabric ready stock or made to order? This length is printed to order on Poly Spandex. Nothing is pre-made stock - we print each order specially, so the design can be recoloured, rescaled, or printed on any of our 17 base cloths. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers. Note that 1 unit = 1 metre. How long does delivery take? We dispatch in 4-7 days from order confirmation - that is the printing and finishing time at our Surat mill. Courier transit after that depends on your location in India. Free shipping on orders above Rs1,199 within India. Need a different colour, scale or a base not listed? Our team works with 250+ base fabrics. Message us on WhatsApp or email info@clothwala.com - mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

Cream & Black Swirl Dots & Dabs Printed Spandex Fabric - All-over scatter of black dots and short oval dashes that vary in size and follow swirling lines, mixed with larger tan brush dabs and small tan dots, on a cream ground, printed to order on Poly Spandex and sold by the metre. Available from 1 metre with flexible wholesale minimums, made at our Surat mill and dispatched in 4-7 days. About this print Design 4038 is all-over scatter of black dots and short oval dashes that vary in size and follow swirling lines, mixed with larger tan brush dabs and small tan dots, on a cream ground. The scale is small (main motif approx. 1/17 of image width). This is an all-over, non-directional print, so pattern pieces can be nested either way up to make the most of the cloth. Measured shades in the artwork run approximately #F4F3E4, #2C2D28, #B9AC8F, so trims, linings and thread can be matched directly against those values. One of the designs in the Clothwala 2026 polka dot collection. Fabric needed per garment Quantities below are for a standard non-directional layout at 44 inch width. These allow for one-way (directional) cutting - every piece laid the same way, which is how a print like this must be cut. The full chart further down gives the plain figure without that allowance. All quantities are estimates for a standard size; confirm against your own pattern before ordering. Garment Fabric needed Recommended quality Maxi Dress 3.5 - 4.0 m Poly Georgette (70-90 GSM) Dress 3.5 - 4.0 m Poly Crepe (80-95 GSM) Co-ord Set 3.5 - 4.0 m Poly Crepe (80-95 GSM) Kurti 2.75 m Poly Crepe (80-95 GSM) Saree Blouse 1.25 m Poly Japanese Satin (90-110 GSM) Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Men's Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Skirt 2.25 - 2.75 m Viscose Crepe (110-140 GSM) Kids Frock 1.75 m Cotton Cambric (80-110 GSM) Scarf 1.0 - 2.0 m Poly Chiffon (60-80 GSM) Specifications Design code 4038 Print Swirl Dots & Dabs - All-over scatter of black dots and short oval dashes that vary in size and follow swirling lines, mixed with larger tan brush dabs and small tan dots, on a cream ground Ground colour Cream Accent colour Black Approx. shades #F4F3E4, #2C2D28, #B9AC8F Print scale Small (main motif approx. 1/17 of image width) Repeat All-over / non-directional Suitable garments Dress, Blouse, Shirt, Skirt, Co-ord Set, Kaftan, Scarf Fabric Poly Spandex Composition Polyester Stretch Stretchable - 7% Lycra (spandex) GSM 200 gsm (this fabric) Width 54 inch Minimum order From 1 metre; flexible wholesale minimums Production Made to order - customisable Dispatch 4-7 days from our Surat mill Other bases The same artwork prints on any of our 17 bases - ask for a quote Printing High-definition digital print, wash-fast Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Full fabric requirement chart This design is printed on Poly Spandex here, and the same artwork prints to order on any of our 17 base cloths. Quantities are at 44 inch width. Plain figures for a standard size, without a directional-cut allowance - add roughly 0.5 m per garment if every piece must be laid the same way. Estimates: confirm against your own pattern before ordering. Fabric needed for 37 garment types - womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 - 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 - 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 - 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 - 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 - 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 - 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 - 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 - 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 - 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 - 3.5 m Poly Crepe one-piece cut Dress 3.0 - 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 - 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 - 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 - 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 - 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 - 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 - 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 - 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 - 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 - 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 - 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 - 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 - 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 - 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4-8 Kids Kurta 1.5 m Poly Muslin age 4-8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 - 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Bulk pricing 6 metres and above - 10% off 25 metres and above - 15% off 50 metres and above - 20% off 100 metres and above - 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Maxi Dress - 3.5 - 4.0 m; Dress - 3.5 - 4.0 m; Co-ord Set - 3.5 - 4.0 m; Kurti - 2.75 m; Saree Blouse - 1.25 m; Shirt - 2.5 - 3.0 m; Men's Shirt - 2.5 - 3.0 m; Skirt - 2.25 - 2.75 m; Kids Frock - 1.75 m; Scarf - 1.0 - 2.0 m (all at 44 inch width). The full chart on this page covers 37 garment types including menswear, kids wear and home furnishing. What size are the dots? Small (main motif approx. 1/17 of image width) dot set in columns over the ground. This is a geometric print, so it carries a strong, graphic line down the body of a garment. How should I lay out and cut this print? This is an all-over, non-directional print, so pattern pieces can be nested either way up to save cloth. No special matching is needed at the seams. Which fabric quality suits this print best? This listing is Poly Spandex. If you need the same artwork on a different quality - a crisper shirting, a heavier satin, a viscose - we print it to order on any of our 17 bases. Message us using the WhatsApp button on this page. Is polka dot still a current trend? Yes - polka dot is one of the few prints that never fully leaves the range, and it runs strongly for 2026-27 across resort, shirting and womenswear. It is a safe repeat-order print. What colours does this pair with? The ground reads as Cream and the accent as Black. The measured shades in the artwork are approximately #F4F3E4, #2C2D28, #B9AC8F, so you can match trims, linings and thread against those directly. Can I get this in a different colour or scale? Yes. Design 4038 can be recoloured to any Pantone shade, and the print scale can be enlarged or reduced before bulk production, at no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. Our team works with 250+ producible base fabrics in total. Only our 17 highest-volume bases are listed on the website - the full range covers viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp for a specific base. Minimum for an off-catalogue base is 100 metres, and it needs extra lead time. Is this fabric ready stock or made to order? This length is printed to order on Poly Spandex. Nothing is pre-made stock - we print each order specially, so the design can be recoloured, rescaled, or printed on any of our 17 base cloths. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers. Note that 1 unit = 1 metre. How long does delivery take? We dispatch in 4-7 days from order confirmation - that is the printing and finishing time at our Surat mill. Courier transit after that depends on your location in India. Free shipping on orders above Rs1,199 within India. Need a different colour, scale or a base not listed? Our team works with 250+ base fabrics. Message us on WhatsApp or email info@clothwala.com - mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

