Lycra & Stretch Fabric - Wholesale

Pale Greige & Black Leaf Dabs & Sprigs Printed Spandex Fabric - Small-scale spaced print of upright leaf-shaped dabs in black, mustard and orange arranged in loose horizontal bands, with columns of fine black dots and tiny black sprigs, on a pale greige ground, printed to order on Poly Spandex and sold by the metre. Available from 1 metre with flexible wholesale minimums, made at our Surat mill and dispatched in 4-7 days. About this print Design 4089 is small-scale spaced print of upright leaf-shaped dabs in black, mustard and orange arranged in loose horizontal bands, with columns of fine black dots and tiny black sprigs, on a pale greige ground. The scale is fine (main motif approx. 1/50 of image width). The print is directional. All pattern pieces must be cut the same way up, and the design should be matched at centre-front, side seams and sleeve heads. Allow roughly 15-20% extra fabric over a plain print for matching. Measured shades in the artwork run approximately #E7E7D3, #48483E, #DAA44D, so trims, linings and thread can be matched directly against those values. Part of the Clothwala 2026 digital-print range. Fabric needed per garment Quantities below already include the extra allowance needed to cut a one-way directional print. These allow for one-way (directional) cutting - every piece laid the same way, which is how a print like this must be cut. The full chart further down gives the plain figure without that allowance. All quantities are estimates for a standard size; confirm against your own pattern before ordering. Garment Fabric needed Recommended quality Maxi Dress 3.5 - 4.0 m Poly Georgette (70-90 GSM) Dress 3.5 - 4.0 m Poly Crepe (80-95 GSM) Co-ord Set 3.5 - 4.0 m Poly Crepe (80-95 GSM) Kurti 2.75 m Poly Crepe (80-95 GSM) Saree Blouse 1.25 m Poly Japanese Satin (90-110 GSM) Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Men's Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Skirt 2.25 - 2.75 m Viscose Crepe (110-140 GSM) Kids Frock 1.75 m Cotton Cambric (80-110 GSM) Scarf 1.0 - 2.0 m Poly Chiffon (60-80 GSM) Specifications Design code 4089 Print Leaf Dabs & Sprigs - Small-scale spaced print of upright leaf-shaped dabs in black, mustard and orange arranged in loose horizontal bands, with columns of fine black dots and tiny black sprigs, on a pale greige ground Ground colour Pale Greige Accent colour Black Approx. shades #E7E7D3, #48483E, #DAA44D Print scale Fine (main motif approx. 1/50 of image width) Repeat Directional - cut one way Suitable garments Dress, Shirt, Blouse, Kids' Dress, Skirt, Scarf Fabric Poly Spandex Composition Polyester Stretch Stretchable - 7% Lycra (spandex) GSM 200 gsm (this fabric) Width 54 inch Minimum order From 1 metre; flexible wholesale minimums Production Made to order - customisable Dispatch 4-7 days from our Surat mill Other bases The same artwork prints on any of our 17 bases - ask for a quote Printing High-definition digital print, wash-fast Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Full fabric requirement chart This design is printed on Poly Spandex here, and the same artwork prints to order on any of our 17 base cloths. Quantities are at 44 inch width. Plain figures for a standard size, without a directional-cut allowance - add roughly 0.5 m per garment if every piece must be laid the same way. Estimates: confirm against your own pattern before ordering. Fabric needed for 37 garment types - womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 - 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 - 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 - 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 - 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 - 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 - 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 - 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 - 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 - 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 - 3.5 m Poly Crepe one-piece cut Dress 3.0 - 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 - 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 - 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 - 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 - 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 - 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 - 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 - 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 - 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 - 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 - 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 - 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 - 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 - 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4-8 Kids Kurta 1.5 m Poly Muslin age 4-8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 - 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Bulk pricing 6 metres and above - 10% off 25 metres and above - 15% off 50 metres and above - 20% off 100 metres and above - 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Maxi Dress - 3.5 - 4.0 m; Dress - 3.5 - 4.0 m; Co-ord Set - 3.5 - 4.0 m; Kurti - 2.75 m; Saree Blouse - 1.25 m; Shirt - 2.5 - 3.0 m; Men's Shirt - 2.5 - 3.0 m; Skirt - 2.25 - 2.75 m; Kids Frock - 1.75 m; Scarf - 1.0 - 2.0 m (all at 44 inch width, and already uplifted for one-way directional cutting). The full chart on this page covers 37 garment types including menswear, kids wear and home furnishing. How should I lay out and cut this print? This is a directional print, so every pattern piece must be cut the same way up - you cannot turn pieces to save cloth. Match the design at centre-front, at the side seams and across the sleeve head. Budget roughly 15-20% more fabric than a plain or non-directional print, which is why the yardage figures on this page are already uplifted. Which fabric quality suits this print best? This listing is Poly Spandex. If you need the same artwork on a different quality - a crisper shirting, a heavier satin, a viscose - we print it to order on any of our 17 bases. Message us using the WhatsApp button on this page. What colours does this pair with? The ground reads as Pale Greige and the accent as Black. The measured shades in the artwork are approximately #E7E7D3, #48483E, #DAA44D, so you can match trims, linings and thread against those directly. Can I get this in a different colour or scale? Yes. Design 4089 can be recoloured to any Pantone shade, and the print scale can be enlarged or reduced before bulk production, at no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. Our team works with 250+ producible base fabrics in total. Only our 17 highest-volume bases are listed on the website - the full range covers viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp for a specific base. Minimum for an off-catalogue base is 100 metres, and it needs extra lead time. Is this fabric ready stock or made to order? This length is printed to order on Poly Spandex. Nothing is pre-made stock - we print each order specially, so the design can be recoloured, rescaled, or printed on any of our 17 base cloths. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers. Note that 1 unit = 1 metre. How long does delivery take? We dispatch in 4-7 days from order confirmation - that is the printing and finishing time at our Surat mill. Courier transit after that depends on your location in India. Free shipping on orders above Rs1,199 within India. Need a different colour, scale or a base not listed? Our team works with 250+ base fabrics. Message us on WhatsApp or email info@clothwala.com - mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

White & Charcoal Corn Stalks & Wheat Printed Spandex Fabric - All-over one-way print of slender upright corn stalks with shaded charcoal husks and black dotted cobs, sage green leaves and pale yellow wheat ears, over fine vertical lines on a white ground, printed to order on Poly Spandex and sold by the metre. Available from 1 metre with flexible wholesale minimums, made at our Surat mill and dispatched in 4-7 days. About this print Design 4088 is all-over one-way print of slender upright corn stalks with shaded charcoal husks and black dotted cobs, sage green leaves and pale yellow wheat ears, over fine vertical lines on a white ground. The scale is small (main motif approx. 1/12 of image width). The print is directional. All pattern pieces must be cut the same way up, and the design should be matched at centre-front, side seams and sleeve heads. Allow roughly 15-20% extra fabric over a plain print for matching. Measured shades in the artwork run approximately #FAFAF9, #4A4A49, #D3CCAF, #AAABA3, so trims, linings and thread can be matched directly against those values. Part of the Clothwala 2026 digital-print range. Fabric needed per garment Quantities below already include the extra allowance needed to cut a one-way directional print. These allow for one-way (directional) cutting - every piece laid the same way, which is how a print like this must be cut. The full chart further down gives the plain figure without that allowance. All quantities are estimates for a standard size; confirm against your own pattern before ordering. Garment Fabric needed Recommended quality Maxi Dress 3.5 - 4.0 m Poly Georgette (70-90 GSM) Dress 3.5 - 4.0 m Poly Crepe (80-95 GSM) Co-ord Set 3.5 - 4.0 m Poly Crepe (80-95 GSM) Kurti 2.75 m Poly Crepe (80-95 GSM) Saree Blouse 1.25 m Poly Japanese Satin (90-110 GSM) Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Men's Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Skirt 2.25 - 2.75 m Viscose Crepe (110-140 GSM) Kids Frock 1.75 m Cotton Cambric (80-110 GSM) Scarf 1.0 - 2.0 m Poly Chiffon (60-80 GSM) Specifications Design code 4088 Print Corn Stalks & Wheat - All-over one-way print of slender upright corn stalks with shaded charcoal husks and black dotted cobs, sage green leaves and pale yellow wheat ears, over fine vertical lines on a white ground Ground colour White Accent colour Charcoal Approx. shades #FAFAF9, #4A4A49, #D3CCAF, #AAABA3 Print scale Small (main motif approx. 