Lycra & Stretch Fabric - Wholesale

Beige & Golden Yellow Vintage Corn Cobs Printed Spandex Fabric - Medium-scale one-way repeat of shaded botanical-illustration corn cobs in golden yellow with black and olive husks, pale leafy stems and small red fruits, set in a half-drop layout on a beige ground, printed to order on Poly Spandex and sold by the metre. Available from 1 metre with flexible wholesale minimums, made at our Surat mill and dispatched in 4-7 days. About this print Design 4077 is medium-scale one-way repeat of shaded botanical-illustration corn cobs in golden yellow with black and olive husks, pale leafy stems and small red fruits, set in a half-drop layout on a beige ground. The scale is medium (main motif approx. 1/9 of image width). The print is directional. All pattern pieces must be cut the same way up, and the design should be matched at centre-front, side seams and sleeve heads. Allow roughly 15-20% extra fabric over a plain print for matching. Measured shades in the artwork run approximately #E8D7C5, #C59154, #403828, #C7AE7C, so trims, linings and thread can be matched directly against those values. Part of the Clothwala 2026 digital-print range. Fabric needed per garment Quantities below already include the extra allowance needed to cut a one-way directional print. These allow for one-way (directional) cutting - every piece laid the same way, which is how a print like this must be cut. The full chart further down gives the plain figure without that allowance. All quantities are estimates for a standard size; confirm against your own pattern before ordering. Garment Fabric needed Recommended quality Maxi Dress 3.5 - 4.0 m Poly Georgette (70-90 GSM) Dress 3.5 - 4.0 m Poly Crepe (80-95 GSM) Co-ord Set 3.5 - 4.0 m Poly Crepe (80-95 GSM) Kurti 2.75 m Poly Crepe (80-95 GSM) Saree Blouse 1.25 m Poly Japanese Satin (90-110 GSM) Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Men's Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Skirt 2.25 - 2.75 m Viscose Crepe (110-140 GSM) Kids Frock 1.75 m Cotton Cambric (80-110 GSM) Scarf 1.0 - 2.0 m Poly Chiffon (60-80 GSM) Specifications Design code 4077 Print Vintage Corn Cobs - Medium-scale one-way repeat of shaded botanical-illustration corn cobs in golden yellow with black and olive husks, pale leafy stems and small red fruits, set in a half-drop layout on a beige ground Ground colour Beige Accent colour Golden Yellow Approx. shades #E8D7C5, #C59154, #403828, #C7AE7C Print scale Medium (main motif approx. 1/9 of image width) Repeat Directional - cut one way Suitable garments Shirt, Resort Shirt, Dress, Skirt, Co-ord Set, Blouse Fabric Poly Spandex Composition Polyester Stretch Stretchable - 7% Lycra (spandex) GSM 200 gsm (this fabric) Width 54 inch Minimum order From 1 metre; flexible wholesale minimums Production Made to order - customisable Dispatch 4-7 days from our Surat mill Other bases The same artwork prints on any of our 17 bases - ask for a quote Printing High-definition digital print, wash-fast Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Full fabric requirement chart This design is printed on Poly Spandex here, and the same artwork prints to order on any of our 17 base cloths. Quantities are at 44 inch width. Plain figures for a standard size, without a directional-cut allowance - add roughly 0.5 m per garment if every piece must be laid the same way. Estimates: confirm against your own pattern before ordering. Fabric needed for 37 garment types - womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 - 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 - 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 - 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 - 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 - 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 - 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 - 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 - 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 - 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 - 3.5 m Poly Crepe one-piece cut Dress 3.0 - 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 - 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 - 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 - 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 - 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 - 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 - 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 - 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 - 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 - 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 - 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 - 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 - 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 - 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4-8 Kids Kurta 1.5 m Poly Muslin age 4-8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 - 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Bulk pricing 6 metres and above - 10% off 25 metres and above - 15% off 50 metres and above - 20% off 100 metres and above - 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Maxi Dress - 3.5 - 4.0 m; Dress - 3.5 - 4.0 m; Co-ord Set - 3.5 - 4.0 m; Kurti - 2.75 m; Saree Blouse - 1.25 m; Shirt - 2.5 - 3.0 m; Men's Shirt - 2.5 - 3.0 m; Skirt - 2.25 - 2.75 m; Kids Frock - 1.75 m; Scarf - 1.0 - 2.0 m (all at 44 inch width, and already uplifted for one-way directional cutting). The full chart on this page covers 37 garment types including menswear, kids wear and home furnishing. How should I lay out and cut this print? This is a directional print, so every pattern piece must be cut the same way up - you cannot turn pieces to save cloth. Match the design at centre-front, at the side seams and across the sleeve head. Budget roughly 15-20% more fabric than a plain or non-directional print, which is why the yardage figures on this page are already uplifted. Which fabric quality suits this print best? This listing is Poly Spandex. If you need the same artwork on a different quality - a crisper shirting, a heavier satin, a viscose - we print it to order on any of our 17 bases. Message us using the WhatsApp button on this page. What colours does this pair with? The ground reads as Beige and the accent as Golden Yellow. The measured shades in the artwork are approximately #E8D7C5, #C59154, #403828, #C7AE7C, so you can match trims, linings and thread against those directly. Can I get this in a different colour or scale? Yes. Design 4077 can be recoloured to any Pantone shade, and the print scale can be enlarged or reduced before bulk production, at no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. Our team works with 250+ producible base fabrics in total. Only our 17 highest-volume bases are listed on the website - the full range covers viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp for a specific base. Minimum for an off-catalogue base is 100 metres, and it needs extra lead time. Is this fabric ready stock or made to order? This length is printed to order on Poly Spandex. Nothing is pre-made stock - we print each order specially, so the design can be recoloured, rescaled, or printed on any of our 17 base cloths. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers. Note that 1 unit = 1 metre. How long does delivery take? We dispatch in 4-7 days from order confirmation - that is the printing and finishing time at our Surat mill. Courier transit after that depends on your location in India. Free shipping on orders above Rs1,199 within India. Need a different colour, scale or a base not listed? Our team works with 250+ base fabrics. Message us on WhatsApp or email info@clothwala.com - mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

Cream & Black Speckled Upright Feathers Printed Spandex Fabric - Small-scale all-over print of upright feathers in mixed sizes, spotted and barred in black, brown and tan with occasional orange ones, closely spaced in loose vertical columns on a cream ground, printed to order on Poly Spandex and sold by the metre. Available from 1 metre with flexible wholesale minimums, made at our Surat mill and dispatched in 4-7 days. About this print Design 4076 is small-scale all-over print of upright feathers in mixed sizes, spotted and barred in black, brown and tan with occasional orange ones, closely spaced in loose vertical columns on a cream ground. The scale is fine (main motif approx. 1/33 of image width). The print is directional. All pattern pieces must be cut the same way up, and the design should be matched at centre-front, side seams and sleeve heads. Allow roughly 15-20% extra fabric over a plain print for matching. Measured shades in the artwork run approximately #F1F2DC, #2C2E1A, #75705C, so trims, linings and thread can be matched directly against those values. Part of the Clothwala 2026 digital-print range. Fabric needed per garment Quantities below already include the extra allowance needed to cut a one-way directional print. These allow for one-way (directional) cutting - every piece laid the same way, which is how a print like this must be cut. The full chart further down gives the plain figure without that allowance. All quantities are estimates for a standard size; confirm against your own pattern before ordering. Garment Fabric needed Recommended quality Maxi Dress 3.5 - 4.0 m Poly Georgette (70-90 GSM) Dress 3.5 - 4.0 m Poly Crepe (80-95 GSM) Co-ord Set 3.5 - 4.0 m Poly Crepe (80-95 GSM) Kurti 2.75 m Poly Crepe (80-95 GSM) Saree Blouse 1.25 m Poly Japanese Satin (90-110 GSM) Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Men's Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Skirt 2.25 - 2.75 m Viscose Crepe (110-140 GSM) Kids Frock 1.75 m Cotton Cambric (80-110 GSM) Scarf 1.0 - 2.0 m Poly Chiffon (60-80 GSM) Specifications Design code 4076 Print Speckled Upright Feathers - Small-scale all-over print of upright feathers in mixed sizes, spotted and barred in black, brown and tan with occasional orange ones, closely spaced in loose vertical columns on a cream ground Ground colour Cream Accent colour Black Approx. shades #F1F2DC, #2C2E1A, #75705C Print scale Fine (main motif approx. 