White & Black Pin Dot Speckle Printed Spandex Fabric - Fine all-over random scatter of tiny round black dots in several pin sizes, evenly dense on a white ground in two colours, printed to order on Poly Spandex and sold by the metre. Available from 1 metre with flexible wholesale minimums, made at our Surat mill and dispatched in 4-7 days. About this print Design 4037 is fine all-over random scatter of tiny round black dots in several pin sizes, evenly dense on a white ground in two colours. The scale is fine (main motif approx. 1/100 of image width). This is an all-over, non-directional print, so pattern pieces can be nested either way up to make the most of the cloth. Measured shades in the artwork run approximately #F6F6F6, #9A9A9A, so trims, linings and thread can be matched directly against those values. One of the designs in the Clothwala 2026 polka dot collection. Fabric needed per garment Quantities below are for a standard non-directional layout at 44 inch width. These allow for one-way (directional) cutting - every piece laid the same way, which is how a print like this must be cut. The full chart further down gives the plain figure without that allowance. All quantities are estimates for a standard size; confirm against your own pattern before ordering. Garment Fabric needed Recommended quality Maxi Dress 3.5 - 4.0 m Poly Georgette (70-90 GSM) Dress 3.5 - 4.0 m Poly Crepe (80-95 GSM) Co-ord Set 3.5 - 4.0 m Poly Crepe (80-95 GSM) Kurti 2.75 m Poly Crepe (80-95 GSM) Saree Blouse 1.25 m Poly Japanese Satin (90-110 GSM) Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Men's Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Skirt 2.25 - 2.75 m Viscose Crepe (110-140 GSM) Kids Frock 1.75 m Cotton Cambric (80-110 GSM) Scarf 1.0 - 2.0 m Poly Chiffon (60-80 GSM) Specifications Design code 4037 Print Pin Dot Speckle - Fine all-over random scatter of tiny round black dots in several pin sizes, evenly dense on a white ground in two colours Ground colour White Accent colour Black Approx. shades #F6F6F6, #9A9A9A Print scale Fine (main motif approx. 1/100 of image width) Repeat All-over / non-directional Suitable garments Shirt, Blouse, Dress, Kurti, Skirt, Kids' Dress, Men's Shirt Fabric Poly Spandex Composition Polyester Stretch Stretchable - 7% Lycra (spandex) GSM 200 gsm (this fabric) Width 54 inch Minimum order From 1 metre; flexible wholesale minimums Production Made to order - customisable Dispatch 4-7 days from our Surat mill Other bases The same artwork prints on any of our 17 bases - ask for a quote Printing High-definition digital print, wash-fast Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Full fabric requirement chart This design is printed on Poly Spandex here, and the same artwork prints to order on any of our 17 base cloths. Quantities are at 44 inch width. Plain figures for a standard size, without a directional-cut allowance - add roughly 0.5 m per garment if every piece must be laid the same way. Estimates: confirm against your own pattern before ordering. Fabric needed for 37 garment types - womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 - 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 - 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 - 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 - 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 - 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 - 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 - 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 - 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 - 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 - 3.5 m Poly Crepe one-piece cut Dress 3.0 - 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 - 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 - 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 - 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 - 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 - 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 - 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 - 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 - 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 - 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 - 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 - 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 - 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 - 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4-8 Kids Kurta 1.5 m Poly Muslin age 4-8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 - 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Bulk pricing 6 metres and above - 10% off 25 metres and above - 15% off 50 metres and above - 20% off 100 metres and above - 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Maxi Dress - 3.5 - 4.0 m; Dress - 3.5 - 4.0 m; Co-ord Set - 3.5 - 4.0 m; Kurti - 2.75 m; Saree Blouse - 1.25 m; Shirt - 2.5 - 3.0 m; Men's Shirt - 2.5 - 3.0 m; Skirt - 2.25 - 2.75 m; Kids Frock - 1.75 m; Scarf - 1.0 - 2.0 m (all at 44 inch width). The full chart on this page covers 37 garment types including menswear, kids wear and home furnishing. What size are the dots? Fine (main motif approx. 1/100 of image width) dot set in columns over the ground. This is a geometric print, so it carries a strong, graphic line down the body of a garment. How should I lay out and cut this print? This is an all-over, non-directional print, so pattern pieces can be nested either way up to save cloth. No special matching is needed at the seams. Which fabric quality suits this print best? This listing is Poly Spandex. If you need the same artwork on a different quality - a crisper shirting, a heavier satin, a viscose - we print it to order on any of our 17 bases. Message us using the WhatsApp button on this page. Is polka dot still a current trend? Yes - polka dot is one of the few prints that never fully leaves the range, and it runs strongly for 2026-27 across resort, shirting and womenswear. It is a safe repeat-order print. What colours does this pair with? The ground reads as White and the accent as Black. The measured shades in the artwork are approximately #F6F6F6, #9A9A9A, so you can match trims, linings and thread against those directly. Can I get this in a different colour or scale? Yes. Design 4037 can be recoloured to any Pantone shade, and the print scale can be enlarged or reduced before bulk production, at no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. Our team works with 250+ producible base fabrics in total. Only our 17 highest-volume bases are listed on the website - the full range covers viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp for a specific base. Minimum for an off-catalogue base is 100 metres, and it needs extra lead time. Is this fabric ready stock or made to order? This length is printed to order on Poly Spandex. Nothing is pre-made stock - we print each order specially, so the design can be recoloured, rescaled, or printed on any of our 17 base cloths. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers. Note that 1 unit = 1 metre. How long does delivery take? We dispatch in 4-7 days from order confirmation - that is the printing and finishing time at our Surat mill. Courier transit after that depends on your location in India. Free shipping on orders above Rs1,199 within India. Need a different colour, scale or a base not listed? Our team works with 250+ base fabrics. Message us on WhatsApp or email info@clothwala.com - mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

White & Black Blobs & Dot Clusters Printed Spandex Fabric - Tossed scatter of hand-painted black blobs with dry-brush texture, round dots, oval clusters of tiny dots and fan-shaped sprays of fine lines, with a few small beige dots, on a white ground, printed to order on Poly Spandex and sold by the metre. Available from 1 metre with flexible wholesale minimums, made at our Surat mill and dispatched in 4-7 days. About this print Design 4036 is tossed scatter of hand-painted black blobs with dry-brush texture, round dots, oval clusters of tiny dots and fan-shaped sprays of fine lines, with a few small beige dots, on a white ground. The scale is small (main motif approx. 