1/12 of image width) Repeat Directional - cut one way Suitable garments Dress, Shirt, Blouse, Skirt, Tunic, Co-ord Set Fabric Poly Spandex Composition Polyester Stretch Stretchable - 7% Lycra (spandex) GSM 200 gsm (this fabric) Width 54 inch Minimum order From 1 metre; flexible wholesale minimums Production Made to order - customisable Dispatch 4-7 days from our Surat mill Other bases The same artwork prints on any of our 17 bases - ask for a quote Printing High-definition digital print, wash-fast Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Full fabric requirement chart This design is printed on Poly Spandex here, and the same artwork prints to order on any of our 17 base cloths. Quantities are at 44 inch width. Plain figures for a standard size, without a directional-cut allowance - add roughly 0.5 m per garment if every piece must be laid the same way. Estimates: confirm against your own pattern before ordering. Fabric needed for 37 garment types - womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 - 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 - 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 - 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 - 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 - 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 - 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 - 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 - 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 - 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 - 3.5 m Poly Crepe one-piece cut Dress 3.0 - 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 - 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 - 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 - 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 - 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 - 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 - 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 - 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 - 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 - 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 - 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 - 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 - 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 - 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4-8 Kids Kurta 1.5 m Poly Muslin age 4-8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 - 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Bulk pricing 6 metres and above - 10% off 25 metres and above - 15% off 50 metres and above - 20% off 100 metres and above - 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Maxi Dress - 3.5 - 4.0 m; Dress - 3.5 - 4.0 m; Co-ord Set - 3.5 - 4.0 m; Kurti - 2.75 m; Saree Blouse - 1.25 m; Shirt - 2.5 - 3.0 m; Men's Shirt - 2.5 - 3.0 m; Skirt - 2.25 - 2.75 m; Kids Frock - 1.75 m; Scarf - 1.0 - 2.0 m (all at 44 inch width, and already uplifted for one-way directional cutting). The full chart on this page covers 37 garment types including menswear, kids wear and home furnishing. How should I lay out and cut this print? This is a directional print, so every pattern piece must be cut the same way up - you cannot turn pieces to save cloth. Match the design at centre-front, at the side seams and across the sleeve head. Budget roughly 15-20% more fabric than a plain or non-directional print, which is why the yardage figures on this page are already uplifted. Which fabric quality suits this print best? This listing is Poly Spandex. If you need the same artwork on a different quality - a crisper shirting, a heavier satin, a viscose - we print it to order on any of our 17 bases. Message us using the WhatsApp button on this page. What colours does this pair with? The ground reads as White and the accent as Charcoal. The measured shades in the artwork are approximately #FAFAF9, #4A4A49, #D3CCAF, #AAABA3, so you can match trims, linings and thread against those directly. Can I get this in a different colour or scale? Yes. Design 4088 can be recoloured to any Pantone shade, and the print scale can be enlarged or reduced before bulk production, at no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. Our team works with 250+ producible base fabrics in total. Only our 17 highest-volume bases are listed on the website - the full range covers viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp for a specific base. Minimum for an off-catalogue base is 100 metres, and it needs extra lead time. Is this fabric ready stock or made to order? This length is printed to order on Poly Spandex. Nothing is pre-made stock - we print each order specially, so the design can be recoloured, rescaled, or printed on any of our 17 base cloths. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers. Note that 1 unit = 1 metre. How long does delivery take? We dispatch in 4-7 days from order confirmation - that is the printing and finishing time at our Surat mill. Courier transit after that depends on your location in India. Free shipping on orders above Rs1,199 within India. Need a different colour, scale or a base not listed? Our team works with 250+ base fabrics. Message us on WhatsApp or email info@clothwala.com - mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

Beige & Black Millet Grain Ears Printed Spandex Fabric - Close-set one-way print of upright elongated grain ears, some solid black or ochre and others built from mustard and brown dots, with thin ochre grass blades between, in vertical columns on a beige ground, printed to order on Poly Spandex and sold by the metre. Available from 1 metre with flexible wholesale minimums, made at our Surat mill and dispatched in 4-7 days. About this print Design 4087 is close-set one-way print of upright elongated grain ears, some solid black or ochre and others built from mustard and brown dots, with thin ochre grass blades between, in vertical columns on a beige ground. The scale is fine (main motif approx. 1/29 of image width). The print is directional. All pattern pieces must be cut the same way up, and the design should be matched at centre-front, side seams and sleeve heads. Allow roughly 15-20% extra fabric over a plain print for matching. Measured shades in the artwork run approximately #D6C29D, #2D2615, #BC8B44, so trims, linings and thread can be matched directly against those values. Part of the Clothwala 2026 digital-print range. Fabric needed per garment Quantities below already include the extra allowance needed to cut a one-way directional print. These allow for one-way (directional) cutting - every piece laid the same way, which is how a print like this must be cut. The full chart further down gives the plain figure without that allowance. All quantities are estimates for a standard size; confirm against your own pattern before ordering. Garment Fabric needed Recommended quality Maxi Dress 3.5 - 4.0 m Poly Georgette (70-90 GSM) Dress 3.5 - 4.0 m Poly Crepe (80-95 GSM) Co-ord Set 3.5 - 4.0 m Poly Crepe (80-95 GSM) Kurti 2.75 m Poly Crepe (80-95 GSM) Saree Blouse 1.25 m Poly Japanese Satin (90-110 GSM) Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Men's Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Skirt 2.25 - 2.75 m Viscose Crepe (110-140 GSM) Kids Frock 1.75 m Cotton Cambric (80-110 GSM) Scarf 1.0 - 2.0 m Poly Chiffon (60-80 GSM) Specifications Design code 4087 Print Millet Grain Ears - Close-set one-way print of upright elongated grain ears, some solid black or ochre and others built from mustard and brown dots, with thin ochre grass blades between, in vertical columns on a beige ground Ground colour Beige Accent colour Black Approx. shades #D6C29D, #2D2615, #BC8B44 Print scale Fine (main motif approx. 1/29 of image width) Repeat Directional - cut one way Suitable garments Shirt, Dress, Kurti, Tunic, Skirt, Co-ord Set Fabric Poly Spandex Composition Polyester Stretch Stretchable - 7% Lycra (spandex) GSM 200 gsm (this fabric) Width 54 inch Minimum order From 1 metre; flexible wholesale minimums Production Made to order - customisable Dispatch 4-7 days from our Surat mill Other bases The same artwork prints on any of our 17 bases - ask for a quote Printing High-definition digital print, wash-fast Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Full fabric requirement chart This design is printed on Poly Spandex here, and the same artwork prints to order on any of our 17 base cloths. Quantities are at 44 inch width. Plain figures for a standard size, without a directional-cut allowance - add roughly 0.5 m per garment if every piece must be laid the same way. Estimates: confirm against your own pattern before ordering. Fabric needed for 37 garment types - womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 - 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 - 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 - 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 - 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 - 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 - 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 - 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 - 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 - 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 - 3.5 m Poly Crepe one-piece cut Dress 3.0 - 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 - 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 - 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 - 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 - 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 - 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 - 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 - 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 - 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 - 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 - 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 - 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 - 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 - 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4-8 Kids Kurta 1.5 m Poly Muslin age 4-8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 - 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Bulk pricing 6 metres and above - 10% off 25 metres and above - 15% off 50 metres and above - 20% off 100 metres and above - 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Maxi Dress - 3.5 - 4.0 m; Dress - 3.5 - 4.0 m; Co-ord Set - 3.5 - 4.0 m; Kurti - 2.75 m; Saree Blouse - 1.25 m; Shirt - 2.5 - 3.0 m; Men's Shirt - 2.5 - 3.0 m; Skirt - 2.25 - 2.75 m; Kids Frock - 1.75 m; Scarf - 1.0 - 2.0 m (all at 44 inch width, and already uplifted for one-way directional cutting). The full chart on this page covers 37 garment types including menswear, kids wear and home furnishing. How should I lay out and cut this print? This is a directional print, so every pattern piece must be cut the same way up - you cannot turn pieces to save cloth. Match the design at centre-front, at the side seams and across the sleeve head. Budget roughly 15-20% more fabric than a plain or non-directional print, which is why the yardage figures on this page are already uplifted. Which fabric quality suits this print best? This listing is Poly Spandex. If you need the same artwork on a different quality - a crisper shirting, a heavier satin, a viscose - we print it to order on any of our 17 bases. Message us using the WhatsApp button on this page. What colours does this pair with? The ground reads as Beige and the accent as Black. The measured shades in the artwork are approximately #D6C29D, #2D2615, #BC8B44, so you can match trims, linings and thread against those directly. Can I get this in a different colour or scale? Yes. Design 4087 can be recoloured to any Pantone shade, and the print scale can be enlarged or reduced before bulk production, at no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. Our team works with 250+ producible base fabrics in total. Only our 17 highest-volume bases are listed on the website - the full range covers viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp for a specific base. Minimum for an off-catalogue base is 100 metres, and it needs extra lead time. Is this fabric ready stock or made to order? This length is printed to order on Poly Spandex. Nothing is pre-made stock - we print each order specially, so the design can be recoloured, rescaled, or printed on any of our 17 base cloths. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers. Note that 1 unit = 1 metre. How long does delivery take? We dispatch in 4-7 days from order confirmation - that is the printing and finishing time at our Surat mill. Courier transit after that depends on your location in India. Free shipping on orders above Rs1,199 within India. Need a different colour, scale or a base not listed? Our team works with 250+ base fabrics. Message us on WhatsApp or email info@clothwala.com - mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