1/33 of image width) Repeat Directional - cut one way Suitable garments Shirt, Dress, Blouse, Tunic, Skirt, Scarf Fabric Poly Spandex Composition Polyester Stretch Stretchable - 7% Lycra (spandex) GSM 200 gsm (this fabric) Width 54 inch Minimum order From 1 metre; flexible wholesale minimums Production Made to order - customisable Dispatch 4-7 days from our Surat mill Other bases The same artwork prints on any of our 17 bases - ask for a quote Printing High-definition digital print, wash-fast Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Full fabric requirement chart This design is printed on Poly Spandex here, and the same artwork prints to order on any of our 17 base cloths. Quantities are at 44 inch width. Plain figures for a standard size, without a directional-cut allowance - add roughly 0.5 m per garment if every piece must be laid the same way. Estimates: confirm against your own pattern before ordering. Fabric needed for 37 garment types - womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 - 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 - 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 - 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 - 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 - 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 - 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 - 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 - 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 - 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 - 3.5 m Poly Crepe one-piece cut Dress 3.0 - 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 - 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 - 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 - 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 - 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 - 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 - 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 - 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 - 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 - 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 - 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 - 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 - 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 - 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4-8 Kids Kurta 1.5 m Poly Muslin age 4-8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 - 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Bulk pricing 6 metres and above - 10% off 25 metres and above - 15% off 50 metres and above - 20% off 100 metres and above - 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Maxi Dress - 3.5 - 4.0 m; Dress - 3.5 - 4.0 m; Co-ord Set - 3.5 - 4.0 m; Kurti - 2.75 m; Saree Blouse - 1.25 m; Shirt - 2.5 - 3.0 m; Men's Shirt - 2.5 - 3.0 m; Skirt - 2.25 - 2.75 m; Kids Frock - 1.75 m; Scarf - 1.0 - 2.0 m (all at 44 inch width, and already uplifted for one-way directional cutting). The full chart on this page covers 37 garment types including menswear, kids wear and home furnishing. How should I lay out and cut this print? This is a directional print, so every pattern piece must be cut the same way up - you cannot turn pieces to save cloth. Match the design at centre-front, at the side seams and across the sleeve head. Budget roughly 15-20% more fabric than a plain or non-directional print, which is why the yardage figures on this page are already uplifted. Which fabric quality suits this print best? This listing is Poly Spandex. If you need the same artwork on a different quality - a crisper shirting, a heavier satin, a viscose - we print it to order on any of our 17 bases. Message us using the WhatsApp button on this page. What colours does this pair with? The ground reads as Cream and the accent as Black. The measured shades in the artwork are approximately #F1F2DC, #2C2E1A, #75705C, so you can match trims, linings and thread against those directly. Can I get this in a different colour or scale? Yes. Design 4076 can be recoloured to any Pantone shade, and the print scale can be enlarged or reduced before bulk production, at no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. Our team works with 250+ producible base fabrics in total. Only our 17 highest-volume bases are listed on the website - the full range covers viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp for a specific base. Minimum for an off-catalogue base is 100 metres, and it needs extra lead time. Is this fabric ready stock or made to order? This length is printed to order on Poly Spandex. Nothing is pre-made stock - we print each order specially, so the design can be recoloured, rescaled, or printed on any of our 17 base cloths. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers. Note that 1 unit = 1 metre. How long does delivery take? We dispatch in 4-7 days from order confirmation - that is the printing and finishing time at our Surat mill. Courier transit after that depends on your location in India. Free shipping on orders above Rs1,199 within India. Need a different colour, scale or a base not listed? Our team works with 250+ base fabrics. Message us on WhatsApp or email info@clothwala.com - mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

Cream & Black Stippled Maze Blocks Printed Spandex Fabric - Small-scale all-over geometric of black right-angled maze segments and rounded bars with grey-green graded patches and fine stippled dot areas on a cream ground, printed to order on Poly Spandex and sold by the metre. Available from 1 metre with flexible wholesale minimums, made at our Surat mill and dispatched in 4-7 days. About this print Design 4075 is small-scale all-over geometric of black right-angled maze segments and rounded bars with grey-green graded patches and fine stippled dot areas on a cream ground. The scale is small (main motif approx. 1/17 of image width). This is an all-over, non-directional print, so pattern pieces can be nested either way up to make the most of the cloth. Measured shades in the artwork run approximately #E5D9C7, #12140D, #666855, so trims, linings and thread can be matched directly against those values. Part of the Clothwala 2026 digital-print range. Fabric needed per garment Quantities below are for a standard non-directional layout at 44 inch width. These allow for one-way (directional) cutting - every piece laid the same way, which is how a print like this must be cut. The full chart further down gives the plain figure without that allowance. All quantities are estimates for a standard size; confirm against your own pattern before ordering. Garment Fabric needed Recommended quality Maxi Dress 3.5 - 4.0 m Poly Georgette (70-90 GSM) Dress 3.5 - 4.0 m Poly Crepe (80-95 GSM) Co-ord Set 3.5 - 4.0 m Poly Crepe (80-95 GSM) Kurti 2.75 m Poly Crepe (80-95 GSM) Saree Blouse 1.25 m Poly Japanese Satin (90-110 GSM) Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Men's Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Skirt 2.25 - 2.75 m Viscose Crepe (110-140 GSM) Kids Frock 1.75 m Cotton Cambric (80-110 GSM) Scarf 1.0 - 2.0 m Poly Chiffon (60-80 GSM) Specifications Design code 4075 Print Stippled Maze Blocks - Small-scale all-over geometric of black right-angled maze segments and rounded bars with grey-green graded patches and fine stippled dot areas on a cream ground Ground colour Cream Accent colour Black Approx. shades #E5D9C7, #12140D, #666855 Print scale Small (main motif approx. 1/17 of image width) Repeat All-over / non-directional Suitable garments Shirt, Men's Shirt, Dress, Co-ord Set, Skirt, Tunic Fabric Poly Spandex Composition Polyester Stretch Stretchable - 7% Lycra (spandex) GSM 200 gsm (this fabric) Width 54 inch Minimum order From 1 metre; flexible wholesale minimums Production Made to order - customisable Dispatch 4-7 days from our Surat mill Other bases The same artwork prints on any of our 17 bases - ask for a quote Printing High-definition digital print, wash-fast Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Full fabric requirement chart This design is printed on Poly Spandex here, and the same artwork prints to order on any of our 17 base cloths. Quantities are at 44 inch width. Plain figures for a standard size, without a directional-cut allowance - add roughly 0.5 m per garment if every piece must be laid the same way. Estimates: confirm against your own pattern before ordering. Fabric needed for 37 garment types - womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 - 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 - 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 - 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 - 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 - 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 - 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 - 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 - 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 - 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 - 3.5 m Poly Crepe one-piece cut Dress 3.0 - 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 - 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 - 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 - 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 - 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 - 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 - 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 - 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 - 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 - 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 - 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 - 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 - 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 - 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4-8 Kids Kurta 1.5 m Poly Muslin age 4-8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 - 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Bulk pricing 6 metres and above - 10% off 25 metres and above - 15% off 50 metres and above - 20% off 100 metres and above - 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Maxi Dress - 3.5 - 4.0 m; Dress - 3.5 - 4.0 m; Co-ord Set - 3.5 - 4.0 m; Kurti - 2.75 m; Saree Blouse - 1.25 m; Shirt - 2.5 - 3.0 m; Men's Shirt - 2.5 - 3.0 m; Skirt - 2.25 - 2.75 m; Kids Frock - 1.75 m; Scarf - 1.0 - 2.0 m (all at 44 inch width). The full chart on this page covers 37 garment types including menswear, kids wear and home furnishing. How should I lay out and cut this print? This is an all-over, non-directional print, so pattern pieces can be nested either way up to save cloth. No special matching is needed at the seams. Which fabric quality suits this print best? This listing is Poly Spandex. If you need the same artwork on a different quality - a crisper shirting, a heavier satin, a viscose - we print it to order on any of our 17 bases. Message us using the WhatsApp button on this page. What colours does this pair with? The ground reads as Cream and the accent as Black. The measured shades in the artwork are approximately #E5D9C7, #12140D, #666855, so you can match trims, linings and thread against those directly. Can I get this in a different colour or scale? Yes. Design 4075 can be recoloured to any Pantone shade, and the print scale can be enlarged or reduced before bulk production, at no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. Our team works with 250+ producible base fabrics in total. Only our 17 highest-volume bases are listed on the website - the full range covers viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp for a specific base. Minimum for an off-catalogue base is 100 metres, and it needs extra lead time. Is this fabric ready stock or made to order? This length is printed to order on Poly Spandex. Nothing is pre-made stock - we print each order specially, so the design can be recoloured, rescaled, or printed on any of our 17 base cloths. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers. Note that 1 unit = 1 metre. How long does delivery take? We dispatch in 4-7 days from order confirmation - that is the printing and finishing time at our Surat mill. Courier transit after that depends on your location in India. Free shipping on orders above Rs1,199 within India. Need a different colour, scale or a base not listed? Our team works with 250+ base fabrics. Message us on WhatsApp or email info@clothwala.com - mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