1/20 of image width). This is an all-over, non-directional print, so pattern pieces can be nested either way up to make the most of the cloth. Measured shades in the artwork run approximately #F9F9F9, #0B0B0B, #838382, so trims, linings and thread can be matched directly against those values. One of the designs in the Clothwala 2026 polka dot collection. Fabric needed per garment Quantities below are for a standard non-directional layout at 44 inch width. These allow for one-way (directional) cutting - every piece laid the same way, which is how a print like this must be cut. The full chart further down gives the plain figure without that allowance. All quantities are estimates for a standard size; confirm against your own pattern before ordering. Garment Fabric needed Recommended quality Maxi Dress 3.5 - 4.0 m Poly Georgette (70-90 GSM) Dress 3.5 - 4.0 m Poly Crepe (80-95 GSM) Co-ord Set 3.5 - 4.0 m Poly Crepe (80-95 GSM) Kurti 2.75 m Poly Crepe (80-95 GSM) Saree Blouse 1.25 m Poly Japanese Satin (90-110 GSM) Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Men's Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Skirt 2.25 - 2.75 m Viscose Crepe (110-140 GSM) Kids Frock 1.75 m Cotton Cambric (80-110 GSM) Scarf 1.0 - 2.0 m Poly Chiffon (60-80 GSM) Specifications Design code 4036 Print Blobs & Dot Clusters - Tossed scatter of hand-painted black blobs with dry-brush texture, round dots, oval clusters of tiny dots and fan-shaped sprays of fine lines, with a few small beige dots, on a white ground Ground colour White Accent colour Black Approx. shades #F9F9F9, #0B0B0B, #838382 Print scale Small (main motif approx. 1/20 of image width) Repeat All-over / non-directional Suitable garments Blouse, Dress, Shirt, Co-ord Set, Kids' Dress, Nightwear Set, Scarf Fabric Poly Spandex Composition Polyester Stretch Stretchable - 7% Lycra (spandex) GSM 200 gsm (this fabric) Width 54 inch Minimum order From 1 metre; flexible wholesale minimums Production Made to order - customisable Dispatch 4-7 days from our Surat mill Other bases The same artwork prints on any of our 17 bases - ask for a quote Printing High-definition digital print, wash-fast Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Full fabric requirement chart This design is printed on Poly Spandex here, and the same artwork prints to order on any of our 17 base cloths. Quantities are at 44 inch width. Plain figures for a standard size, without a directional-cut allowance - add roughly 0.5 m per garment if every piece must be laid the same way. Estimates: confirm against your own pattern before ordering. Fabric needed for 37 garment types - womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 - 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 - 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 - 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 - 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 - 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 - 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 - 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 - 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 - 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 - 3.5 m Poly Crepe one-piece cut Dress 3.0 - 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 - 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 - 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 - 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 - 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 - 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 - 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 - 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 - 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 - 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 - 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 - 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 - 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 - 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4-8 Kids Kurta 1.5 m Poly Muslin age 4-8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 - 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Bulk pricing 6 metres and above - 10% off 25 metres and above - 15% off 50 metres and above - 20% off 100 metres and above - 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Maxi Dress - 3.5 - 4.0 m; Dress - 3.5 - 4.0 m; Co-ord Set - 3.5 - 4.0 m; Kurti - 2.75 m; Saree Blouse - 1.25 m; Shirt - 2.5 - 3.0 m; Men's Shirt - 2.5 - 3.0 m; Skirt - 2.25 - 2.75 m; Kids Frock - 1.75 m; Scarf - 1.0 - 2.0 m (all at 44 inch width). The full chart on this page covers 37 garment types including menswear, kids wear and home furnishing. What size are the dots? Small (main motif approx. 1/20 of image width) dot set in columns over the ground. This is a geometric print, so it carries a strong, graphic line down the body of a garment. How should I lay out and cut this print? This is an all-over, non-directional print, so pattern pieces can be nested either way up to save cloth. No special matching is needed at the seams. Which fabric quality suits this print best? This listing is Poly Spandex. If you need the same artwork on a different quality - a crisper shirting, a heavier satin, a viscose - we print it to order on any of our 17 bases. Message us using the WhatsApp button on this page. Is polka dot still a current trend? Yes - polka dot is one of the few prints that never fully leaves the range, and it runs strongly for 2026-27 across resort, shirting and womenswear. It is a safe repeat-order print. What colours does this pair with? The ground reads as White and the accent as Black. The measured shades in the artwork are approximately #F9F9F9, #0B0B0B, #838382, so you can match trims, linings and thread against those directly. Can I get this in a different colour or scale? Yes. Design 4036 can be recoloured to any Pantone shade, and the print scale can be enlarged or reduced before bulk production, at no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. Our team works with 250+ producible base fabrics in total. Only our 17 highest-volume bases are listed on the website - the full range covers viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp for a specific base. Minimum for an off-catalogue base is 100 metres, and it needs extra lead time. Is this fabric ready stock or made to order? This length is printed to order on Poly Spandex. Nothing is pre-made stock - we print each order specially, so the design can be recoloured, rescaled, or printed on any of our 17 base cloths. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers. Note that 1 unit = 1 metre. How long does delivery take? We dispatch in 4-7 days from order confirmation - that is the printing and finishing time at our Surat mill. Courier transit after that depends on your location in India. Free shipping on orders above Rs1,199 within India. Need a different colour, scale or a base not listed? Our team works with 250+ base fabrics. Message us on WhatsApp or email info@clothwala.com - mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

Cream & Black Painted Dots & Dabs Printed Spandex Fabric - Spaced scatter of small hand-painted black dots mixed with olive green and soft grey brush dabs, a few peach dots and fine black pin dots, on a cream ground, printed to order on Poly Spandex and sold by the metre. Available from 1 metre with flexible wholesale minimums, made at our Surat mill and dispatched in 4-7 days. About this print Design 4035 is spaced scatter of small hand-painted black dots mixed with olive green and soft grey brush dabs, a few peach dots and fine black pin dots, on a cream ground. The scale is fine (main motif approx. 1/33 of image width). This is an all-over, non-directional print, so pattern pieces can be nested either way up to make the most of the cloth. Measured shades in the artwork run approximately #F5F7E5, #1E1F19, #6F7163, #9C9E8F, so trims, linings and thread can be matched directly against those values. One of the designs in the Clothwala 2026 polka dot collection. Fabric needed per garment Quantities below are for a standard non-directional layout at 44 inch width. These allow for one-way (directional) cutting - every piece laid the same way, which is how a print like this must be cut. The full chart further down gives the plain figure without that allowance. All quantities are estimates for a standard size; confirm against your own pattern before ordering. Garment Fabric needed Recommended quality Maxi Dress 3.5 - 4.0 m Poly Georgette (70-90 GSM) Dress 3.5 - 4.0 m Poly Crepe (80-95 GSM) Co-ord Set 3.5 - 4.0 m Poly Crepe (80-95 GSM) Kurti 2.75 m Poly Crepe (80-95 GSM) Saree Blouse 1.25 m Poly Japanese Satin (90-110 GSM) Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Men's Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Skirt 2.25 - 2.75 m Viscose Crepe (110-140 GSM) Kids Frock 1.75 m Cotton Cambric (80-110 GSM) Scarf 1.0 - 2.0 m Poly Chiffon (60-80 GSM) Specifications Design code 4035 Print Painted Dots & Dabs - Spaced scatter of small hand-painted black dots mixed with olive green and soft grey brush dabs, a few peach dots and fine black pin dots, on a cream ground Ground colour Cream Accent colour Black Approx. shades #F5F7E5, #1E1F19, #6F7163, #9C9E8F Print scale Fine (main motif approx. 