White & Orange Yellow Doodle Leaves & Spirals Printed Spandex Fabric - Small-scale one-way print of hand-drawn leaves, gridded cone shapes, berry stems, spirals and small daisies in black and orange-yellow with dot fillers, evenly scattered on a white ground, printed to order on Poly Spandex and sold by the metre. Available from 1 metre with flexible wholesale minimums, made at our Surat mill and dispatched in 4-7 days. About this print Design 4086 is small-scale one-way print of hand-drawn leaves, gridded cone shapes, berry stems, spirals and small daisies in black and orange-yellow with dot fillers, evenly scattered on a white ground. The scale is small (main motif approx. 1/25 of image width). The print is directional. All pattern pieces must be cut the same way up, and the design should be matched at centre-front, side seams and sleeve heads. Allow roughly 15-20% extra fabric over a plain print for matching. Measured shades in the artwork run approximately #F8F7F0, #3A3836, #E29E2A, so trims, linings and thread can be matched directly against those values. Part of the Clothwala 2026 digital-print range. Fabric needed per garment Quantities below already include the extra allowance needed to cut a one-way directional print. These allow for one-way (directional) cutting - every piece laid the same way, which is how a print like this must be cut. The full chart further down gives the plain figure without that allowance. All quantities are estimates for a standard size; confirm against your own pattern before ordering. Garment Fabric needed Recommended quality Maxi Dress 3.5 - 4.0 m Poly Georgette (70-90 GSM) Dress 3.5 - 4.0 m Poly Crepe (80-95 GSM) Co-ord Set 3.5 - 4.0 m Poly Crepe (80-95 GSM) Kurti 2.75 m Poly Crepe (80-95 GSM) Saree Blouse 1.25 m Poly Japanese Satin (90-110 GSM) Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Men's Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Skirt 2.25 - 2.75 m Viscose Crepe (110-140 GSM) Kids Frock 1.75 m Cotton Cambric (80-110 GSM) Scarf 1.0 - 2.0 m Poly Chiffon (60-80 GSM) Specifications Design code 4086 Print Doodle Leaves & Spirals - Small-scale one-way print of hand-drawn leaves, gridded cone shapes, berry stems, spirals and small daisies in black and orange-yellow with dot fillers, evenly scattered on a white ground Ground colour White Accent colour Orange Yellow Approx. shades #F8F7F0, #3A3836, #E29E2A Print scale Small (main motif approx. 1/25 of image width) Repeat Directional - cut one way Suitable garments Dress, Shirt, Blouse, Kids' Dress, Nightwear Set, Skirt Fabric Poly Spandex Composition Polyester Stretch Stretchable - 7% Lycra (spandex) GSM 200 gsm (this fabric) Width 54 inch Minimum order From 1 metre; flexible wholesale minimums Production Made to order - customisable Dispatch 4-7 days from our Surat mill Other bases The same artwork prints on any of our 17 bases - ask for a quote Printing High-definition digital print, wash-fast Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Full fabric requirement chart This design is printed on Poly Spandex here, and the same artwork prints to order on any of our 17 base cloths. Quantities are at 44 inch width. Plain figures for a standard size, without a directional-cut allowance - add roughly 0.5 m per garment if every piece must be laid the same way. Estimates: confirm against your own pattern before ordering. Fabric needed for 37 garment types - womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 - 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 - 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 - 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 - 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 - 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 - 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 - 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 - 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 - 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 - 3.5 m Poly Crepe one-piece cut Dress 3.0 - 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 - 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 - 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 - 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 - 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 - 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 - 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 - 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 - 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 - 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 - 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 - 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 - 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 - 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4-8 Kids Kurta 1.5 m Poly Muslin age 4-8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 - 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Bulk pricing 6 metres and above - 10% off 25 metres and above - 15% off 50 metres and above - 20% off 100 metres and above - 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Maxi Dress - 3.5 - 4.0 m; Dress - 3.5 - 4.0 m; Co-ord Set - 3.5 - 4.0 m; Kurti - 2.75 m; Saree Blouse - 1.25 m; Shirt - 2.5 - 3.0 m; Men's Shirt - 2.5 - 3.0 m; Skirt - 2.25 - 2.75 m; Kids Frock - 1.75 m; Scarf - 1.0 - 2.0 m (all at 44 inch width, and already uplifted for one-way directional cutting). The full chart on this page covers 37 garment types including menswear, kids wear and home furnishing. How should I lay out and cut this print? This is a directional print, so every pattern piece must be cut the same way up - you cannot turn pieces to save cloth. Match the design at centre-front, at the side seams and across the sleeve head. Budget roughly 15-20% more fabric than a plain or non-directional print, which is why the yardage figures on this page are already uplifted. Which fabric quality suits this print best? This listing is Poly Spandex. If you need the same artwork on a different quality - a crisper shirting, a heavier satin, a viscose - we print it to order on any of our 17 bases. Message us using the WhatsApp button on this page. What colours does this pair with? The ground reads as White and the accent as Orange Yellow. The measured shades in the artwork are approximately #F8F7F0, #3A3836, #E29E2A, so you can match trims, linings and thread against those directly. Can I get this in a different colour or scale? Yes. Design 4086 can be recoloured to any Pantone shade, and the print scale can be enlarged or reduced before bulk production, at no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. Our team works with 250+ producible base fabrics in total. Only our 17 highest-volume bases are listed on the website - the full range covers viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp for a specific base. Minimum for an off-catalogue base is 100 metres, and it needs extra lead time. Is this fabric ready stock or made to order? This length is printed to order on Poly Spandex. Nothing is pre-made stock - we print each order specially, so the design can be recoloured, rescaled, or printed on any of our 17 base cloths. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers. Note that 1 unit = 1 metre. How long does delivery take? We dispatch in 4-7 days from order confirmation - that is the printing and finishing time at our Surat mill. Courier transit after that depends on your location in India. Free shipping on orders above Rs1,199 within India. Need a different colour, scale or a base not listed? Our team works with 250+ base fabrics. Message us on WhatsApp or email info@clothwala.com - mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

Cream & Dark Brown Swirling Seed Speckle Printed Spandex Fabric - Very dense micro-scale all-over texture of tiny seed-shaped dashes in dark brown and black with gold flecks, flowing in soft swirls on a cream ground and reading as a semi-plain from a distance, printed to order on Poly Spandex and sold by the metre. Available from 1 metre with flexible wholesale minimums, made at our Surat mill and dispatched in 4-7 days. About this print Design 4085 is very dense micro-scale all-over texture of tiny seed-shaped dashes in dark brown and black with gold flecks, flowing in soft swirls on a cream ground and reading as a semi-plain from a distance. The scale is fine (main motif approx. 1/100 of image width). This is an all-over, non-directional print, so pattern pieces can be nested either way up to make the most of the cloth. Measured shades in the artwork run approximately #F7EBDC, #8D7D6F, #B6A697, so trims, linings and thread can be matched directly against those values. Part of the Clothwala 2026 digital-print range. Fabric needed per garment Quantities below are for a standard non-directional layout at 44 inch width. These allow for one-way (directional) cutting - every piece laid the same way, which is how a print like this must be cut. The full chart further down gives the plain figure without that allowance. All quantities are estimates for a standard size; confirm against your own pattern before ordering. Garment Fabric needed Recommended quality Maxi Dress 3.5 - 4.0 m Poly Georgette (70-90 GSM) Dress 3.5 - 4.0 m Poly Crepe (80-95 GSM) Co-ord Set 3.5 - 4.0 m Poly Crepe (80-95 GSM) Kurti 2.75 m Poly Crepe (80-95 GSM) Saree Blouse 1.25 m Poly Japanese Satin (90-110 GSM) Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Men's Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Skirt 2.25 - 2.75 m Viscose Crepe (110-140 GSM) Kids Frock 1.75 m Cotton Cambric (80-110 GSM) Scarf 1.0 - 2.0 m Poly Chiffon (60-80 GSM) Specifications Design code 4085 Print Swirling Seed Speckle - Very dense micro-scale all-over texture of tiny seed-shaped dashes in dark brown and black with gold flecks, flowing in soft swirls on a cream ground and reading as a semi-plain from a distance Ground colour Cream Accent colour Dark Brown Approx. shades #F7EBDC, #8D7D6F, #B6A697 Print scale Fine (main motif approx. 