White & Ochre Squares & Scribble Printed Spandex Fabric - Open all-over painterly abstract of overlapping brushed squares in ochre, amber, grey, beige and black, tied together with loose scribbled black lines, on a white ground, printed to order on Poly Spandex and sold by the metre. Available from 1 metre with flexible wholesale minimums, made at our Surat mill and dispatched in 4-7 days. About this print Design 4074 is open all-over painterly abstract of overlapping brushed squares in ochre, amber, grey, beige and black, tied together with loose scribbled black lines, on a white ground. The scale is small (main motif approx. 1/14 of image width). This is an all-over, non-directional print, so pattern pieces can be nested either way up to make the most of the cloth. Measured shades in the artwork run approximately #FCFCFB, #BD832D, #181618, #EAC378, so trims, linings and thread can be matched directly against those values. Part of the Clothwala 2026 digital-print range. Fabric needed per garment Quantities below are for a standard non-directional layout at 44 inch width. These allow for one-way (directional) cutting - every piece laid the same way, which is how a print like this must be cut. The full chart further down gives the plain figure without that allowance. All quantities are estimates for a standard size; confirm against your own pattern before ordering. Garment Fabric needed Recommended quality Maxi Dress 3.5 - 4.0 m Poly Georgette (70-90 GSM) Dress 3.5 - 4.0 m Poly Crepe (80-95 GSM) Co-ord Set 3.5 - 4.0 m Poly Crepe (80-95 GSM) Kurti 2.75 m Poly Crepe (80-95 GSM) Saree Blouse 1.25 m Poly Japanese Satin (90-110 GSM) Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Men's Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Skirt 2.25 - 2.75 m Viscose Crepe (110-140 GSM) Kids Frock 1.75 m Cotton Cambric (80-110 GSM) Scarf 1.0 - 2.0 m Poly Chiffon (60-80 GSM) Specifications Design code 4074 Print Ochre Squares & Scribble - Open all-over painterly abstract of overlapping brushed squares in ochre, amber, grey, beige and black, tied together with loose scribbled black lines, on a white ground Ground colour White Accent colour Ochre Approx. shades #FCFCFB, #BD832D, #181618, #EAC378 Print scale Small (main motif approx. 1/14 of image width) Repeat All-over / non-directional Suitable garments Dress, Shirt, Blouse, Co-ord Set, Tunic, Scarf Fabric Poly Spandex Composition Polyester Stretch Stretchable - 7% Lycra (spandex) GSM 200 gsm (this fabric) Width 54 inch Minimum order From 1 metre; flexible wholesale minimums Production Made to order - customisable Dispatch 4-7 days from our Surat mill Other bases The same artwork prints on any of our 17 bases - ask for a quote Printing High-definition digital print, wash-fast Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Full fabric requirement chart This design is printed on Poly Spandex here, and the same artwork prints to order on any of our 17 base cloths. Quantities are at 44 inch width. Plain figures for a standard size, without a directional-cut allowance - add roughly 0.5 m per garment if every piece must be laid the same way. Estimates: confirm against your own pattern before ordering. Fabric needed for 37 garment types - womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 - 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 - 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 - 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 - 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 - 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 - 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 - 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 - 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 - 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 - 3.5 m Poly Crepe one-piece cut Dress 3.0 - 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 - 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 - 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 - 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 - 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 - 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 - 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 - 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 - 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 - 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 - 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 - 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 - 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 - 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4-8 Kids Kurta 1.5 m Poly Muslin age 4-8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 - 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Bulk pricing 6 metres and above - 10% off 25 metres and above - 15% off 50 metres and above - 20% off 100 metres and above - 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Maxi Dress - 3.5 - 4.0 m; Dress - 3.5 - 4.0 m; Co-ord Set - 3.5 - 4.0 m; Kurti - 2.75 m; Saree Blouse - 1.25 m; Shirt - 2.5 - 3.0 m; Men's Shirt - 2.5 - 3.0 m; Skirt - 2.25 - 2.75 m; Kids Frock - 1.75 m; Scarf - 1.0 - 2.0 m (all at 44 inch width). The full chart on this page covers 37 garment types including menswear, kids wear and home furnishing. How should I lay out and cut this print? This is an all-over, non-directional print, so pattern pieces can be nested either way up to save cloth. No special matching is needed at the seams. Which fabric quality suits this print best? This listing is Poly Spandex. If you need the same artwork on a different quality - a crisper shirting, a heavier satin, a viscose - we print it to order on any of our 17 bases. Message us using the WhatsApp button on this page. What colours does this pair with? The ground reads as White and the accent as Ochre. The measured shades in the artwork are approximately #FCFCFB, #BD832D, #181618, #EAC378, so you can match trims, linings and thread against those directly. Can I get this in a different colour or scale? Yes. Design 4074 can be recoloured to any Pantone shade, and the print scale can be enlarged or reduced before bulk production, at no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. Our team works with 250+ producible base fabrics in total. Only our 17 highest-volume bases are listed on the website - the full range covers viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp for a specific base. Minimum for an off-catalogue base is 100 metres, and it needs extra lead time. Is this fabric ready stock or made to order? This length is printed to order on Poly Spandex. Nothing is pre-made stock - we print each order specially, so the design can be recoloured, rescaled, or printed on any of our 17 base cloths. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers. Note that 1 unit = 1 metre. How long does delivery take? We dispatch in 4-7 days from order confirmation - that is the printing and finishing time at our Surat mill. Courier transit after that depends on your location in India. Free shipping on orders above Rs1,199 within India. Need a different colour, scale or a base not listed? Our team works with 250+ base fabrics. Message us on WhatsApp or email info@clothwala.com - mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

White & Black Cut-Out Shape Collage Printed Spandex Fabric - Dense all-over flat graphic of solid black cut-out shapes, both blocky and curved, pierced with small white squares and dots, with outlined doodle details and pale grey accents on a white ground, printed to order on Poly Spandex and sold by the metre. Available from 1 metre with flexible wholesale minimums, made at our Surat mill and dispatched in 4-7 days. About this print Design 4073 is dense all-over flat graphic of solid black cut-out shapes, both blocky and curved, pierced with small white squares and dots, with outlined doodle details and pale grey accents on a white ground. The scale is medium (main motif approx. 1/8 of image width). This is an all-over, non-directional print, so pattern pieces can be nested either way up to make the most of the cloth. Measured shades in the artwork run approximately #F0F0F0, #020202, #AFAFAF, so trims, linings and thread can be matched directly against those values. Part of the Clothwala 2026 digital-print range. Fabric needed per garment Quantities below are for a standard non-directional layout at 44 inch width. These allow for one-way (directional) cutting - every piece laid the same way, which is how a print like this must be cut. The full chart further down gives the plain figure without that allowance. All quantities are estimates for a standard size; confirm against your own pattern before ordering. Garment Fabric needed Recommended quality Maxi Dress 3.5 - 4.0 m Poly Georgette (70-90 GSM) Dress 3.5 - 4.0 m Poly Crepe (80-95 GSM) Co-ord Set 3.5 - 4.0 m Poly Crepe (80-95 GSM) Kurti 2.75 m Poly Crepe (80-95 GSM) Saree Blouse 1.25 m Poly Japanese Satin (90-110 GSM) Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Men's Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Skirt 2.25 - 2.75 m Viscose Crepe (110-140 GSM) Kids Frock 1.75 m Cotton Cambric (80-110 GSM) Scarf 1.0 - 2.0 m Poly Chiffon (60-80 GSM) Specifications Design code 4073 Print Cut-Out Shape Collage - Dense all-over flat graphic of solid black cut-out shapes, both blocky and curved, pierced with small white squares and dots, with outlined doodle details and pale grey accents on a white ground Ground colour White Accent colour Black Approx. shades #F0F0F0, #020202, #AFAFAF Print scale Medium (main motif approx. 