1/33 of image width) Repeat All-over / non-directional Suitable garments Blouse, Dress, Shirt, Kurti, Kids' Dress, Nightwear Set, Scarf Fabric Poly Spandex Composition Polyester Stretch Stretchable - 7% Lycra (spandex) GSM 200 gsm (this fabric) Width 54 inch Minimum order From 1 metre; flexible wholesale minimums Production Made to order - customisable Dispatch 4-7 days from our Surat mill Other bases The same artwork prints on any of our 17 bases - ask for a quote Printing High-definition digital print, wash-fast Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Full fabric requirement chart This design is printed on Poly Spandex here, and the same artwork prints to order on any of our 17 base cloths. Quantities are at 44 inch width. Plain figures for a standard size, without a directional-cut allowance - add roughly 0.5 m per garment if every piece must be laid the same way. Estimates: confirm against your own pattern before ordering. Fabric needed for 37 garment types - womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 - 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 - 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 - 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 - 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 - 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 - 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 - 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 - 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 - 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 - 3.5 m Poly Crepe one-piece cut Dress 3.0 - 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 - 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 - 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 - 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 - 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 - 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 - 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 - 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 - 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 - 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 - 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 - 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 - 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 - 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4-8 Kids Kurta 1.5 m Poly Muslin age 4-8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 - 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Bulk pricing 6 metres and above - 10% off 25 metres and above - 15% off 50 metres and above - 20% off 100 metres and above - 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Maxi Dress - 3.5 - 4.0 m; Dress - 3.5 - 4.0 m; Co-ord Set - 3.5 - 4.0 m; Kurti - 2.75 m; Saree Blouse - 1.25 m; Shirt - 2.5 - 3.0 m; Men's Shirt - 2.5 - 3.0 m; Skirt - 2.25 - 2.75 m; Kids Frock - 1.75 m; Scarf - 1.0 - 2.0 m (all at 44 inch width). The full chart on this page covers 37 garment types including menswear, kids wear and home furnishing. What size are the dots? Fine (main motif approx. 1/33 of image width) dot set in columns over the ground. This is a geometric print, so it carries a strong, graphic line down the body of a garment. How should I lay out and cut this print? This is an all-over, non-directional print, so pattern pieces can be nested either way up to save cloth. No special matching is needed at the seams. Which fabric quality suits this print best? This listing is Poly Spandex. If you need the same artwork on a different quality - a crisper shirting, a heavier satin, a viscose - we print it to order on any of our 17 bases. Message us using the WhatsApp button on this page. Is polka dot still a current trend? Yes - polka dot is one of the few prints that never fully leaves the range, and it runs strongly for 2026-27 across resort, shirting and womenswear. It is a safe repeat-order print. What colours does this pair with? The ground reads as Cream and the accent as Black. The measured shades in the artwork are approximately #F5F7E5, #1E1F19, #6F7163, #9C9E8F, so you can match trims, linings and thread against those directly. Can I get this in a different colour or scale? Yes. Design 4035 can be recoloured to any Pantone shade, and the print scale can be enlarged or reduced before bulk production, at no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. Our team works with 250+ producible base fabrics in total. Only our 17 highest-volume bases are listed on the website - the full range covers viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp for a specific base. Minimum for an off-catalogue base is 100 metres, and it needs extra lead time. Is this fabric ready stock or made to order? This length is printed to order on Poly Spandex. Nothing is pre-made stock - we print each order specially, so the design can be recoloured, rescaled, or printed on any of our 17 base cloths. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers. Note that 1 unit = 1 metre. How long does delivery take? We dispatch in 4-7 days from order confirmation - that is the printing and finishing time at our Surat mill. Courier transit after that depends on your location in India. Free shipping on orders above Rs1,199 within India. Need a different colour, scale or a base not listed? Our team works with 250+ base fabrics. Message us on WhatsApp or email info@clothwala.com - mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

Off-White & Black Dense Ink Speckle Printed Spandex Fabric - Dense all-over speckle of tiny black dots and small irregular blots in mixed sizes, on an off-white ground with faint light grey mottling, printed to order on Poly Spandex and sold by the metre. Available from 1 metre with flexible wholesale minimums, made at our Surat mill and dispatched in 4-7 days. About this print Design 4034 is dense all-over speckle of tiny black dots and small irregular blots in mixed sizes, on an off-white ground with faint light grey mottling. The scale is fine (main motif approx. 1/50 of image width). This is an all-over, non-directional print, so pattern pieces can be nested either way up to make the most of the cloth. Measured shades in the artwork run approximately #F0F0F0, #414141, #CBCBCB, so trims, linings and thread can be matched directly against those values. One of the designs in the Clothwala 2026 polka dot collection. Fabric needed per garment Quantities below are for a standard non-directional layout at 44 inch width. These allow for one-way (directional) cutting - every piece laid the same way, which is how a print like this must be cut. The full chart further down gives the plain figure without that allowance. All quantities are estimates for a standard size; confirm against your own pattern before ordering. Garment Fabric needed Recommended quality Maxi Dress 3.5 - 4.0 m Poly Georgette (70-90 GSM) Dress 3.5 - 4.0 m Poly Crepe (80-95 GSM) Co-ord Set 3.5 - 4.0 m Poly Crepe (80-95 GSM) Kurti 2.75 m Poly Crepe (80-95 GSM) Saree Blouse 1.25 m Poly Japanese Satin (90-110 GSM) Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Men's Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Skirt 2.25 - 2.75 m Viscose Crepe (110-140 GSM) Kids Frock 1.75 m Cotton Cambric (80-110 GSM) Scarf 1.0 - 2.0 m Poly Chiffon (60-80 GSM) Specifications Design code 4034 Print Dense Ink Speckle - Dense all-over speckle of tiny black dots and small irregular blots in mixed sizes, on an off-white ground with faint light grey mottling Ground colour Off-White Accent colour Black Approx. shades #F0F0F0, #414141, #CBCBCB Print scale Fine (main motif approx. 