1/100 of image width) Repeat All-over / non-directional Suitable garments Shirt, Blouse, Dress, Men's Shirt, Tunic, Scarf Fabric Poly Spandex Composition Polyester Stretch Stretchable - 7% Lycra (spandex) GSM 200 gsm (this fabric) Width 54 inch Minimum order From 1 metre; flexible wholesale minimums Production Made to order - customisable Dispatch 4-7 days from our Surat mill Other bases The same artwork prints on any of our 17 bases - ask for a quote Printing High-definition digital print, wash-fast Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Full fabric requirement chart This design is printed on Poly Spandex here, and the same artwork prints to order on any of our 17 base cloths. Quantities are at 44 inch width. Plain figures for a standard size, without a directional-cut allowance - add roughly 0.5 m per garment if every piece must be laid the same way. Estimates: confirm against your own pattern before ordering. Fabric needed for 37 garment types - womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 - 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 - 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 - 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 - 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 - 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 - 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 - 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 - 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 - 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 - 3.5 m Poly Crepe one-piece cut Dress 3.0 - 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 - 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 - 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 - 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 - 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 - 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 - 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 - 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 - 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 - 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 - 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 - 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 - 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 - 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4-8 Kids Kurta 1.5 m Poly Muslin age 4-8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 - 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Bulk pricing 6 metres and above - 10% off 25 metres and above - 15% off 50 metres and above - 20% off 100 metres and above - 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Maxi Dress - 3.5 - 4.0 m; Dress - 3.5 - 4.0 m; Co-ord Set - 3.5 - 4.0 m; Kurti - 2.75 m; Saree Blouse - 1.25 m; Shirt - 2.5 - 3.0 m; Men's Shirt - 2.5 - 3.0 m; Skirt - 2.25 - 2.75 m; Kids Frock - 1.75 m; Scarf - 1.0 - 2.0 m (all at 44 inch width). The full chart on this page covers 37 garment types including menswear, kids wear and home furnishing. How should I lay out and cut this print? This is an all-over, non-directional print, so pattern pieces can be nested either way up to save cloth. No special matching is needed at the seams. Which fabric quality suits this print best? This listing is Poly Spandex. If you need the same artwork on a different quality - a crisper shirting, a heavier satin, a viscose - we print it to order on any of our 17 bases. Message us using the WhatsApp button on this page. What colours does this pair with? The ground reads as Cream and the accent as Dark Brown. The measured shades in the artwork are approximately #F7EBDC, #8D7D6F, #B6A697, so you can match trims, linings and thread against those directly. Can I get this in a different colour or scale? Yes. Design 4085 can be recoloured to any Pantone shade, and the print scale can be enlarged or reduced before bulk production, at no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. Our team works with 250+ producible base fabrics in total. Only our 17 highest-volume bases are listed on the website - the full range covers viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp for a specific base. Minimum for an off-catalogue base is 100 metres, and it needs extra lead time. Is this fabric ready stock or made to order? This length is printed to order on Poly Spandex. Nothing is pre-made stock - we print each order specially, so the design can be recoloured, rescaled, or printed on any of our 17 base cloths. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers. Note that 1 unit = 1 metre. How long does delivery take? We dispatch in 4-7 days from order confirmation - that is the printing and finishing time at our Surat mill. Courier transit after that depends on your location in India. Free shipping on orders above Rs1,199 within India. Need a different colour, scale or a base not listed? Our team works with 250+ base fabrics. Message us on WhatsApp or email info@clothwala.com - mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

Beige & Black Corn Cob Rows Printed Spandex Fabric - Horizontal row layout of block-print style black corn cobs with fine cream kernel lines and short gold stems, alternating a row of larger cobs with a row of smaller ones on a beige ground, printed to order on Poly Spandex and sold by the metre. Available from 1 metre with flexible wholesale minimums, made at our Surat mill and dispatched in 4-7 days. About this print Design 4084 is horizontal row layout of block-print style black corn cobs with fine cream kernel lines and short gold stems, alternating a row of larger cobs with a row of smaller ones on a beige ground. The scale is small (main motif approx. 1/25 of image width). The print is directional. All pattern pieces must be cut the same way up, and the design should be matched at centre-front, side seams and sleeve heads. Allow roughly 15-20% extra fabric over a plain print for matching. Measured shades in the artwork run approximately #E8D9BA, #303025, #6C6756, so trims, linings and thread can be matched directly against those values. Part of the Clothwala 2026 digital-print range. Fabric needed per garment Quantities below already include the extra allowance needed to cut a one-way directional print. These allow for one-way (directional) cutting - every piece laid the same way, which is how a print like this must be cut. The full chart further down gives the plain figure without that allowance. All quantities are estimates for a standard size; confirm against your own pattern before ordering. Garment Fabric needed Recommended quality Maxi Dress 3.5 - 4.0 m Poly Georgette (70-90 GSM) Dress 3.5 - 4.0 m Poly Crepe (80-95 GSM) Co-ord Set 3.5 - 4.0 m Poly Crepe (80-95 GSM) Kurti 2.75 m Poly Crepe (80-95 GSM) Saree Blouse 1.25 m Poly Japanese Satin (90-110 GSM) Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Men's Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Skirt 2.25 - 2.75 m Viscose Crepe (110-140 GSM) Kids Frock 1.75 m Cotton Cambric (80-110 GSM) Scarf 1.0 - 2.0 m Poly Chiffon (60-80 GSM) Specifications Design code 4084 Print Corn Cob Rows - Horizontal row layout of block-print style black corn cobs with fine cream kernel lines and short gold stems, alternating a row of larger cobs with a row of smaller ones on a beige ground Ground colour Beige Accent colour Black Approx. shades #E8D9BA, #303025, #6C6756 Print scale Small (main motif approx. 1/25 of image width) Repeat Directional - cut one way Suitable garments Shirt, Men's Shirt, Dress, Skirt, Tunic, Co-ord Set Fabric Poly Spandex Composition Polyester Stretch Stretchable - 7% Lycra (spandex) GSM 200 gsm (this fabric) Width 54 inch Minimum order From 1 metre; flexible wholesale minimums Production Made to order - customisable Dispatch 4-7 days from our Surat mill Other bases The same artwork prints on any of our 17 bases - ask for a quote Printing High-definition digital print, wash-fast Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Full fabric requirement chart This design is printed on Poly Spandex here, and the same artwork prints to order on any of our 17 base cloths. Quantities are at 44 inch width. Plain figures for a standard size, without a directional-cut allowance - add roughly 0.5 m per garment if every piece must be laid the same way. Estimates: confirm against your own pattern before ordering. Fabric needed for 37 garment types - womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 - 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 - 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 - 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 - 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 - 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 - 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 - 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 - 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 - 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 - 3.5 m Poly Crepe one-piece cut Dress 3.0 - 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 - 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 - 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 - 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 - 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 - 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 - 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 - 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 - 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 - 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 - 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 - 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 - 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 - 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4-8 Kids Kurta 1.5 m Poly Muslin age 4-8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 - 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Bulk pricing 6 metres and above - 10% off 25 metres and above - 15% off 50 metres and above - 20% off 100 metres and above - 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Maxi Dress - 3.5 - 4.0 m; Dress - 3.5 - 4.0 m; Co-ord Set - 3.5 - 4.0 m; Kurti - 2.75 m; Saree Blouse - 1.25 m; Shirt - 2.5 - 3.0 m; Men's Shirt - 2.5 - 3.0 m; Skirt - 2.25 - 2.75 m; Kids Frock - 1.75 m; Scarf - 1.0 - 2.0 m (all at 44 inch width, and already uplifted for one-way directional cutting). The full chart on this page covers 37 garment types including menswear, kids wear and home furnishing. How should I lay out and cut this print? This is a directional print, so every pattern piece must be cut the same way up - you cannot turn pieces to save cloth. Match the design at centre-front, at the side seams and across the sleeve head. Budget roughly 15-20% more fabric than a plain or non-directional print, which is why the yardage figures on this page are already uplifted. Which fabric quality suits this print best? This listing is Poly Spandex. If you need the same artwork on a different quality - a crisper shirting, a heavier satin, a viscose - we print it to order on any of our 17 bases. Message us using the WhatsApp button on this page. What colours does this pair with? The ground reads as Beige and the accent as Black. The measured shades in the artwork are approximately #E8D9BA, #303025, #6C6756, so you can match trims, linings and thread against those directly. Can I get this in a different colour or scale? Yes. Design 4084 can be recoloured to any Pantone shade, and the print scale can be enlarged or reduced before bulk production, at no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. Our team works with 250+ producible base fabrics in total. Only our 17 highest-volume bases are listed on the website - the full range covers viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp for a specific base. Minimum for an off-catalogue base is 100 metres, and it needs extra lead time. Is this fabric ready stock or made to order? This length is printed to order on Poly Spandex. Nothing is pre-made stock - we print each order specially, so the design can be recoloured, rescaled, or printed on any of our 17 base cloths. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers. Note that 1 unit = 1 metre. How long does delivery take? We dispatch in 4-7 days from order confirmation - that is the printing and finishing time at our Surat mill. Courier transit after that depends on your location in India. Free shipping on orders above Rs1,199 within India. Need a different colour, scale or a base not listed? Our team works with 250+ base fabrics. Message us on WhatsApp or email info@clothwala.com - mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