1/8 of image width) Repeat All-over / non-directional Suitable garments Shirt, Dress, Co-ord Set, Skirt, Resort Shirt, Blouse Fabric Poly Spandex Composition Polyester Stretch Stretchable - 7% Lycra (spandex) GSM 200 gsm (this fabric) Width 54 inch Minimum order From 1 metre; flexible wholesale minimums Production Made to order - customisable Dispatch 4-7 days from our Surat mill Other bases The same artwork prints on any of our 17 bases - ask for a quote Printing High-definition digital print, wash-fast Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Full fabric requirement chart This design is printed on Poly Spandex here, and the same artwork prints to order on any of our 17 base cloths. Quantities are at 44 inch width. Plain figures for a standard size, without a directional-cut allowance - add roughly 0.5 m per garment if every piece must be laid the same way. Estimates: confirm against your own pattern before ordering. Fabric needed for 37 garment types - womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 - 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 - 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 - 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 - 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 - 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 - 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 - 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 - 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 - 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 - 3.5 m Poly Crepe one-piece cut Dress 3.0 - 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 - 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 - 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 - 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 - 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 - 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 - 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 - 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 - 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 - 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 - 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 - 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 - 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 - 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4-8 Kids Kurta 1.5 m Poly Muslin age 4-8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 - 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Bulk pricing 6 metres and above - 10% off 25 metres and above - 15% off 50 metres and above - 20% off 100 metres and above - 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Maxi Dress - 3.5 - 4.0 m; Dress - 3.5 - 4.0 m; Co-ord Set - 3.5 - 4.0 m; Kurti - 2.75 m; Saree Blouse - 1.25 m; Shirt - 2.5 - 3.0 m; Men's Shirt - 2.5 - 3.0 m; Skirt - 2.25 - 2.75 m; Kids Frock - 1.75 m; Scarf - 1.0 - 2.0 m (all at 44 inch width). The full chart on this page covers 37 garment types including menswear, kids wear and home furnishing. How should I lay out and cut this print? This is an all-over, non-directional print, so pattern pieces can be nested either way up to save cloth. No special matching is needed at the seams. Which fabric quality suits this print best? This listing is Poly Spandex. If you need the same artwork on a different quality - a crisper shirting, a heavier satin, a viscose - we print it to order on any of our 17 bases. Message us using the WhatsApp button on this page. What colours does this pair with? The ground reads as White and the accent as Black. The measured shades in the artwork are approximately #F0F0F0, #020202, #AFAFAF, so you can match trims, linings and thread against those directly. Can I get this in a different colour or scale? Yes. Design 4073 can be recoloured to any Pantone shade, and the print scale can be enlarged or reduced before bulk production, at no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. Our team works with 250+ producible base fabrics in total. Only our 17 highest-volume bases are listed on the website - the full range covers viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp for a specific base. Minimum for an off-catalogue base is 100 metres, and it needs extra lead time. Is this fabric ready stock or made to order? This length is printed to order on Poly Spandex. Nothing is pre-made stock - we print each order specially, so the design can be recoloured, rescaled, or printed on any of our 17 base cloths. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers. Note that 1 unit = 1 metre. How long does delivery take? We dispatch in 4-7 days from order confirmation - that is the printing and finishing time at our Surat mill. Courier transit after that depends on your location in India. Free shipping on orders above Rs1,199 within India. Need a different colour, scale or a base not listed? Our team works with 250+ base fabrics. Message us on WhatsApp or email info@clothwala.com - mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

Off-White & Black Ink Blocks & Grids Printed Spandex Fabric - All-over monochrome abstract of hand-cut black rectangles, L-shapes and small squares with patches of fine hand-drawn grid lines and a few pale grey tabs on an off-white ground, printed to order on Poly Spandex and sold by the metre. Available from 1 metre with flexible wholesale minimums, made at our Surat mill and dispatched in 4-7 days. About this print Design 4072 is all-over monochrome abstract of hand-cut black rectangles, l-shapes and small squares with patches of fine hand-drawn grid lines and a few pale grey tabs on an off-white ground. The scale is small (main motif approx. 1/14 of image width). This is an all-over, non-directional print, so pattern pieces can be nested either way up to make the most of the cloth. Measured shades in the artwork run approximately #EEEFE5, #1F1F1E, #C8C8C5, so trims, linings and thread can be matched directly against those values. Part of the Clothwala 2026 digital-print range. Fabric needed per garment Quantities below are for a standard non-directional layout at 44 inch width. These allow for one-way (directional) cutting - every piece laid the same way, which is how a print like this must be cut. The full chart further down gives the plain figure without that allowance. All quantities are estimates for a standard size; confirm against your own pattern before ordering. Garment Fabric needed Recommended quality Maxi Dress 3.5 - 4.0 m Poly Georgette (70-90 GSM) Dress 3.5 - 4.0 m Poly Crepe (80-95 GSM) Co-ord Set 3.5 - 4.0 m Poly Crepe (80-95 GSM) Kurti 2.75 m Poly Crepe (80-95 GSM) Saree Blouse 1.25 m Poly Japanese Satin (90-110 GSM) Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Men's Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Skirt 2.25 - 2.75 m Viscose Crepe (110-140 GSM) Kids Frock 1.75 m Cotton Cambric (80-110 GSM) Scarf 1.0 - 2.0 m Poly Chiffon (60-80 GSM) Specifications Design code 4072 Print Ink Blocks & Grids - All-over monochrome abstract of hand-cut black rectangles, L-shapes and small squares with patches of fine hand-drawn grid lines and a few pale grey tabs on an off-white ground Ground colour Off-White Accent colour Black Approx. shades #EEEFE5, #1F1F1E, #C8C8C5 Print scale Small (main motif approx. 1/14 of image width) Repeat All-over / non-directional Suitable garments Shirt, Men's Shirt, Dress, Co-ord Set, Skirt, Blouse Fabric Poly Spandex Composition Polyester Stretch Stretchable - 7% Lycra (spandex) GSM 200 gsm (this fabric) Width 54 inch Minimum order From 1 metre; flexible wholesale minimums Production Made to order - customisable Dispatch 4-7 days from our Surat mill Other bases The same artwork prints on any of our 17 bases - ask for a quote Printing High-definition digital print, wash-fast Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Full fabric requirement chart This design is printed on Poly Spandex here, and the same artwork prints to order on any of our 17 base cloths. Quantities are at 44 inch width. Plain figures for a standard size, without a directional-cut allowance - add roughly 0.5 m per garment if every piece must be laid the same way. Estimates: confirm against your own pattern before ordering. Fabric needed for 37 garment types - womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 - 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 - 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 - 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 - 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 - 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 - 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 - 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 - 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 - 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 - 3.5 m Poly Crepe one-piece cut Dress 3.0 - 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 - 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 - 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 - 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 - 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 - 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 - 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 - 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 - 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 - 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 - 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 - 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 - 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 - 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4-8 Kids Kurta 1.5 m Poly Muslin age 4-8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 - 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Bulk pricing 6 metres and above - 10% off 25 metres and above - 15% off 50 metres and above - 20% off 100 metres and above - 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Maxi Dress - 3.5 - 4.0 m; Dress - 3.5 - 4.0 m; Co-ord Set - 3.5 - 4.0 m; Kurti - 2.75 m; Saree Blouse - 1.25 m; Shirt - 2.5 - 3.0 m; Men's Shirt - 2.5 - 3.0 m; Skirt - 2.25 - 2.75 m; Kids Frock - 1.75 m; Scarf - 1.0 - 2.0 m (all at 44 inch width). The full chart on this page covers 37 garment types including menswear, kids wear and home furnishing. How should I lay out and cut this print? This is an all-over, non-directional print, so pattern pieces can be nested either way up to save cloth. No special matching is needed at the seams. Which fabric quality suits this print best? This listing is Poly Spandex. If you need the same artwork on a different quality - a crisper shirting, a heavier satin, a viscose - we print it to order on any of our 17 bases. Message us using the WhatsApp button on this page. What colours does this pair with? The ground reads as Off-White and the accent as Black. The measured shades in the artwork are approximately #EEEFE5, #1F1F1E, #C8C8C5, so you can match trims, linings and thread against those directly. Can I get this in a different colour or scale? Yes. Design 4072 can be recoloured to any Pantone shade, and the print scale can be enlarged or reduced before bulk production, at no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. Our team works with 250+ producible base fabrics in total. Only our 17 highest-volume bases are listed on the website - the full range covers viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp for a specific base. Minimum for an off-catalogue base is 100 metres, and it needs extra lead time. Is this fabric ready stock or made to order? This length is printed to order on Poly Spandex. Nothing is pre-made stock - we print each order specially, so the design can be recoloured, rescaled, or printed on any of our 17 base cloths. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers. Note that 1 unit = 1 metre. How long does delivery take? We dispatch in 4-7 days from order confirmation - that is the printing and finishing time at our Surat mill. Courier transit after that depends on your location in India. Free shipping on orders above Rs1,199 within India. Need a different colour, scale or a base not listed? Our team works with 250+ base fabrics. Message us on WhatsApp or email info@clothwala.com - mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