1/50 of image width) Repeat All-over / non-directional Suitable garments Shirt, Blouse, Dress, Co-ord Set, Skirt, Kids' Dress, Men's Shirt Fabric Poly Spandex Composition Polyester Stretch Stretchable - 7% Lycra (spandex) GSM 200 gsm (this fabric) Width 54 inch Minimum order From 1 metre; flexible wholesale minimums Production Made to order - customisable Dispatch 4-7 days from our Surat mill Other bases The same artwork prints on any of our 17 bases - ask for a quote Printing High-definition digital print, wash-fast Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Full fabric requirement chart This design is printed on Poly Spandex here, and the same artwork prints to order on any of our 17 base cloths. Quantities are at 44 inch width. Plain figures for a standard size, without a directional-cut allowance - add roughly 0.5 m per garment if every piece must be laid the same way. Estimates: confirm against your own pattern before ordering. Fabric needed for 37 garment types - womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 - 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 - 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 - 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 - 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 - 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 - 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 - 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 - 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 - 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 - 3.5 m Poly Crepe one-piece cut Dress 3.0 - 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 - 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 - 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 - 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 - 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 - 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 - 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 - 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 - 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 - 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 - 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 - 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 - 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 - 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4-8 Kids Kurta 1.5 m Poly Muslin age 4-8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 - 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Bulk pricing 6 metres and above - 10% off 25 metres and above - 15% off 50 metres and above - 20% off 100 metres and above - 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Maxi Dress - 3.5 - 4.0 m; Dress - 3.5 - 4.0 m; Co-ord Set - 3.5 - 4.0 m; Kurti - 2.75 m; Saree Blouse - 1.25 m; Shirt - 2.5 - 3.0 m; Men's Shirt - 2.5 - 3.0 m; Skirt - 2.25 - 2.75 m; Kids Frock - 1.75 m; Scarf - 1.0 - 2.0 m (all at 44 inch width). The full chart on this page covers 37 garment types including menswear, kids wear and home furnishing. What size are the dots? Fine (main motif approx. 1/50 of image width) dot set in columns over the ground. This is a geometric print, so it carries a strong, graphic line down the body of a garment. How should I lay out and cut this print? This is an all-over, non-directional print, so pattern pieces can be nested either way up to save cloth. No special matching is needed at the seams. Which fabric quality suits this print best? This listing is Poly Spandex. If you need the same artwork on a different quality - a crisper shirting, a heavier satin, a viscose - we print it to order on any of our 17 bases. Message us using the WhatsApp button on this page. Is polka dot still a current trend? Yes - polka dot is one of the few prints that never fully leaves the range, and it runs strongly for 2026-27 across resort, shirting and womenswear. It is a safe repeat-order print. What colours does this pair with? The ground reads as Off-White and the accent as Black. The measured shades in the artwork are approximately #F0F0F0, #414141, #CBCBCB, so you can match trims, linings and thread against those directly. Can I get this in a different colour or scale? Yes. Design 4034 can be recoloured to any Pantone shade, and the print scale can be enlarged or reduced before bulk production, at no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. Our team works with 250+ producible base fabrics in total. Only our 17 highest-volume bases are listed on the website - the full range covers viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp for a specific base. Minimum for an off-catalogue base is 100 metres, and it needs extra lead time. Is this fabric ready stock or made to order? This length is printed to order on Poly Spandex. Nothing is pre-made stock - we print each order specially, so the design can be recoloured, rescaled, or printed on any of our 17 base cloths. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers. Note that 1 unit = 1 metre. How long does delivery take? We dispatch in 4-7 days from order confirmation - that is the printing and finishing time at our Surat mill. Courier transit after that depends on your location in India. Free shipping on orders above Rs1,199 within India. Need a different colour, scale or a base not listed? Our team works with 250+ base fabrics. Message us on WhatsApp or email info@clothwala.com - mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

White & Black Blob Skin Spots Printed Spandex Fabric - Dense all-over animal-skin style layout of solid black irregular blobs surrounded by many small rounded spots that shrink and stretch across the repeat, on a white ground in two colours, printed to order on Poly Spandex and sold by the metre. Available from 1 metre with flexible wholesale minimums, made at our Surat mill and dispatched in 4-7 days. About this print Design 4033 is dense all-over animal-skin style layout of solid black irregular blobs surrounded by many small rounded spots that shrink and stretch across the repeat, on a white ground in two colours. The scale is small (main motif approx. 1/12 of image width). This is an all-over, non-directional print, so pattern pieces can be nested either way up to make the most of the cloth. Measured shades in the artwork run approximately #F0F0F0, #070707, so trims, linings and thread can be matched directly against those values. One of the designs in the Clothwala 2026 polka dot collection. Fabric needed per garment Quantities below are for a standard non-directional layout at 44 inch width. These allow for one-way (directional) cutting - every piece laid the same way, which is how a print like this must be cut. The full chart further down gives the plain figure without that allowance. All quantities are estimates for a standard size; confirm against your own pattern before ordering. Garment Fabric needed Recommended quality Maxi Dress 3.5 - 4.0 m Poly Georgette (70-90 GSM) Dress 3.5 - 4.0 m Poly Crepe (80-95 GSM) Co-ord Set 3.5 - 4.0 m Poly Crepe (80-95 GSM) Kurti 2.75 m Poly Crepe (80-95 GSM) Saree Blouse 1.25 m Poly Japanese Satin (90-110 GSM) Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Men's Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Skirt 2.25 - 2.75 m Viscose Crepe (110-140 GSM) Kids Frock 1.75 m Cotton Cambric (80-110 GSM) Scarf 1.0 - 2.0 m Poly Chiffon (60-80 GSM) Specifications Design code 4033 Print Blob Skin Spots - Dense all-over animal-skin style layout of solid black irregular blobs surrounded by many small rounded spots that shrink and stretch across the repeat, on a white ground in two colours Ground colour White Accent colour Black Approx. shades #F0F0F0, #070707 Print scale Small (main motif approx. 1/12 of image width) Repeat All-over / non-directional Suitable garments Dress, Shirt, Blouse, Skirt, Co-ord Set, Kaftan, Scarf Fabric Poly Spandex Composition Polyester Stretch Stretchable - 7% Lycra (spandex) GSM 200 gsm (this fabric) Width 54 inch Minimum order From 1 metre; flexible wholesale minimums Production Made to order - customisable Dispatch 4-7 days from our Surat mill Other bases The same artwork prints on any of our 17 bases - ask for a quote Printing High-definition digital print, wash-fast Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Full fabric requirement chart This design is printed on Poly Spandex here, and the same artwork prints to order on any of our 17 base cloths. Quantities are at 44 inch width. Plain figures for a standard size, without a directional-cut allowance - add roughly 0.5 m per garment if every piece must be laid the same way. Estimates: confirm against your own pattern before ordering. Fabric needed for 37 garment types - womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 - 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 - 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 - 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 - 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 - 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 - 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 - 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 - 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 - 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 - 3.5 m Poly Crepe one-piece cut Dress 3.0 - 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 - 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 - 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 - 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 - 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 - 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 - 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 - 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 - 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 - 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 - 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 - 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 - 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 - 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4-8 Kids Kurta 1.5 m Poly Muslin age 4-8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 - 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Bulk pricing 6 metres and above - 10% off 25 metres and above - 15% off 50 metres and above - 20% off 100 metres and above - 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Maxi Dress - 3.5 - 4.0 m; Dress - 3.5 - 4.0 m; Co-ord Set - 3.5 - 4.0 m; Kurti - 2.75 m; Saree Blouse - 1.25 m; Shirt - 2.5 - 3.0 m; Men's Shirt - 2.5 - 3.0 m; Skirt - 2.25 - 2.75 m; Kids Frock - 1.75 m; Scarf - 1.0 - 2.0 m (all at 44 inch width). The full chart on this page covers 37 garment types including menswear, kids wear and home furnishing. What size are the dots? Small (main motif approx. 