Cream & Black Scribble Trees & Dots Printed Spandex Fabric - All-over one-way print of black scribble-filled trees, tall leaves and bark strips set among blocks of hand-drawn dots, dashes and small squares, with mustard circles, on a cream ground, printed to order on Poly Spandex and sold by the metre. Available from 1 metre with flexible wholesale minimums, made at our Surat mill and dispatched in 4-7 days. About this print Design 4083 is all-over one-way print of black scribble-filled trees, tall leaves and bark strips set among blocks of hand-drawn dots, dashes and small squares, with mustard circles, on a cream ground. The scale is small (main motif approx. 1/17 of image width). The print is directional. All pattern pieces must be cut the same way up, and the design should be matched at centre-front, side seams and sleeve heads. Allow roughly 15-20% extra fabric over a plain print for matching. Measured shades in the artwork run approximately #F0F0DD, #242421, #DCB35B, so trims, linings and thread can be matched directly against those values. One of the designs in the Clothwala 2026 polka dot collection. Fabric needed per garment Quantities below already include the extra allowance needed to cut a one-way directional print. These allow for one-way (directional) cutting - every piece laid the same way, which is how a print like this must be cut. The full chart further down gives the plain figure without that allowance. All quantities are estimates for a standard size; confirm against your own pattern before ordering. Garment Fabric needed Recommended quality Maxi Dress 3.5 - 4.0 m Poly Georgette (70-90 GSM) Dress 3.5 - 4.0 m Poly Crepe (80-95 GSM) Co-ord Set 3.5 - 4.0 m Poly Crepe (80-95 GSM) Kurti 2.75 m Poly Crepe (80-95 GSM) Saree Blouse 1.25 m Poly Japanese Satin (90-110 GSM) Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Men's Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Skirt 2.25 - 2.75 m Viscose Crepe (110-140 GSM) Kids Frock 1.75 m Cotton Cambric (80-110 GSM) Scarf 1.0 - 2.0 m Poly Chiffon (60-80 GSM) Specifications Design code 4083 Print Scribble Trees & Dots - All-over one-way print of black scribble-filled trees, tall leaves and bark strips set among blocks of hand-drawn dots, dashes and small squares, with mustard circles, on a cream ground Ground colour Cream Accent colour Black Approx. shades #F0F0DD, #242421, #DCB35B Print scale Small (main motif approx. 1/17 of image width) Repeat Directional - cut one way Suitable garments Shirt, Dress, Blouse, Kids' Dress, Skirt, Co-ord Set Fabric Poly Spandex Composition Polyester Stretch Stretchable - 7% Lycra (spandex) GSM 200 gsm (this fabric) Width 54 inch Minimum order From 1 metre; flexible wholesale minimums Production Made to order - customisable Dispatch 4-7 days from our Surat mill Other bases The same artwork prints on any of our 17 bases - ask for a quote Printing High-definition digital print, wash-fast Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Full fabric requirement chart This design is printed on Poly Spandex here, and the same artwork prints to order on any of our 17 base cloths. Quantities are at 44 inch width. Plain figures for a standard size, without a directional-cut allowance - add roughly 0.5 m per garment if every piece must be laid the same way. Estimates: confirm against your own pattern before ordering. Fabric needed for 37 garment types - womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 - 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 - 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 - 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 - 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 - 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 - 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 - 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 - 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 - 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 - 3.5 m Poly Crepe one-piece cut Dress 3.0 - 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 - 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 - 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 - 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 - 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 - 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 - 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 - 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 - 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 - 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 - 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 - 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 - 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 - 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4-8 Kids Kurta 1.5 m Poly Muslin age 4-8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 - 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Bulk pricing 6 metres and above - 10% off 25 metres and above - 15% off 50 metres and above - 20% off 100 metres and above - 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Maxi Dress - 3.5 - 4.0 m; Dress - 3.5 - 4.0 m; Co-ord Set - 3.5 - 4.0 m; Kurti - 2.75 m; Saree Blouse - 1.25 m; Shirt - 2.5 - 3.0 m; Men's Shirt - 2.5 - 3.0 m; Skirt - 2.25 - 2.75 m; Kids Frock - 1.75 m; Scarf - 1.0 - 2.0 m (all at 44 inch width, and already uplifted for one-way directional cutting). The full chart on this page covers 37 garment types including menswear, kids wear and home furnishing. What size are the dots? Small (main motif approx. 1/17 of image width) dot set in columns over the ground. This is a geometric print, so it carries a strong, graphic line down the body of a garment. How should I lay out and cut this print? This is a directional print, so every pattern piece must be cut the same way up - you cannot turn pieces to save cloth. Match the design at centre-front, at the side seams and across the sleeve head. Budget roughly 15-20% more fabric than a plain or non-directional print, which is why the yardage figures on this page are already uplifted. Which fabric quality suits this print best? This listing is Poly Spandex. If you need the same artwork on a different quality - a crisper shirting, a heavier satin, a viscose - we print it to order on any of our 17 bases. Message us using the WhatsApp button on this page. Is polka dot still a current trend? Yes - polka dot is one of the few prints that never fully leaves the range, and it runs strongly for 2026-27 across resort, shirting and womenswear. It is a safe repeat-order print. What colours does this pair with? The ground reads as Cream and the accent as Black. The measured shades in the artwork are approximately #F0F0DD, #242421, #DCB35B, so you can match trims, linings and thread against those directly. Can I get this in a different colour or scale? Yes. Design 4083 can be recoloured to any Pantone shade, and the print scale can be enlarged or reduced before bulk production, at no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. Our team works with 250+ producible base fabrics in total. Only our 17 highest-volume bases are listed on the website - the full range covers viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp for a specific base. Minimum for an off-catalogue base is 100 metres, and it needs extra lead time. Is this fabric ready stock or made to order? This length is printed to order on Poly Spandex. Nothing is pre-made stock - we print each order specially, so the design can be recoloured, rescaled, or printed on any of our 17 base cloths. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers. Note that 1 unit = 1 metre. How long does delivery take? We dispatch in 4-7 days from order confirmation - that is the printing and finishing time at our Surat mill. Courier transit after that depends on your location in India. Free shipping on orders above Rs1,199 within India. Need a different colour, scale or a base not listed? Our team works with 250+ base fabrics. Message us on WhatsApp or email info@clothwala.com - mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

Cream & Black Sketch Leaves & Checks Printed Spandex Fabric - Busy small-scale print of upright black leaves, hatched feather shapes and grass tufts mixed with small check patches, dot blocks and splatter, over beige washes and small yellow touches on a cream ground, printed to order on Poly Spandex and sold by the metre. Available from 1 metre with flexible wholesale minimums, made at our Surat mill and dispatched in 4-7 days. About this print Design 4082 is busy small-scale print of upright black leaves, hatched feather shapes and grass tufts mixed with small check patches, dot blocks and splatter, over beige washes and small yellow touches on a cream ground. The scale is small (main motif approx. 1/25 of image width). The print is directional. All pattern pieces must be cut the same way up, and the design should be matched at centre-front, side seams and sleeve heads. Allow roughly 15-20% extra fabric over a plain print for matching. Measured shades in the artwork run approximately #EDEDE1, #1C1A15, #ADA99A, so trims, linings and thread can be matched directly against those values. Part of the Clothwala 2026 digital-print range. Fabric needed per garment Quantities below already include the extra allowance needed to cut a one-way directional print. These allow for one-way (directional) cutting - every piece laid the same way, which is how a print like this must be cut. The full chart further down gives the plain figure without that allowance. All quantities are estimates for a standard size; confirm against your own pattern before ordering. Garment Fabric needed Recommended quality Maxi Dress 3.5 - 4.0 m Poly Georgette (70-90 GSM) Dress 3.5 - 4.0 m Poly Crepe (80-95 GSM) Co-ord Set 3.5 - 4.0 m Poly Crepe (80-95 GSM) Kurti 2.75 m Poly Crepe (80-95 GSM) Saree Blouse 1.25 m Poly Japanese Satin (90-110 GSM) Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Men's Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Skirt 2.25 - 2.75 m Viscose Crepe (110-140 GSM) Kids Frock 1.75 m Cotton Cambric (80-110 GSM) Scarf 1.0 - 2.0 m Poly Chiffon (60-80 GSM) Specifications Design code 4082 Print Sketch Leaves & Checks - Busy small-scale print of upright black leaves, hatched feather shapes and grass tufts mixed with small check patches, dot blocks and splatter, over beige washes and small yellow touches on a cream ground Ground colour Cream Accent colour Black Approx. shades #EDEDE1, #1C1A15, #ADA99A Print scale Small (main motif approx. 