White & Black Rough Ink Blocks Printed Spandex Fabric - Spaced all-over abstract of rough-edged solid black blocks and dry-brush bars with fine scratch marks, pale beige patches and a small repeating orange rectangle on a white ground, printed to order on Poly Spandex and sold by the metre. Available from 1 metre with flexible wholesale minimums, made at our Surat mill and dispatched in 4-7 days. About this print Design 4071 is spaced all-over abstract of rough-edged solid black blocks and dry-brush bars with fine scratch marks, pale beige patches and a small repeating orange rectangle on a white ground. The scale is small (main motif approx. 1/14 of image width). This is an all-over, non-directional print, so pattern pieces can be nested either way up to make the most of the cloth. Measured shades in the artwork run approximately #FAFAF9, #070707, #EAE4D9, so trims, linings and thread can be matched directly against those values. Part of the Clothwala 2026 digital-print range. Fabric needed per garment Quantities below are for a standard non-directional layout at 44 inch width. These allow for one-way (directional) cutting - every piece laid the same way, which is how a print like this must be cut. The full chart further down gives the plain figure without that allowance. All quantities are estimates for a standard size; confirm against your own pattern before ordering. Garment Fabric needed Recommended quality Maxi Dress 3.5 - 4.0 m Poly Georgette (70-90 GSM) Dress 3.5 - 4.0 m Poly Crepe (80-95 GSM) Co-ord Set 3.5 - 4.0 m Poly Crepe (80-95 GSM) Kurti 2.75 m Poly Crepe (80-95 GSM) Saree Blouse 1.25 m Poly Japanese Satin (90-110 GSM) Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Men's Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Skirt 2.25 - 2.75 m Viscose Crepe (110-140 GSM) Kids Frock 1.75 m Cotton Cambric (80-110 GSM) Scarf 1.0 - 2.0 m Poly Chiffon (60-80 GSM) Specifications Design code 4071 Print Rough Ink Blocks - Spaced all-over abstract of rough-edged solid black blocks and dry-brush bars with fine scratch marks, pale beige patches and a small repeating orange rectangle on a white ground Ground colour White Accent colour Black Approx. shades #FAFAF9, #070707, #EAE4D9 Print scale Small (main motif approx. 1/14 of image width) Repeat All-over / non-directional Suitable garments Shirt, Dress, Blouse, Co-ord Set, Skirt, Tunic Fabric Poly Spandex Composition Polyester Stretch Stretchable - 7% Lycra (spandex) GSM 200 gsm (this fabric) Width 54 inch Minimum order From 1 metre; flexible wholesale minimums Production Made to order - customisable Dispatch 4-7 days from our Surat mill Other bases The same artwork prints on any of our 17 bases - ask for a quote Printing High-definition digital print, wash-fast Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Full fabric requirement chart This design is printed on Poly Spandex here, and the same artwork prints to order on any of our 17 base cloths. Quantities are at 44 inch width. Plain figures for a standard size, without a directional-cut allowance - add roughly 0.5 m per garment if every piece must be laid the same way. Estimates: confirm against your own pattern before ordering. Fabric needed for 37 garment types - womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 - 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 - 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 - 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 - 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 - 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 - 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 - 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 - 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 - 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 - 3.5 m Poly Crepe one-piece cut Dress 3.0 - 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 - 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 - 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 - 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 - 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 - 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 - 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 - 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 - 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 - 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 - 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 - 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 - 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 - 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4-8 Kids Kurta 1.5 m Poly Muslin age 4-8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 - 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Bulk pricing 6 metres and above - 10% off 25 metres and above - 15% off 50 metres and above - 20% off 100 metres and above - 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Maxi Dress - 3.5 - 4.0 m; Dress - 3.5 - 4.0 m; Co-ord Set - 3.5 - 4.0 m; Kurti - 2.75 m; Saree Blouse - 1.25 m; Shirt - 2.5 - 3.0 m; Men's Shirt - 2.5 - 3.0 m; Skirt - 2.25 - 2.75 m; Kids Frock - 1.75 m; Scarf - 1.0 - 2.0 m (all at 44 inch width). The full chart on this page covers 37 garment types including menswear, kids wear and home furnishing. How should I lay out and cut this print? This is an all-over, non-directional print, so pattern pieces can be nested either way up to save cloth. No special matching is needed at the seams. Which fabric quality suits this print best? This listing is Poly Spandex. If you need the same artwork on a different quality - a crisper shirting, a heavier satin, a viscose - we print it to order on any of our 17 bases. Message us using the WhatsApp button on this page. What colours does this pair with? The ground reads as White and the accent as Black. The measured shades in the artwork are approximately #FAFAF9, #070707, #EAE4D9, so you can match trims, linings and thread against those directly. Can I get this in a different colour or scale? Yes. Design 4071 can be recoloured to any Pantone shade, and the print scale can be enlarged or reduced before bulk production, at no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. Our team works with 250+ producible base fabrics in total. Only our 17 highest-volume bases are listed on the website - the full range covers viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp for a specific base. Minimum for an off-catalogue base is 100 metres, and it needs extra lead time. Is this fabric ready stock or made to order? This length is printed to order on Poly Spandex. Nothing is pre-made stock - we print each order specially, so the design can be recoloured, rescaled, or printed on any of our 17 base cloths. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers. Note that 1 unit = 1 metre. How long does delivery take? We dispatch in 4-7 days from order confirmation - that is the printing and finishing time at our Surat mill. Courier transit after that depends on your location in India. Free shipping on orders above Rs1,199 within India. Need a different colour, scale or a base not listed? Our team works with 250+ base fabrics. Message us on WhatsApp or email info@clothwala.com - mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

Cream & Charcoal Chartreuse Block Collage Printed Spandex Fabric - Medium-scale all-over collage of washed and textured blocks in charcoal, chartreuse yellow and pale blue-grey with fine line hatching and speckle on a mottled cream ground, printed to order on Poly Spandex and sold by the metre. Available from 1 metre with flexible wholesale minimums, made at our Surat mill and dispatched in 4-7 days. About this print Design 4070 is medium-scale all-over collage of washed and textured blocks in charcoal, chartreuse yellow and pale blue-grey with fine line hatching and speckle on a mottled cream ground. The scale is medium (main motif approx. 1/8 of image width). This is an all-over, non-directional print, so pattern pieces can be nested either way up to make the most of the cloth. Measured shades in the artwork run approximately #E9DCBA, #40473E, #CABD4F, #131411, so trims, linings and thread can be matched directly against those values. Part of the Clothwala 2026 digital-print range. Fabric needed per garment Quantities below are for a standard non-directional layout at 44 inch width. These allow for one-way (directional) cutting - every piece laid the same way, which is how a print like this must be cut. The full chart further down gives the plain figure without that allowance. All quantities are estimates for a standard size; confirm against your own pattern before ordering. Garment Fabric needed Recommended quality Maxi Dress 3.5 - 4.0 m Poly Georgette (70-90 GSM) Dress 3.5 - 4.0 m Poly Crepe (80-95 GSM) Co-ord Set 3.5 - 4.0 m Poly Crepe (80-95 GSM) Kurti 2.75 m Poly Crepe (80-95 GSM) Saree Blouse 1.25 m Poly Japanese Satin (90-110 GSM) Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Men's Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Skirt 2.25 - 2.75 m Viscose Crepe (110-140 GSM) Kids Frock 1.75 m Cotton Cambric (80-110 GSM) Scarf 1.0 - 2.0 m Poly Chiffon (60-80 GSM) Specifications Design code 4070 Print Chartreuse Block Collage - Medium-scale all-over collage of washed and textured blocks in charcoal, chartreuse yellow and pale blue-grey with fine line hatching and speckle on a mottled cream ground Ground colour Cream Accent colour Charcoal Approx. shades #E9DCBA, #40473E, #CABD4F, #131411 Print scale Medium (main motif approx. 