1/12 of image width) dot set in columns over the ground. This is a geometric print, so it carries a strong, graphic line down the body of a garment. How should I lay out and cut this print? This is an all-over, non-directional print, so pattern pieces can be nested either way up to save cloth. No special matching is needed at the seams. Which fabric quality suits this print best? This listing is Poly Spandex. If you need the same artwork on a different quality - a crisper shirting, a heavier satin, a viscose - we print it to order on any of our 17 bases. Message us using the WhatsApp button on this page. Is polka dot still a current trend? Yes - polka dot is one of the few prints that never fully leaves the range, and it runs strongly for 2026-27 across resort, shirting and womenswear. It is a safe repeat-order print. What colours does this pair with? The ground reads as White and the accent as Black. The measured shades in the artwork are approximately #F0F0F0, #070707, so you can match trims, linings and thread against those directly. Can I get this in a different colour or scale? Yes. Design 4033 can be recoloured to any Pantone shade, and the print scale can be enlarged or reduced before bulk production, at no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. Our team works with 250+ producible base fabrics in total. Only our 17 highest-volume bases are listed on the website - the full range covers viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp for a specific base. Minimum for an off-catalogue base is 100 metres, and it needs extra lead time. Is this fabric ready stock or made to order? This length is printed to order on Poly Spandex. Nothing is pre-made stock - we print each order specially, so the design can be recoloured, rescaled, or printed on any of our 17 base cloths. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers. Note that 1 unit = 1 metre. How long does delivery take? We dispatch in 4-7 days from order confirmation - that is the printing and finishing time at our Surat mill. Courier transit after that depends on your location in India. Free shipping on orders above Rs1,199 within India. Need a different colour, scale or a base not listed? Our team works with 250+ base fabrics. Message us on WhatsApp or email info@clothwala.com - mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

White & Black Swirling Oval Dots Printed Spandex Fabric - All-over scatter of flat black oval dots and short elongated dashes in mixed sizes, tilted so they follow loose swirling lines, on a white ground in two colours, printed to order on Poly Spandex and sold by the metre. Available from 1 metre with flexible wholesale minimums, made at our Surat mill and dispatched in 4-7 days. About this print Design 4032 is all-over scatter of flat black oval dots and short elongated dashes in mixed sizes, tilted so they follow loose swirling lines, on a white ground in two colours. The scale is small (main motif approx. 1/25 of image width). This is an all-over, non-directional print, so pattern pieces can be nested either way up to make the most of the cloth. Measured shades in the artwork run approximately #F7F7F7, #151515, so trims, linings and thread can be matched directly against those values. One of the designs in the Clothwala 2026 polka dot collection. Fabric needed per garment Quantities below are for a standard non-directional layout at 44 inch width. These allow for one-way (directional) cutting - every piece laid the same way, which is how a print like this must be cut. The full chart further down gives the plain figure without that allowance. All quantities are estimates for a standard size; confirm against your own pattern before ordering. Garment Fabric needed Recommended quality Maxi Dress 3.5 - 4.0 m Poly Georgette (70-90 GSM) Dress 3.5 - 4.0 m Poly Crepe (80-95 GSM) Co-ord Set 3.5 - 4.0 m Poly Crepe (80-95 GSM) Kurti 2.75 m Poly Crepe (80-95 GSM) Saree Blouse 1.25 m Poly Japanese Satin (90-110 GSM) Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Men's Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Skirt 2.25 - 2.75 m Viscose Crepe (110-140 GSM) Kids Frock 1.75 m Cotton Cambric (80-110 GSM) Scarf 1.0 - 2.0 m Poly Chiffon (60-80 GSM) Specifications Design code 4032 Print Swirling Oval Dots - All-over scatter of flat black oval dots and short elongated dashes in mixed sizes, tilted so they follow loose swirling lines, on a white ground in two colours Ground colour White Accent colour Black Approx. shades #F7F7F7, #151515 Print scale Small (main motif approx. 1/25 of image width) Repeat All-over / non-directional Suitable garments Dress, Blouse, Shirt, Skirt, Co-ord Set, Kids' Dress, Top Fabric Poly Spandex Composition Polyester Stretch Stretchable - 7% Lycra (spandex) GSM 200 gsm (this fabric) Width 54 inch Minimum order From 1 metre; flexible wholesale minimums Production Made to order - customisable Dispatch 4-7 days from our Surat mill Other bases The same artwork prints on any of our 17 bases - ask for a quote Printing High-definition digital print, wash-fast Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Full fabric requirement chart This design is printed on Poly Spandex here, and the same artwork prints to order on any of our 17 base cloths. Quantities are at 44 inch width. Plain figures for a standard size, without a directional-cut allowance - add roughly 0.5 m per garment if every piece must be laid the same way. Estimates: confirm against your own pattern before ordering. Fabric needed for 37 garment types - womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 - 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 - 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 - 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 - 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 - 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 - 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 - 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 - 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 - 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 - 3.5 m Poly Crepe one-piece cut Dress 3.0 - 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 - 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 - 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 - 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 - 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 - 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 - 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 - 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 - 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 - 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 - 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 - 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 - 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 - 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4-8 Kids Kurta 1.5 m Poly Muslin age 4-8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 - 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Bulk pricing 6 metres and above - 10% off 25 metres and above - 15% off 50 metres and above - 20% off 100 metres and above - 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Maxi Dress - 3.5 - 4.0 m; Dress - 3.5 - 4.0 m; Co-ord Set - 3.5 - 4.0 m; Kurti - 2.75 m; Saree Blouse - 1.25 m; Shirt - 2.5 - 3.0 m; Men's Shirt - 2.5 - 3.0 m; Skirt - 2.25 - 2.75 m; Kids Frock - 1.75 m; Scarf - 1.0 - 2.0 m (all at 44 inch width). The full chart on this page covers 37 garment types including menswear, kids wear and home furnishing. What size are the dots? Small (main motif approx. 