1/25 of image width) Repeat Directional - cut one way Suitable garments Shirt, Dress, Blouse, Tunic, Skirt, Co-ord Set Fabric Poly Spandex Composition Polyester Stretch Stretchable - 7% Lycra (spandex) GSM 200 gsm (this fabric) Width 54 inch Minimum order From 1 metre; flexible wholesale minimums Production Made to order - customisable Dispatch 4-7 days from our Surat mill Other bases The same artwork prints on any of our 17 bases - ask for a quote Printing High-definition digital print, wash-fast Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Full fabric requirement chart This design is printed on Poly Spandex here, and the same artwork prints to order on any of our 17 base cloths. Quantities are at 44 inch width. Plain figures for a standard size, without a directional-cut allowance - add roughly 0.5 m per garment if every piece must be laid the same way. Estimates: confirm against your own pattern before ordering. Fabric needed for 37 garment types - womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 - 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 - 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 - 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 - 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 - 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 - 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 - 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 - 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 - 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 - 3.5 m Poly Crepe one-piece cut Dress 3.0 - 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 - 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 - 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 - 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 - 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 - 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 - 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 - 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 - 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 - 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 - 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 - 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 - 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 - 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4-8 Kids Kurta 1.5 m Poly Muslin age 4-8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 - 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Bulk pricing 6 metres and above - 10% off 25 metres and above - 15% off 50 metres and above - 20% off 100 metres and above - 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Maxi Dress - 3.5 - 4.0 m; Dress - 3.5 - 4.0 m; Co-ord Set - 3.5 - 4.0 m; Kurti - 2.75 m; Saree Blouse - 1.25 m; Shirt - 2.5 - 3.0 m; Men's Shirt - 2.5 - 3.0 m; Skirt - 2.25 - 2.75 m; Kids Frock - 1.75 m; Scarf - 1.0 - 2.0 m (all at 44 inch width, and already uplifted for one-way directional cutting). The full chart on this page covers 37 garment types including menswear, kids wear and home furnishing. How should I lay out and cut this print? This is a directional print, so every pattern piece must be cut the same way up - you cannot turn pieces to save cloth. Match the design at centre-front, at the side seams and across the sleeve head. Budget roughly 15-20% more fabric than a plain or non-directional print, which is why the yardage figures on this page are already uplifted. Which fabric quality suits this print best? This listing is Poly Spandex. If you need the same artwork on a different quality - a crisper shirting, a heavier satin, a viscose - we print it to order on any of our 17 bases. Message us using the WhatsApp button on this page. What colours does this pair with? The ground reads as Cream and the accent as Black. The measured shades in the artwork are approximately #EDEDE1, #1C1A15, #ADA99A, so you can match trims, linings and thread against those directly. Can I get this in a different colour or scale? Yes. Design 4082 can be recoloured to any Pantone shade, and the print scale can be enlarged or reduced before bulk production, at no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. Our team works with 250+ producible base fabrics in total. Only our 17 highest-volume bases are listed on the website - the full range covers viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp for a specific base. Minimum for an off-catalogue base is 100 metres, and it needs extra lead time. Is this fabric ready stock or made to order? This length is printed to order on Poly Spandex. Nothing is pre-made stock - we print each order specially, so the design can be recoloured, rescaled, or printed on any of our 17 base cloths. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers. Note that 1 unit = 1 metre. How long does delivery take? We dispatch in 4-7 days from order confirmation - that is the printing and finishing time at our Surat mill. Courier transit after that depends on your location in India. Free shipping on orders above Rs1,199 within India. Need a different colour, scale or a base not listed? Our team works with 250+ base fabrics. Message us on WhatsApp or email info@clothwala.com - mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

White & Mustard Scandi Leaves & Stems Printed Spandex Fabric - Small-scale one-way print of flat folk-style leaves, fern stems, tiny trees and round seed heads in black and mustard with dot and dash fillers, evenly spaced on a white ground, printed to order on Poly Spandex and sold by the metre. Available from 1 metre with flexible wholesale minimums, made at our Surat mill and dispatched in 4-7 days. About this print Design 4081 is small-scale one-way print of flat folk-style leaves, fern stems, tiny trees and round seed heads in black and mustard with dot and dash fillers, evenly spaced on a white ground. The scale is small (main motif approx. 1/25 of image width). The print is directional. All pattern pieces must be cut the same way up, and the design should be matched at centre-front, side seams and sleeve heads. Allow roughly 15-20% extra fabric over a plain print for matching. Measured shades in the artwork run approximately #F9F9F6, #211C17, #BF8819, so trims, linings and thread can be matched directly against those values. Part of the Clothwala 2026 digital-print range. Fabric needed per garment Quantities below already include the extra allowance needed to cut a one-way directional print. These allow for one-way (directional) cutting - every piece laid the same way, which is how a print like this must be cut. The full chart further down gives the plain figure without that allowance. All quantities are estimates for a standard size; confirm against your own pattern before ordering. Garment Fabric needed Recommended quality Maxi Dress 3.5 - 4.0 m Poly Georgette (70-90 GSM) Dress 3.5 - 4.0 m Poly Crepe (80-95 GSM) Co-ord Set 3.5 - 4.0 m Poly Crepe (80-95 GSM) Kurti 2.75 m Poly Crepe (80-95 GSM) Saree Blouse 1.25 m Poly Japanese Satin (90-110 GSM) Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Men's Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Skirt 2.25 - 2.75 m Viscose Crepe (110-140 GSM) Kids Frock 1.75 m Cotton Cambric (80-110 GSM) Scarf 1.0 - 2.0 m Poly Chiffon (60-80 GSM) Specifications Design code 4081 Print Scandi Leaves & Stems - Small-scale one-way print of flat folk-style leaves, fern stems, tiny trees and round seed heads in black and mustard with dot and dash fillers, evenly spaced on a white ground Ground colour White Accent colour Mustard Approx. shades #F9F9F6, #211C17, #BF8819 Print scale Small (main motif approx. 1/25 of image width) Repeat Directional - cut one way Suitable garments Shirt, Dress, Blouse, Kids' Dress, Nightwear Set, Skirt Fabric Poly Spandex Composition Polyester Stretch Stretchable - 7% Lycra (spandex) GSM 200 gsm (this fabric) Width 54 inch Minimum order From 1 metre; flexible wholesale minimums Production Made to order - customisable Dispatch 4-7 days from our Surat mill Other bases The same artwork prints on any of our 17 bases - ask for a quote Printing High-definition digital print, wash-fast Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Full fabric requirement chart This design is printed on Poly Spandex here, and the same artwork prints to order on any of our 17 base cloths. Quantities are at 44 inch width. Plain figures for a standard size, without a directional-cut allowance - add roughly 0.5 m per garment if every piece must be laid the same way. Estimates: confirm against your own pattern before ordering. Fabric needed for 37 garment types - womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 - 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 - 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 - 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 - 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 - 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 - 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 - 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 - 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 - 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 - 3.5 m Poly Crepe one-piece cut Dress 3.0 - 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 - 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 - 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 - 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 - 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 - 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 - 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 - 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 - 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 - 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 - 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 - 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 - 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 - 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4-8 Kids Kurta 1.5 m Poly Muslin age 4-8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 - 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Bulk pricing 6 metres and above - 10% off 25 metres and above - 15% off 50 metres and above - 20% off 100 metres and above - 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Maxi Dress - 3.5 - 4.0 m; Dress - 3.5 - 4.0 m; Co-ord Set - 3.5 - 4.0 m; Kurti - 2.75 m; Saree Blouse - 1.25 m; Shirt - 2.5 - 3.0 m; Men's Shirt - 2.5 - 3.0 m; Skirt - 2.25 - 2.75 m; Kids Frock - 1.75 m; Scarf - 1.0 - 2.0 m (all at 44 inch width, and already uplifted for one-way directional cutting). The full chart on this page covers 37 garment types including menswear, kids wear and home furnishing. How should I lay out and cut this print? This is a directional print, so every pattern piece must be cut the same way up - you cannot turn pieces to save cloth. Match the design at centre-front, at the side seams and across the sleeve head. Budget roughly 15-20% more fabric than a plain or non-directional print, which is why the yardage figures on this page are already uplifted. Which fabric quality suits this print best? This listing is Poly Spandex. If you need the same artwork on a different quality - a crisper shirting, a heavier satin, a viscose - we print it to order on any of our 17 bases. Message us using the WhatsApp button on this page. What colours does this pair with? The ground reads as White and the accent as Mustard. The measured shades in the artwork are approximately #F9F9F6, #211C17, #BF8819, so you can match trims, linings and thread against those directly. Can I get this in a different colour or scale? Yes. Design 4081 can be recoloured to any Pantone shade, and the print scale can be enlarged or reduced before bulk production, at no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. Our team works with 250+ producible base fabrics in total. Only our 17 highest-volume bases are listed on the website - the full range covers viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp for a specific base. Minimum for an off-catalogue base is 100 metres, and it needs extra lead time. Is this fabric ready stock or made to order? This length is printed to order on Poly Spandex. Nothing is pre-made stock - we print each order specially, so the design can be recoloured, rescaled, or printed on any of our 17 base cloths. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers. Note that 1 unit = 1 metre. How long does delivery take? We dispatch in 4-7 days from order confirmation - that is the printing and finishing time at our Surat mill. Courier transit after that depends on your location in India. Free shipping on orders above Rs1,199 within India. Need a different colour, scale or a base not listed? Our team works with 250+ base fabrics. Message us on WhatsApp or email info@clothwala.com - mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