1/8 of image width) Repeat All-over / non-directional Suitable garments Shirt, Dress, Co-ord Set, Tunic, Kaftan, Scarf Fabric Poly Spandex Composition Polyester Stretch Stretchable - 7% Lycra (spandex) GSM 200 gsm (this fabric) Width 54 inch Minimum order From 1 metre; flexible wholesale minimums Production Made to order - customisable Dispatch 4-7 days from our Surat mill Other bases The same artwork prints on any of our 17 bases - ask for a quote Printing High-definition digital print, wash-fast Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Full fabric requirement chart This design is printed on Poly Spandex here, and the same artwork prints to order on any of our 17 base cloths. Quantities are at 44 inch width. Plain figures for a standard size, without a directional-cut allowance - add roughly 0.5 m per garment if every piece must be laid the same way. Estimates: confirm against your own pattern before ordering. Fabric needed for 37 garment types - womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 - 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 - 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 - 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 - 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 - 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 - 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 - 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 - 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 - 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 - 3.5 m Poly Crepe one-piece cut Dress 3.0 - 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 - 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 - 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 - 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 - 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 - 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 - 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 - 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 - 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 - 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 - 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 - 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 - 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 - 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4-8 Kids Kurta 1.5 m Poly Muslin age 4-8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 - 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Bulk pricing 6 metres and above - 10% off 25 metres and above - 15% off 50 metres and above - 20% off 100 metres and above - 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Maxi Dress - 3.5 - 4.0 m; Dress - 3.5 - 4.0 m; Co-ord Set - 3.5 - 4.0 m; Kurti - 2.75 m; Saree Blouse - 1.25 m; Shirt - 2.5 - 3.0 m; Men's Shirt - 2.5 - 3.0 m; Skirt - 2.25 - 2.75 m; Kids Frock - 1.75 m; Scarf - 1.0 - 2.0 m (all at 44 inch width). The full chart on this page covers 37 garment types including menswear, kids wear and home furnishing. How should I lay out and cut this print? This is an all-over, non-directional print, so pattern pieces can be nested either way up to save cloth. No special matching is needed at the seams. Which fabric quality suits this print best? This listing is Poly Spandex. If you need the same artwork on a different quality - a crisper shirting, a heavier satin, a viscose - we print it to order on any of our 17 bases. Message us using the WhatsApp button on this page. What colours does this pair with? The ground reads as Cream and the accent as Charcoal. The measured shades in the artwork are approximately #E9DCBA, #40473E, #CABD4F, #131411, so you can match trims, linings and thread against those directly. Can I get this in a different colour or scale? Yes. Design 4070 can be recoloured to any Pantone shade, and the print scale can be enlarged or reduced before bulk production, at no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. Our team works with 250+ producible base fabrics in total. Only our 17 highest-volume bases are listed on the website - the full range covers viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp for a specific base. Minimum for an off-catalogue base is 100 metres, and it needs extra lead time. Is this fabric ready stock or made to order? This length is printed to order on Poly Spandex. Nothing is pre-made stock - we print each order specially, so the design can be recoloured, rescaled, or printed on any of our 17 base cloths. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers. Note that 1 unit = 1 metre. How long does delivery take? We dispatch in 4-7 days from order confirmation - that is the printing and finishing time at our Surat mill. Courier transit after that depends on your location in India. Free shipping on orders above Rs1,199 within India. Need a different colour, scale or a base not listed? Our team works with 250+ base fabrics. Message us on WhatsApp or email info@clothwala.com - mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

Cream & Black Tilted Black Rectangles Printed Spandex Fabric - Small-scale all-over geometric of slightly tilted solid black rectangles joined by fine scratchy black lines, over soft beige patches on a cream ground, printed to order on Poly Spandex and sold by the metre. Available from 1 metre with flexible wholesale minimums, made at our Surat mill and dispatched in 4-7 days. About this print Design 4069 is small-scale all-over geometric of slightly tilted solid black rectangles joined by fine scratchy black lines, over soft beige patches on a cream ground. The scale is small (main motif approx. 1/20 of image width). This is an all-over, non-directional print, so pattern pieces can be nested either way up to make the most of the cloth. Measured shades in the artwork run approximately #E9E1CA, #0F0E09, #B8B2A0, so trims, linings and thread can be matched directly against those values. Part of the Clothwala 2026 digital-print range. Fabric needed per garment Quantities below are for a standard non-directional layout at 44 inch width. These allow for one-way (directional) cutting - every piece laid the same way, which is how a print like this must be cut. The full chart further down gives the plain figure without that allowance. All quantities are estimates for a standard size; confirm against your own pattern before ordering. Garment Fabric needed Recommended quality Maxi Dress 3.5 - 4.0 m Poly Georgette (70-90 GSM) Dress 3.5 - 4.0 m Poly Crepe (80-95 GSM) Co-ord Set 3.5 - 4.0 m Poly Crepe (80-95 GSM) Kurti 2.75 m Poly Crepe (80-95 GSM) Saree Blouse 1.25 m Poly Japanese Satin (90-110 GSM) Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Men's Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Skirt 2.25 - 2.75 m Viscose Crepe (110-140 GSM) Kids Frock 1.75 m Cotton Cambric (80-110 GSM) Scarf 1.0 - 2.0 m Poly Chiffon (60-80 GSM) Specifications Design code 4069 Print Tilted Black Rectangles - Small-scale all-over geometric of slightly tilted solid black rectangles joined by fine scratchy black lines, over soft beige patches on a cream ground Ground colour Cream Accent colour Black Approx. shades #E9E1CA, #0F0E09, #B8B2A0 Print scale Small (main motif approx. 1/20 of image width) Repeat All-over / non-directional Suitable garments Shirt, Men's Shirt, Dress, Blouse, Co-ord Set, Skirt Fabric Poly Spandex Composition Polyester Stretch Stretchable - 7% Lycra (spandex) GSM 200 gsm (this fabric) Width 54 inch Minimum order From 1 metre; flexible wholesale minimums Production Made to order - customisable Dispatch 4-7 days from our Surat mill Other bases The same artwork prints on any of our 17 bases - ask for a quote Printing High-definition digital print, wash-fast Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Full fabric requirement chart This design is printed on Poly Spandex here, and the same artwork prints to order on any of our 17 base cloths. Quantities are at 44 inch width. Plain figures for a standard size, without a directional-cut allowance - add roughly 0.5 m per garment if every piece must be laid the same way. Estimates: confirm against your own pattern before ordering. Fabric needed for 37 garment types - womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 - 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 - 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 - 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 - 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 - 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 - 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 - 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 - 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 - 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 - 3.5 m Poly Crepe one-piece cut Dress 3.0 - 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 - 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 - 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 - 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 - 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 - 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 - 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 - 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 - 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 - 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 - 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 - 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 - 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 - 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4-8 Kids Kurta 1.5 m Poly Muslin age 4-8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 - 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Bulk pricing 6 metres and above - 10% off 25 metres and above - 15% off 50 metres and above - 20% off 100 metres and above - 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Maxi Dress - 3.5 - 4.0 m; Dress - 3.5 - 4.0 m; Co-ord Set - 3.5 - 4.0 m; Kurti - 2.75 m; Saree Blouse - 1.25 m; Shirt - 2.5 - 3.0 m; Men's Shirt - 2.5 - 3.0 m; Skirt - 2.25 - 2.75 m; Kids Frock - 1.75 m; Scarf - 1.0 - 2.0 m (all at 44 inch width). The full chart on this page covers 37 garment types including menswear, kids wear and home furnishing. How should I lay out and cut this print? This is an all-over, non-directional print, so pattern pieces can be nested either way up to save cloth. No special matching is needed at the seams. Which fabric quality suits this print best? This listing is Poly Spandex. If you need the same artwork on a different quality - a crisper shirting, a heavier satin, a viscose - we print it to order on any of our 17 bases. Message us using the WhatsApp button on this page. What colours does this pair with? The ground reads as Cream and the accent as Black. The measured shades in the artwork are approximately #E9E1CA, #0F0E09, #B8B2A0, so you can match trims, linings and thread against those directly. Can I get this in a different colour or scale? Yes. Design 4069 can be recoloured to any Pantone shade, and the print scale can be enlarged or reduced before bulk production, at no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. Our team works with 250+ producible base fabrics in total. Only our 17 highest-volume bases are listed on the website - the full range covers viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp for a specific base. Minimum for an off-catalogue base is 100 metres, and it needs extra lead time. Is this fabric ready stock or made to order? This length is printed to order on Poly Spandex. Nothing is pre-made stock - we print each order specially, so the design can be recoloured, rescaled, or printed on any of our 17 base cloths. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers. Note that 1 unit = 1 metre. How long does delivery take? We dispatch in 4-7 days from order confirmation - that is the printing and finishing time at our Surat mill. Courier transit after that depends on your location in India. Free shipping on orders above Rs1,199 within India. Need a different colour, scale or a base not listed? Our team works with 250+ base fabrics. Message us on WhatsApp or email info@clothwala.com - mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