1/25 of image width) dot set in columns over the ground. This is a geometric print, so it carries a strong, graphic line down the body of a garment. How should I lay out and cut this print? This is an all-over, non-directional print, so pattern pieces can be nested either way up to save cloth. No special matching is needed at the seams. Which fabric quality suits this print best? This listing is Poly Spandex. If you need the same artwork on a different quality - a crisper shirting, a heavier satin, a viscose - we print it to order on any of our 17 bases. Message us using the WhatsApp button on this page. Is polka dot still a current trend? Yes - polka dot is one of the few prints that never fully leaves the range, and it runs strongly for 2026-27 across resort, shirting and womenswear. It is a safe repeat-order print. What colours does this pair with? The ground reads as White and the accent as Black. The measured shades in the artwork are approximately #F7F7F7, #151515, so you can match trims, linings and thread against those directly. Can I get this in a different colour or scale? Yes. Design 4032 can be recoloured to any Pantone shade, and the print scale can be enlarged or reduced before bulk production, at no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. Our team works with 250+ producible base fabrics in total. Only our 17 highest-volume bases are listed on the website - the full range covers viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp for a specific base. Minimum for an off-catalogue base is 100 metres, and it needs extra lead time. Is this fabric ready stock or made to order? This length is printed to order on Poly Spandex. Nothing is pre-made stock - we print each order specially, so the design can be recoloured, rescaled, or printed on any of our 17 base cloths. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers. Note that 1 unit = 1 metre. How long does delivery take? We dispatch in 4-7 days from order confirmation - that is the printing and finishing time at our Surat mill. Courier transit after that depends on your location in India. Free shipping on orders above Rs1,199 within India. Need a different colour, scale or a base not listed? Our team works with 250+ base fabrics. Message us on WhatsApp or email info@clothwala.com - mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

White & Black Scattered Oval Spots Printed Spandex Fabric - Tossed all-over scatter of flat black oval and round spots in mixed small sizes, loosely grouped in clusters like a dalmatian spot, on a white ground in two colours, printed to order on Poly Spandex and sold by the metre. Available from 1 metre with flexible wholesale minimums, made at our Surat mill and dispatched in 4-7 days. About this print Design 4031 is tossed all-over scatter of flat black oval and round spots in mixed small sizes, loosely grouped in clusters like a dalmatian spot, on a white ground in two colours. The scale is fine (main motif approx. 1/33 of image width). This is an all-over, non-directional print, so pattern pieces can be nested either way up to make the most of the cloth. Measured shades in the artwork run approximately #F8F8F8, #151515, so trims, linings and thread can be matched directly against those values. One of the designs in the Clothwala 2026 polka dot collection. Fabric needed per garment Quantities below are for a standard non-directional layout at 44 inch width. These allow for one-way (directional) cutting - every piece laid the same way, which is how a print like this must be cut. The full chart further down gives the plain figure without that allowance. All quantities are estimates for a standard size; confirm against your own pattern before ordering. Garment Fabric needed Recommended quality Maxi Dress 3.5 - 4.0 m Poly Georgette (70-90 GSM) Dress 3.5 - 4.0 m Poly Crepe (80-95 GSM) Co-ord Set 3.5 - 4.0 m Poly Crepe (80-95 GSM) Kurti 2.75 m Poly Crepe (80-95 GSM) Saree Blouse 1.25 m Poly Japanese Satin (90-110 GSM) Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Men's Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Skirt 2.25 - 2.75 m Viscose Crepe (110-140 GSM) Kids Frock 1.75 m Cotton Cambric (80-110 GSM) Scarf 1.0 - 2.0 m Poly Chiffon (60-80 GSM) Specifications Design code 4031 Print Scattered Oval Spots - Tossed all-over scatter of flat black oval and round spots in mixed small sizes, loosely grouped in clusters like a dalmatian spot, on a white ground in two colours Ground colour White Accent colour Black Approx. shades #F8F8F8, #151515 Print scale Fine (main motif approx. 1/33 of image width) Repeat All-over / non-directional Suitable garments Dress, Blouse, Shirt, Skirt, Co-ord Set, Kids' Dress, Scarf Fabric Poly Spandex Composition Polyester Stretch Stretchable - 7% Lycra (spandex) GSM 200 gsm (this fabric) Width 54 inch Minimum order From 1 metre; flexible wholesale minimums Production Made to order - customisable Dispatch 4-7 days from our Surat mill Other bases The same artwork prints on any of our 17 bases - ask for a quote Printing High-definition digital print, wash-fast Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Full fabric requirement chart This design is printed on Poly Spandex here, and the same artwork prints to order on any of our 17 base cloths. Quantities are at 44 inch width. Plain figures for a standard size, without a directional-cut allowance - add roughly 0.5 m per garment if every piece must be laid the same way. Estimates: confirm against your own pattern before ordering. Fabric needed for 37 garment types - womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 - 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 - 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 - 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 - 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 - 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 - 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 - 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 - 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 - 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 - 3.5 m Poly Crepe one-piece cut Dress 3.0 - 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 - 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 - 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 - 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 - 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 - 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 - 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 - 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 - 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 - 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 - 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 - 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 - 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 - 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4-8 Kids Kurta 1.5 m Poly Muslin age 4-8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 - 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Bulk pricing 6 metres and above - 10% off 25 metres and above - 15% off 50 metres and above - 20% off 100 metres and above - 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Maxi Dress - 3.5 - 4.0 m; Dress - 3.5 - 4.0 m; Co-ord Set - 3.5 - 4.0 m; Kurti - 2.75 m; Saree Blouse - 1.25 m; Shirt - 2.5 - 3.0 m; Men's Shirt - 2.5 - 3.0 m; Skirt - 2.25 - 2.75 m; Kids Frock - 1.75 m; Scarf - 1.0 - 2.0 m (all at 44 inch width). The full chart on this page covers 37 garment types including menswear, kids wear and home furnishing. What size are the dots? Fine (main motif approx. 1/33 of image width) dot set in columns over the ground. This is a geometric print, so it carries a strong, graphic line down the body of a garment. How should I lay out and cut this print? This is an all-over, non-directional print, so pattern pieces can be nested either way up to save cloth. No special matching is needed at the seams. Which fabric quality suits this print best? This listing is Poly Spandex. If you need the same artwork on a different quality - a crisper shirting, a heavier satin, a viscose - we print it to order on any of our 17 bases. Message us using the WhatsApp button on this page. Is polka dot still a current trend? Yes - polka dot is one of the few prints that never fully leaves the range, and it runs strongly for 2026-27 across resort, shirting and womenswear. It is a safe repeat-order print. What colours does this pair with? The ground reads as White and the accent as Black. The measured shades in the artwork are approximately #F8F8F8, #151515, so you can match trims, linings and thread against those directly. Can I get this in a different colour or scale? Yes. Design 4031 can be recoloured to any Pantone shade, and the print scale can be enlarged or reduced before bulk production, at no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. Our team works with 250+ producible base fabrics in total. Only our 17 highest-volume bases are listed on the website - the full range covers viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp for a specific base. Minimum for an off-catalogue base is 100 metres, and it needs extra lead time. Is this fabric ready stock or made to order? This length is printed to order on Poly Spandex. Nothing is pre-made stock - we print each order specially, so the design can be recoloured, rescaled, or printed on any of our 17 base cloths. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers. Note that 1 unit = 1 metre. How long does delivery take? We dispatch in 4-7 days from order confirmation - that is the printing and finishing time at our Surat mill. Courier transit after that depends on your location in India. Free shipping on orders above Rs1,199 within India. Need a different colour, scale or a base not listed? Our team works with 250+ base fabrics. Message us on WhatsApp or email info@clothwala.com - mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