Cream & Mustard Yellow Dotted Brush Dabs Printed Spandex Fabric - Dense all-over abstract of vertical oval brush dabs in mustard yellow, black and peach, some overprinted with contrast dots, between columns of black dots and yellow streaks on a cream ground, printed to order on Poly Spandex and sold by the metre. Available from 1 metre with flexible wholesale minimums, made at our Surat mill and dispatched in 4-7 days. About this print Design 4080 is dense all-over abstract of vertical oval brush dabs in mustard yellow, black and peach, some overprinted with contrast dots, between columns of black dots and yellow streaks on a cream ground. The scale is small (main motif approx. 1/20 of image width). This is an all-over, non-directional print, so pattern pieces can be nested either way up to make the most of the cloth. Measured shades in the artwork run approximately #F3ECD8, #EBBE35, #312F2A, so trims, linings and thread can be matched directly against those values. One of the designs in the Clothwala 2026 polka dot collection. Fabric needed per garment Quantities below are for a standard non-directional layout at 44 inch width. These allow for one-way (directional) cutting - every piece laid the same way, which is how a print like this must be cut. The full chart further down gives the plain figure without that allowance. All quantities are estimates for a standard size; confirm against your own pattern before ordering. Garment Fabric needed Recommended quality Maxi Dress 3.5 - 4.0 m Poly Georgette (70-90 GSM) Dress 3.5 - 4.0 m Poly Crepe (80-95 GSM) Co-ord Set 3.5 - 4.0 m Poly Crepe (80-95 GSM) Kurti 2.75 m Poly Crepe (80-95 GSM) Saree Blouse 1.25 m Poly Japanese Satin (90-110 GSM) Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Men's Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Skirt 2.25 - 2.75 m Viscose Crepe (110-140 GSM) Kids Frock 1.75 m Cotton Cambric (80-110 GSM) Scarf 1.0 - 2.0 m Poly Chiffon (60-80 GSM) Specifications Design code 4080 Print Dotted Brush Dabs - Dense all-over abstract of vertical oval brush dabs in mustard yellow, black and peach, some overprinted with contrast dots, between columns of black dots and yellow streaks on a cream ground Ground colour Cream Accent colour Mustard Yellow Approx. shades #F3ECD8, #EBBE35, #312F2A Print scale Small (main motif approx. 1/20 of image width) Repeat All-over / non-directional Suitable garments Dress, Shirt, Co-ord Set, Skirt, Blouse, Kaftan Fabric Poly Spandex Composition Polyester Stretch Stretchable - 7% Lycra (spandex) GSM 200 gsm (this fabric) Width 54 inch Minimum order From 1 metre; flexible wholesale minimums Production Made to order - customisable Dispatch 4-7 days from our Surat mill Other bases The same artwork prints on any of our 17 bases - ask for a quote Printing High-definition digital print, wash-fast Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Full fabric requirement chart This design is printed on Poly Spandex here, and the same artwork prints to order on any of our 17 base cloths. Quantities are at 44 inch width. Plain figures for a standard size, without a directional-cut allowance - add roughly 0.5 m per garment if every piece must be laid the same way. Estimates: confirm against your own pattern before ordering. Fabric needed for 37 garment types - womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 - 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 - 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 - 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 - 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 - 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 - 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 - 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 - 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 - 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 - 3.5 m Poly Crepe one-piece cut Dress 3.0 - 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 - 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 - 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 - 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 - 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 - 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 - 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 - 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 - 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 - 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 - 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 - 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 - 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 - 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4-8 Kids Kurta 1.5 m Poly Muslin age 4-8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 - 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Bulk pricing 6 metres and above - 10% off 25 metres and above - 15% off 50 metres and above - 20% off 100 metres and above - 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Maxi Dress - 3.5 - 4.0 m; Dress - 3.5 - 4.0 m; Co-ord Set - 3.5 - 4.0 m; Kurti - 2.75 m; Saree Blouse - 1.25 m; Shirt - 2.5 - 3.0 m; Men's Shirt - 2.5 - 3.0 m; Skirt - 2.25 - 2.75 m; Kids Frock - 1.75 m; Scarf - 1.0 - 2.0 m (all at 44 inch width). The full chart on this page covers 37 garment types including menswear, kids wear and home furnishing. What size are the dots? Small (main motif approx. 1/20 of image width) dot set in columns over the ground. This is a geometric print, so it carries a strong, graphic line down the body of a garment. How should I lay out and cut this print? This is an all-over, non-directional print, so pattern pieces can be nested either way up to save cloth. No special matching is needed at the seams. Which fabric quality suits this print best? This listing is Poly Spandex. If you need the same artwork on a different quality - a crisper shirting, a heavier satin, a viscose - we print it to order on any of our 17 bases. Message us using the WhatsApp button on this page. Is polka dot still a current trend? Yes - polka dot is one of the few prints that never fully leaves the range, and it runs strongly for 2026-27 across resort, shirting and womenswear. It is a safe repeat-order print. What colours does this pair with? The ground reads as Cream and the accent as Mustard Yellow. The measured shades in the artwork are approximately #F3ECD8, #EBBE35, #312F2A, so you can match trims, linings and thread against those directly. Can I get this in a different colour or scale? Yes. Design 4080 can be recoloured to any Pantone shade, and the print scale can be enlarged or reduced before bulk production, at no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. Our team works with 250+ producible base fabrics in total. Only our 17 highest-volume bases are listed on the website - the full range covers viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp for a specific base. Minimum for an off-catalogue base is 100 metres, and it needs extra lead time. Is this fabric ready stock or made to order? This length is printed to order on Poly Spandex. Nothing is pre-made stock - we print each order specially, so the design can be recoloured, rescaled, or printed on any of our 17 base cloths. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers. Note that 1 unit = 1 metre. How long does delivery take? We dispatch in 4-7 days from order confirmation - that is the printing and finishing time at our Surat mill. Courier transit after that depends on your location in India. Free shipping on orders above Rs1,199 within India. Need a different colour, scale or a base not listed? Our team works with 250+ base fabrics. Message us on WhatsApp or email info@clothwala.com - mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

Cream & Black Patterned Vertical Leaves Printed Spandex Fabric - Dense small-scale all-over print of slim vertical leaf shapes filled with dots, veins and stripes, mostly black and charcoal with mustard and brown ones and dot clusters, on a cream ground, printed to order on Poly Spandex and sold by the metre. Available from 1 metre with flexible wholesale minimums, made at our Surat mill and dispatched in 4-7 days. About this print Design 4079 is dense small-scale all-over print of slim vertical leaf shapes filled with dots, veins and stripes, mostly black and charcoal with mustard and brown ones and dot clusters, on a cream ground. The scale is fine (main motif approx. 1/33 of image width). This is an all-over, non-directional print, so pattern pieces can be nested either way up to make the most of the cloth. Measured shades in the artwork run approximately #EDE5D4, #38352D, #E4B75A, so trims, linings and thread can be matched directly against those values. Part of the Clothwala 2026 digital-print range. Fabric needed per garment Quantities below are for a standard non-directional layout at 44 inch width. These allow for one-way (directional) cutting - every piece laid the same way, which is how a print like this must be cut. The full chart further down gives the plain figure without that allowance. All quantities are estimates for a standard size; confirm against your own pattern before ordering. Garment Fabric needed Recommended quality Maxi Dress 3.5 - 4.0 m Poly Georgette (70-90 GSM) Dress 3.5 - 4.0 m Poly Crepe (80-95 GSM) Co-ord Set 3.5 - 4.0 m Poly Crepe (80-95 GSM) Kurti 2.75 m Poly Crepe (80-95 GSM) Saree Blouse 1.25 m Poly Japanese Satin (90-110 GSM) Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Men's Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Skirt 2.25 - 2.75 m Viscose Crepe (110-140 GSM) Kids Frock 1.75 m Cotton Cambric (80-110 GSM) Scarf 1.0 - 2.0 m Poly Chiffon (60-80 GSM) Specifications Design code 4079 Print Patterned Vertical Leaves - Dense small-scale all-over print of slim vertical leaf shapes filled with dots, veins and stripes, mostly black and charcoal with mustard and brown ones and dot clusters, on a cream ground Ground colour Cream Accent colour Black Approx. shades #EDE5D4, #38352D, #E4B75A Print scale Fine (main motif approx. 