Cream & Teal Bauhaus Blocks & Circles Printed Spandex Fabric - Dense all-over flat geometric of overlapping teal and sky blue rectangles, mustard blocks and circles, black bars, crossing lines and dot rows on a cream ground, printed to order on Poly Spandex and sold by the metre. Available from 1 metre with flexible wholesale minimums, made at our Surat mill and dispatched in 4-7 days. About this print Design 4068 is dense all-over flat geometric of overlapping teal and sky blue rectangles, mustard blocks and circles, black bars, crossing lines and dot rows on a cream ground. The scale is small (main motif approx. 1/12 of image width). This is an all-over, non-directional print, so pattern pieces can be nested either way up to make the most of the cloth. Measured shades in the artwork run approximately #ECE9C6, #326F83, #E0AD27, #202220, so trims, linings and thread can be matched directly against those values. Part of the Clothwala 2026 digital-print range. Fabric needed per garment Quantities below are for a standard non-directional layout at 44 inch width. These allow for one-way (directional) cutting - every piece laid the same way, which is how a print like this must be cut. The full chart further down gives the plain figure without that allowance. All quantities are estimates for a standard size; confirm against your own pattern before ordering. Garment Fabric needed Recommended quality Maxi Dress 3.5 - 4.0 m Poly Georgette (70-90 GSM) Dress 3.5 - 4.0 m Poly Crepe (80-95 GSM) Co-ord Set 3.5 - 4.0 m Poly Crepe (80-95 GSM) Kurti 2.75 m Poly Crepe (80-95 GSM) Saree Blouse 1.25 m Poly Japanese Satin (90-110 GSM) Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Men's Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Skirt 2.25 - 2.75 m Viscose Crepe (110-140 GSM) Kids Frock 1.75 m Cotton Cambric (80-110 GSM) Scarf 1.0 - 2.0 m Poly Chiffon (60-80 GSM) Specifications Design code 4068 Print Bauhaus Blocks & Circles - Dense all-over flat geometric of overlapping teal and sky blue rectangles, mustard blocks and circles, black bars, crossing lines and dot rows on a cream ground Ground colour Cream Accent colour Teal Approx. shades #ECE9C6, #326F83, #E0AD27, #202220 Print scale Small (main motif approx. 1/12 of image width) Repeat All-over / non-directional Suitable garments Shirt, Men's Shirt, Resort Shirt, Dress, Co-ord Set, Skirt Fabric Poly Spandex Composition Polyester Stretch Stretchable - 7% Lycra (spandex) GSM 200 gsm (this fabric) Width 54 inch Minimum order From 1 metre; flexible wholesale minimums Production Made to order - customisable Dispatch 4-7 days from our Surat mill Other bases The same artwork prints on any of our 17 bases - ask for a quote Printing High-definition digital print, wash-fast Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Full fabric requirement chart This design is printed on Poly Spandex here, and the same artwork prints to order on any of our 17 base cloths. Quantities are at 44 inch width. Plain figures for a standard size, without a directional-cut allowance - add roughly 0.5 m per garment if every piece must be laid the same way. Estimates: confirm against your own pattern before ordering. Fabric needed for 37 garment types - womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 - 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 - 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 - 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 - 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 - 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 - 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 - 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 - 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 - 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 - 3.5 m Poly Crepe one-piece cut Dress 3.0 - 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 - 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 - 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 - 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 - 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 - 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 - 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 - 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 - 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 - 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 - 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 - 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 - 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 - 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4-8 Kids Kurta 1.5 m Poly Muslin age 4-8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 - 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Bulk pricing 6 metres and above - 10% off 25 metres and above - 15% off 50 metres and above - 20% off 100 metres and above - 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Maxi Dress - 3.5 - 4.0 m; Dress - 3.5 - 4.0 m; Co-ord Set - 3.5 - 4.0 m; Kurti - 2.75 m; Saree Blouse - 1.25 m; Shirt - 2.5 - 3.0 m; Men's Shirt - 2.5 - 3.0 m; Skirt - 2.25 - 2.75 m; Kids Frock - 1.75 m; Scarf - 1.0 - 2.0 m (all at 44 inch width). The full chart on this page covers 37 garment types including menswear, kids wear and home furnishing. How should I lay out and cut this print? This is an all-over, non-directional print, so pattern pieces can be nested either way up to save cloth. No special matching is needed at the seams. Which fabric quality suits this print best? This listing is Poly Spandex. If you need the same artwork on a different quality - a crisper shirting, a heavier satin, a viscose - we print it to order on any of our 17 bases. Message us using the WhatsApp button on this page. What colours does this pair with? The ground reads as Cream and the accent as Teal. The measured shades in the artwork are approximately #ECE9C6, #326F83, #E0AD27, #202220, so you can match trims, linings and thread against those directly. Can I get this in a different colour or scale? Yes. Design 4068 can be recoloured to any Pantone shade, and the print scale can be enlarged or reduced before bulk production, at no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. Our team works with 250+ producible base fabrics in total. Only our 17 highest-volume bases are listed on the website - the full range covers viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp for a specific base. Minimum for an off-catalogue base is 100 metres, and it needs extra lead time. Is this fabric ready stock or made to order? This length is printed to order on Poly Spandex. Nothing is pre-made stock - we print each order specially, so the design can be recoloured, rescaled, or printed on any of our 17 base cloths. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers. Note that 1 unit = 1 metre. How long does delivery take? We dispatch in 4-7 days from order confirmation - that is the printing and finishing time at our Surat mill. Courier transit after that depends on your location in India. Free shipping on orders above Rs1,199 within India. Need a different colour, scale or a base not listed? Our team works with 250+ base fabrics. Message us on WhatsApp or email info@clothwala.com - mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

Cream & Mustard Yellow Brush Blocks Printed Spandex Fabric - All-over painterly abstract of mustard yellow brushed blocks with black and charcoal textured bars, grey-blue patches, scratchy ink lines and dot clusters on a cream ground, printed to order on Poly Spandex and sold by the metre. Available from 1 metre with flexible wholesale minimums, made at our Surat mill and dispatched in 4-7 days. About this print Design 4067 is all-over painterly abstract of mustard yellow brushed blocks with black and charcoal textured bars, grey-blue patches, scratchy ink lines and dot clusters on a cream ground. The scale is medium (main motif approx. 1/10 of image width). This is an all-over, non-directional print, so pattern pieces can be nested either way up to make the most of the cloth. Measured shades in the artwork run approximately #F4EBDE, #E9BB18, #2E2D28, so trims, linings and thread can be matched directly against those values. Part of the Clothwala 2026 digital-print range. Fabric needed per garment Quantities below are for a standard non-directional layout at 44 inch width. These allow for one-way (directional) cutting - every piece laid the same way, which is how a print like this must be cut. The full chart further down gives the plain figure without that allowance. All quantities are estimates for a standard size; confirm against your own pattern before ordering. Garment Fabric needed Recommended quality Maxi Dress 3.5 - 4.0 m Poly Georgette (70-90 GSM) Dress 3.5 - 4.0 m Poly Crepe (80-95 GSM) Co-ord Set 3.5 - 4.0 m Poly Crepe (80-95 GSM) Kurti 2.75 m Poly Crepe (80-95 GSM) Saree Blouse 1.25 m Poly Japanese Satin (90-110 GSM) Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Men's Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Skirt 2.25 - 2.75 m Viscose Crepe (110-140 GSM) Kids Frock 1.75 m Cotton Cambric (80-110 GSM) Scarf 1.0 - 2.0 m Poly Chiffon (60-80 GSM) Specifications Design code 4067 Print Mustard Brush Blocks - All-over painterly abstract of mustard yellow brushed blocks with black and charcoal textured bars, grey-blue patches, scratchy ink lines and dot clusters on a cream ground Ground colour Cream Accent colour Mustard Yellow Approx. shades #F4EBDE, #E9BB18, #2E2D28 Print scale Medium (main motif approx. 