White & Black Ink Spatter Drops Printed Spandex Fabric - Scattered all-over layout of small black ink drops, teardrop splashes and fine dots of mixed size, with a few faint grey flecks, on an open white ground, printed to order on Poly Spandex and sold by the metre. Available from 1 metre with flexible wholesale minimums, made at our Surat mill and dispatched in 4-7 days. About this print Design 4030 is scattered all-over layout of small black ink drops, teardrop splashes and fine dots of mixed size, with a few faint grey flecks, on an open white ground. The scale is fine (main motif approx. 1/33 of image width). This is an all-over, non-directional print, so pattern pieces can be nested either way up to make the most of the cloth. Measured shades in the artwork run approximately #F5F5F5, #232323, #C0C0C0, so trims, linings and thread can be matched directly against those values. One of the designs in the Clothwala 2026 polka dot collection. Fabric needed per garment Quantities below are for a standard non-directional layout at 44 inch width. These allow for one-way (directional) cutting - every piece laid the same way, which is how a print like this must be cut. The full chart further down gives the plain figure without that allowance. All quantities are estimates for a standard size; confirm against your own pattern before ordering. Garment Fabric needed Recommended quality Maxi Dress 3.5 - 4.0 m Poly Georgette (70-90 GSM) Dress 3.5 - 4.0 m Poly Crepe (80-95 GSM) Co-ord Set 3.5 - 4.0 m Poly Crepe (80-95 GSM) Kurti 2.75 m Poly Crepe (80-95 GSM) Saree Blouse 1.25 m Poly Japanese Satin (90-110 GSM) Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Men's Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Skirt 2.25 - 2.75 m Viscose Crepe (110-140 GSM) Kids Frock 1.75 m Cotton Cambric (80-110 GSM) Scarf 1.0 - 2.0 m Poly Chiffon (60-80 GSM) Specifications Design code 4030 Print Ink Spatter Drops - Scattered all-over layout of small black ink drops, teardrop splashes and fine dots of mixed size, with a few faint grey flecks, on an open white ground Ground colour White Accent colour Black Approx. shades #F5F5F5, #232323, #C0C0C0 Print scale Fine (main motif approx. 1/33 of image width) Repeat All-over / non-directional Suitable garments Shirt, Blouse, Dress, Co-ord Set, Skirt, Kids' Dress, Scarf Fabric Poly Spandex Composition Polyester Stretch Stretchable - 7% Lycra (spandex) GSM 200 gsm (this fabric) Width 54 inch Minimum order From 1 metre; flexible wholesale minimums Production Made to order - customisable Dispatch 4-7 days from our Surat mill Other bases The same artwork prints on any of our 17 bases - ask for a quote Printing High-definition digital print, wash-fast Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Full fabric requirement chart This design is printed on Poly Spandex here, and the same artwork prints to order on any of our 17 base cloths. Quantities are at 44 inch width. Plain figures for a standard size, without a directional-cut allowance - add roughly 0.5 m per garment if every piece must be laid the same way. Estimates: confirm against your own pattern before ordering. Fabric needed for 37 garment types - womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 - 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 - 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 - 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 - 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 - 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 - 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 - 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 - 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 - 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 - 3.5 m Poly Crepe one-piece cut Dress 3.0 - 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 - 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 - 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 - 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 - 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 - 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 - 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 - 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 - 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 - 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 - 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 - 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 - 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 - 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4-8 Kids Kurta 1.5 m Poly Muslin age 4-8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 - 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Bulk pricing 6 metres and above - 10% off 25 metres and above - 15% off 50 metres and above - 20% off 100 metres and above - 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Maxi Dress - 3.5 - 4.0 m; Dress - 3.5 - 4.0 m; Co-ord Set - 3.5 - 4.0 m; Kurti - 2.75 m; Saree Blouse - 1.25 m; Shirt - 2.5 - 3.0 m; Men's Shirt - 2.5 - 3.0 m; Skirt - 2.25 - 2.75 m; Kids Frock - 1.75 m; Scarf - 1.0 - 2.0 m (all at 44 inch width). The full chart on this page covers 37 garment types including menswear, kids wear and home furnishing. What size are the dots? Fine (main motif approx. 1/33 of image width) dot set in columns over the ground. This is a geometric print, so it carries a strong, graphic line down the body of a garment. How should I lay out and cut this print? This is an all-over, non-directional print, so pattern pieces can be nested either way up to save cloth. No special matching is needed at the seams. Which fabric quality suits this print best? This listing is Poly Spandex. If you need the same artwork on a different quality - a crisper shirting, a heavier satin, a viscose - we print it to order on any of our 17 bases. Message us using the WhatsApp button on this page. Is polka dot still a current trend? Yes - polka dot is one of the few prints that never fully leaves the range, and it runs strongly for 2026-27 across resort, shirting and womenswear. It is a safe repeat-order print. What colours does this pair with? The ground reads as White and the accent as Black. The measured shades in the artwork are approximately #F5F5F5, #232323, #C0C0C0, so you can match trims, linings and thread against those directly. Can I get this in a different colour or scale? Yes. Design 4030 can be recoloured to any Pantone shade, and the print scale can be enlarged or reduced before bulk production, at no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. Our team works with 250+ producible base fabrics in total. Only our 17 highest-volume bases are listed on the website - the full range covers viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp for a specific base. Minimum for an off-catalogue base is 100 metres, and it needs extra lead time. Is this fabric ready stock or made to order? This length is printed to order on Poly Spandex. Nothing is pre-made stock - we print each order specially, so the design can be recoloured, rescaled, or printed on any of our 17 base cloths. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers. Note that 1 unit = 1 metre. How long does delivery take? We dispatch in 4-7 days from order confirmation - that is the printing and finishing time at our Surat mill. Courier transit after that depends on your location in India. Free shipping on orders above Rs1,199 within India. Need a different colour, scale or a base not listed? Our team works with 250+ base fabrics. Message us on WhatsApp or email info@clothwala.com - mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less