1/33 of image width) Repeat All-over / non-directional Suitable garments Shirt, Dress, Kurti, Tunic, Skirt, Co-ord Set Fabric Poly Spandex Composition Polyester Stretch Stretchable - 7% Lycra (spandex) GSM 200 gsm (this fabric) Width 54 inch Minimum order From 1 metre; flexible wholesale minimums Production Made to order - customisable Dispatch 4-7 days from our Surat mill Other bases The same artwork prints on any of our 17 bases - ask for a quote Printing High-definition digital print, wash-fast Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Full fabric requirement chart This design is printed on Poly Spandex here, and the same artwork prints to order on any of our 17 base cloths. Quantities are at 44 inch width. Plain figures for a standard size, without a directional-cut allowance - add roughly 0.5 m per garment if every piece must be laid the same way. Estimates: confirm against your own pattern before ordering. Fabric needed for 37 garment types - womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 - 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 - 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 - 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 - 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 - 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 - 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 - 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 - 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 - 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 - 3.5 m Poly Crepe one-piece cut Dress 3.0 - 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 - 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 - 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 - 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 - 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 - 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 - 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 - 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 - 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 - 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 - 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 - 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 - 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 - 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4-8 Kids Kurta 1.5 m Poly Muslin age 4-8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 - 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Bulk pricing 6 metres and above - 10% off 25 metres and above - 15% off 50 metres and above - 20% off 100 metres and above - 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Maxi Dress - 3.5 - 4.0 m; Dress - 3.5 - 4.0 m; Co-ord Set - 3.5 - 4.0 m; Kurti - 2.75 m; Saree Blouse - 1.25 m; Shirt - 2.5 - 3.0 m; Men's Shirt - 2.5 - 3.0 m; Skirt - 2.25 - 2.75 m; Kids Frock - 1.75 m; Scarf - 1.0 - 2.0 m (all at 44 inch width). The full chart on this page covers 37 garment types including menswear, kids wear and home furnishing. How should I lay out and cut this print? This is an all-over, non-directional print, so pattern pieces can be nested either way up to save cloth. No special matching is needed at the seams. Which fabric quality suits this print best? This listing is Poly Spandex. If you need the same artwork on a different quality - a crisper shirting, a heavier satin, a viscose - we print it to order on any of our 17 bases. Message us using the WhatsApp button on this page. What colours does this pair with? The ground reads as Cream and the accent as Black. The measured shades in the artwork are approximately #EDE5D4, #38352D, #E4B75A, so you can match trims, linings and thread against those directly. Can I get this in a different colour or scale? Yes. Design 4079 can be recoloured to any Pantone shade, and the print scale can be enlarged or reduced before bulk production, at no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. Our team works with 250+ producible base fabrics in total. Only our 17 highest-volume bases are listed on the website - the full range covers viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp for a specific base. Minimum for an off-catalogue base is 100 metres, and it needs extra lead time. Is this fabric ready stock or made to order? This length is printed to order on Poly Spandex. Nothing is pre-made stock - we print each order specially, so the design can be recoloured, rescaled, or printed on any of our 17 base cloths. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers. Note that 1 unit = 1 metre. How long does delivery take? We dispatch in 4-7 days from order confirmation - that is the printing and finishing time at our Surat mill. Courier transit after that depends on your location in India. Free shipping on orders above Rs1,199 within India. Need a different colour, scale or a base not listed? Our team works with 250+ base fabrics. Message us on WhatsApp or email info@clothwala.com - mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

Beige & Black Corn Cobs Printed Spandex Fabric - Spaced one-way print of small hand-painted black corn cobs in mixed lengths dotted with cream kernels, some topped with mustard or olive tufts, with small black specks between on a beige ground, printed to order on Poly Spandex and sold by the metre. Available from 1 metre with flexible wholesale minimums, made at our Surat mill and dispatched in 4-7 days. About this print Design 4078 is spaced one-way print of small hand-painted black corn cobs in mixed lengths dotted with cream kernels, some topped with mustard or olive tufts, with small black specks between on a beige ground. The scale is fine (main motif approx. 1/29 of image width). The print is directional. All pattern pieces must be cut the same way up, and the design should be matched at centre-front, side seams and sleeve heads. Allow roughly 15-20% extra fabric over a plain print for matching. Measured shades in the artwork run approximately #E6DAC2, #26221D, #595144, so trims, linings and thread can be matched directly against those values. Part of the Clothwala 2026 digital-print range. Fabric needed per garment Quantities below already include the extra allowance needed to cut a one-way directional print. These allow for one-way (directional) cutting - every piece laid the same way, which is how a print like this must be cut. The full chart further down gives the plain figure without that allowance. All quantities are estimates for a standard size; confirm against your own pattern before ordering. Garment Fabric needed Recommended quality Maxi Dress 3.5 - 4.0 m Poly Georgette (70-90 GSM) Dress 3.5 - 4.0 m Poly Crepe (80-95 GSM) Co-ord Set 3.5 - 4.0 m Poly Crepe (80-95 GSM) Kurti 2.75 m Poly Crepe (80-95 GSM) Saree Blouse 1.25 m Poly Japanese Satin (90-110 GSM) Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Men's Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Skirt 2.25 - 2.75 m Viscose Crepe (110-140 GSM) Kids Frock 1.75 m Cotton Cambric (80-110 GSM) Scarf 1.0 - 2.0 m Poly Chiffon (60-80 GSM) Specifications Design code 4078 Print Black Corn Cobs - Spaced one-way print of small hand-painted black corn cobs in mixed lengths dotted with cream kernels, some topped with mustard or olive tufts, with small black specks between on a beige ground Ground colour Beige Accent colour Black Approx. shades #E6DAC2, #26221D, #595144 Print scale Fine (main motif approx. 1/29 of image width) Repeat Directional - cut one way Suitable garments Shirt, Dress, Blouse, Kids' Dress, Nightwear Set, Skirt Fabric Poly Spandex Composition Polyester Stretch Stretchable - 7% Lycra (spandex) GSM 200 gsm (this fabric) Width 54 inch Minimum order From 1 metre; flexible wholesale minimums Production Made to order - customisable Dispatch 4-7 days from our Surat mill Other bases The same artwork prints on any of our 17 bases - ask for a quote Printing High-definition digital print, wash-fast Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Full fabric requirement chart This design is printed on Poly Spandex here, and the same artwork prints to order on any of our 17 base cloths. Quantities are at 44 inch width. Plain figures for a standard size, without a directional-cut allowance - add roughly 0.5 m per garment if every piece must be laid the same way. Estimates: confirm against your own pattern before ordering. Fabric needed for 37 garment types - womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 - 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 - 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 - 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 - 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 - 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 - 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 - 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 - 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 - 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 - 3.5 m Poly Crepe one-piece cut Dress 3.0 - 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 - 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 - 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 - 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 - 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 - 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 - 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 - 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 - 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 - 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 - 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 - 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 - 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 - 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4-8 Kids Kurta 1.5 m Poly Muslin age 4-8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 - 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Bulk pricing 6 metres and above - 10% off 25 metres and above - 15% off 50 metres and above - 20% off 100 metres and above - 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Maxi Dress - 3.5 - 4.0 m; Dress - 3.5 - 4.0 m; Co-ord Set - 3.5 - 4.0 m; Kurti - 2.75 m; Saree Blouse - 1.25 m; Shirt - 2.5 - 3.0 m; Men's Shirt - 2.5 - 3.0 m; Skirt - 2.25 - 2.75 m; Kids Frock - 1.75 m; Scarf - 1.0 - 2.0 m (all at 44 inch width, and already uplifted for one-way directional cutting). The full chart on this page covers 37 garment types including menswear, kids wear and home furnishing. How should I lay out and cut this print? This is a directional print, so every pattern piece must be cut the same way up - you cannot turn pieces to save cloth. Match the design at centre-front, at the side seams and across the sleeve head. Budget roughly 15-20% more fabric than a plain or non-directional print, which is why the yardage figures on this page are already uplifted. Which fabric quality suits this print best? This listing is Poly Spandex. If you need the same artwork on a different quality - a crisper shirting, a heavier satin, a viscose - we print it to order on any of our 17 bases. Message us using the WhatsApp button on this page. What colours does this pair with? The ground reads as Beige and the accent as Black. The measured shades in the artwork are approximately #E6DAC2, #26221D, #595144, so you can match trims, linings and thread against those directly. Can I get this in a different colour or scale? Yes. Design 4078 can be recoloured to any Pantone shade, and the print scale can be enlarged or reduced before bulk production, at no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. Our team works with 250+ producible base fabrics in total. Only our 17 highest-volume bases are listed on the website - the full range covers viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp for a specific base. Minimum for an off-catalogue base is 100 metres, and it needs extra lead time. Is this fabric ready stock or made to order? This length is printed to order on Poly Spandex. Nothing is pre-made stock - we print each order specially, so the design can be recoloured, rescaled, or printed on any of our 17 base cloths. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers. Note that 1 unit = 1 metre. How long does delivery take? We dispatch in 4-7 days from order confirmation - that is the printing and finishing time at our Surat mill. Courier transit after that depends on your location in India. Free shipping on orders above Rs1,199 within India. Need a different colour, scale or a base not listed? Our team works with 250+ base fabrics. Message us on WhatsApp or email info@clothwala.com - mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less