1/10 of image width) Repeat All-over / non-directional Suitable garments Shirt, Dress, Co-ord Set, Tunic, Skirt, Scarf Fabric Poly Spandex Composition Polyester Stretch Stretchable - 7% Lycra (spandex) GSM 200 gsm (this fabric) Width 54 inch Minimum order From 1 metre; flexible wholesale minimums Production Made to order - customisable Dispatch 4-7 days from our Surat mill Other bases The same artwork prints on any of our 17 bases - ask for a quote Printing High-definition digital print, wash-fast Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Full fabric requirement chart This design is printed on Poly Spandex here, and the same artwork prints to order on any of our 17 base cloths. Quantities are at 44 inch width. Plain figures for a standard size, without a directional-cut allowance - add roughly 0.5 m per garment if every piece must be laid the same way. Estimates: confirm against your own pattern before ordering. Fabric needed for 37 garment types - womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 - 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 - 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 - 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 - 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 - 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 - 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 - 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 - 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 - 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 - 3.5 m Poly Crepe one-piece cut Dress 3.0 - 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 - 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 - 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 - 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 - 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 - 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 - 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 - 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 - 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 - 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 - 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 - 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 - 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 - 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4-8 Kids Kurta 1.5 m Poly Muslin age 4-8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 - 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Bulk pricing 6 metres and above - 10% off 25 metres and above - 15% off 50 metres and above - 20% off 100 metres and above - 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Maxi Dress - 3.5 - 4.0 m; Dress - 3.5 - 4.0 m; Co-ord Set - 3.5 - 4.0 m; Kurti - 2.75 m; Saree Blouse - 1.25 m; Shirt - 2.5 - 3.0 m; Men's Shirt - 2.5 - 3.0 m; Skirt - 2.25 - 2.75 m; Kids Frock - 1.75 m; Scarf - 1.0 - 2.0 m (all at 44 inch width). The full chart on this page covers 37 garment types including menswear, kids wear and home furnishing. How should I lay out and cut this print? This is an all-over, non-directional print, so pattern pieces can be nested either way up to save cloth. No special matching is needed at the seams. Which fabric quality suits this print best? This listing is Poly Spandex. If you need the same artwork on a different quality - a crisper shirting, a heavier satin, a viscose - we print it to order on any of our 17 bases. Message us using the WhatsApp button on this page. What colours does this pair with? The ground reads as Cream and the accent as Mustard Yellow. The measured shades in the artwork are approximately #F4EBDE, #E9BB18, #2E2D28, so you can match trims, linings and thread against those directly. Can I get this in a different colour or scale? Yes. Design 4067 can be recoloured to any Pantone shade, and the print scale can be enlarged or reduced before bulk production, at no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. Our team works with 250+ producible base fabrics in total. Only our 17 highest-volume bases are listed on the website - the full range covers viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp for a specific base. Minimum for an off-catalogue base is 100 metres, and it needs extra lead time. Is this fabric ready stock or made to order? This length is printed to order on Poly Spandex. Nothing is pre-made stock - we print each order specially, so the design can be recoloured, rescaled, or printed on any of our 17 base cloths. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers. Note that 1 unit = 1 metre. How long does delivery take? We dispatch in 4-7 days from order confirmation - that is the printing and finishing time at our Surat mill. Courier transit after that depends on your location in India. Free shipping on orders above Rs1,199 within India. Need a different colour, scale or a base not listed? Our team works with 250+ base fabrics. Message us on WhatsApp or email info@clothwala.com - mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

White & Black Rounded Bars & Lines Printed Spandex Fabric - Small-scale all-over flat graphic of black rounded bars and L-shapes, thin right-angled line groups and dots with pale yellow rounded blocks on a white ground, printed to order on Poly Spandex and sold by the metre. Available from 1 metre with flexible wholesale minimums, made at our Surat mill and dispatched in 4-7 days. About this print Design 4066 is small-scale all-over flat graphic of black rounded bars and l-shapes, thin right-angled line groups and dots with pale yellow rounded blocks on a white ground. The scale is small (main motif approx. 1/20 of image width). This is an all-over, non-directional print, so pattern pieces can be nested either way up to make the most of the cloth. Measured shades in the artwork run approximately #F9F8F6, #111112, #F2D37A, so trims, linings and thread can be matched directly against those values. Part of the Clothwala 2026 digital-print range. Fabric needed per garment Quantities below are for a standard non-directional layout at 44 inch width. These allow for one-way (directional) cutting - every piece laid the same way, which is how a print like this must be cut. The full chart further down gives the plain figure without that allowance. All quantities are estimates for a standard size; confirm against your own pattern before ordering. Garment Fabric needed Recommended quality Maxi Dress 3.5 - 4.0 m Poly Georgette (70-90 GSM) Dress 3.5 - 4.0 m Poly Crepe (80-95 GSM) Co-ord Set 3.5 - 4.0 m Poly Crepe (80-95 GSM) Kurti 2.75 m Poly Crepe (80-95 GSM) Saree Blouse 1.25 m Poly Japanese Satin (90-110 GSM) Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Men's Shirt 2.5 - 3.0 m Cotton Cambric (80-110 GSM) Skirt 2.25 - 2.75 m Viscose Crepe (110-140 GSM) Kids Frock 1.75 m Cotton Cambric (80-110 GSM) Scarf 1.0 - 2.0 m Poly Chiffon (60-80 GSM) Specifications Design code 4066 Print Rounded Bars & Lines - Small-scale all-over flat graphic of black rounded bars and L-shapes, thin right-angled line groups and dots with pale yellow rounded blocks on a white ground Ground colour White Accent colour Black Approx. shades #F9F8F6, #111112, #F2D37A Print scale Small (main motif approx. 1/20 of image width) Repeat All-over / non-directional Suitable garments Shirt, Dress, Blouse, Co-ord Set, Skirt, Kids' Dress Fabric Poly Spandex Composition Polyester Stretch Stretchable - 7% Lycra (spandex) GSM 200 gsm (this fabric) Width 54 inch Minimum order From 1 metre; flexible wholesale minimums Production Made to order - customisable Dispatch 4-7 days from our Surat mill Other bases The same artwork prints on any of our 17 bases - ask for a quote Printing High-definition digital print, wash-fast Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Full fabric requirement chart This design is printed on Poly Spandex here, and the same artwork prints to order on any of our 17 base cloths. Quantities are at 44 inch width. Plain figures for a standard size, without a directional-cut allowance - add roughly 0.5 m per garment if every piece must be laid the same way. Estimates: confirm against your own pattern before ordering. Fabric needed for 37 garment types - womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 - 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 - 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 - 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 - 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 - 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 - 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 - 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 - 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 - 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 - 3.5 m Poly Crepe one-piece cut Dress 3.0 - 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 - 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 - 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 - 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 - 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 - 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 - 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 - 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 - 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 - 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 - 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 - 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 - 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 - 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4-8 Kids Kurta 1.5 m Poly Muslin age 4-8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 - 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Bulk pricing 6 metres and above - 10% off 25 metres and above - 15% off 50 metres and above - 20% off 100 metres and above - 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Maxi Dress - 3.5 - 4.0 m; Dress - 3.5 - 4.0 m; Co-ord Set - 3.5 - 4.0 m; Kurti - 2.75 m; Saree Blouse - 1.25 m; Shirt - 2.5 - 3.0 m; Men's Shirt - 2.5 - 3.0 m; Skirt - 2.25 - 2.75 m; Kids Frock - 1.75 m; Scarf - 1.0 - 2.0 m (all at 44 inch width). The full chart on this page covers 37 garment types including menswear, kids wear and home furnishing. How should I lay out and cut this print? This is an all-over, non-directional print, so pattern pieces can be nested either way up to save cloth. No special matching is needed at the seams. Which fabric quality suits this print best? This listing is Poly Spandex. If you need the same artwork on a different quality - a crisper shirting, a heavier satin, a viscose - we print it to order on any of our 17 bases. Message us using the WhatsApp button on this page. What colours does this pair with? The ground reads as White and the accent as Black. The measured shades in the artwork are approximately #F9F8F6, #111112, #F2D37A, so you can match trims, linings and thread against those directly. Can I get this in a different colour or scale? Yes. Design 4066 can be recoloured to any Pantone shade, and the print scale can be enlarged or reduced before bulk production, at no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. Our team works with 250+ producible base fabrics in total. Only our 17 highest-volume bases are listed on the website - the full range covers viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp for a specific base. Minimum for an off-catalogue base is 100 metres, and it needs extra lead time. Is this fabric ready stock or made to order? This length is printed to order on Poly Spandex. Nothing is pre-made stock - we print each order specially, so the design can be recoloured, rescaled, or printed on any of our 17 base cloths. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers. Note that 1 unit = 1 metre. How long does delivery take? We dispatch in 4-7 days from order confirmation - that is the printing and finishing time at our Surat mill. Courier transit after that depends on your location in India. Free shipping on orders above Rs1,199 within India. Need a different colour, scale or a base not listed? Our team works with 250+ base fabrics. Message us on WhatsApp or email info@clothwala.com - mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less