GEOMETRIC PRINTS

Charcoal Grey geometric digital print fabric, sold by the metre in 17 fabric qualities from Rs249 per metre. Suitable for Kurta. Available from 1 metre with flexible wholesale minimums and bulk tiers. Made to order at our Surat mill and dispatched within one week. About this print A dense mosaic of pixelated blocks and rectangles creates a dynamic, textured surface in a sophisticated monochrome palette of charcoal, slate, and silver. This print embodies a futuristic, techno-glitch trend, projecting an edgy and modern mood. It is perfectly suited for creating statement co-ord sets, contemporary kurtas, and sharp trousers for urban and evening wear. Fabric needed per garment Garment Fabric needed Recommended quality Why Kurta 2.5 – 3.0 m Poly Muslin (70–90 GSM) a breathable body that sits well over a straight cut Full fabric requirement chart This design is printed to order on any of our 17 base cloths, so it can be cut for far more than the garments above. Fabric quantities below are at 44 inch width. Fabric needed for 37 garment types — womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 – 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 – 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 – 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 – 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 – 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 – 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 – 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 – 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 – 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 – 3.5 m Poly Crepe one-piece cut Dress 3.0 – 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 – 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 – 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 – 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 – 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 – 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 – 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 – 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 – 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 – 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 – 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 – 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 – 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 – 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4–8 Kids Kurta 1.5 m Poly Muslin age 4–8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 – 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Specifications Design code 621 Primary colour Charcoal Grey Full palette charcoal grey, slate grey, ash grey, jet black, silver, off-white Pattern Geometric Print scale Fine Aesthetic Urban Street Mood Dark & Dramatic Suitable garments Kurta Fabric options 17 bases listed online; 100+ qualities available on request Base families Viscose, cotton, polyester, nylon, nylon-cotton, polyester-cotton Width 44 inch standard; 54 inch on request Price range Rs249 – Rs649 per metre Minimum order From 1 metre; flexible wholesale minimums Off-catalogue base MOQ 100 metres Printing High-definition digital print, wash-fast Production Made to order — customisable Dispatch Within 1 week from Surat, Gujarat Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Bulk pricing 7 metres and above — 10% off 26 metres and above — 15% off 50 metres and above — 20% off 100 metres and above — 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Kurta — 2.5 – 3.0 m (all at 44 inch width). The full chart on this page also covers menswear — men's shirt 2.0–2.5 m, men's kurta 2.5–3.0 m, kurta pyjama set 4.0–4.5 m, Nehru jacket 1.5–2.0 m, sherwani 3.5–4.0 m — plus kids wear and home furnishing. Can this print be used for menswear? Yes. The same artwork prints on all 17 base cloths, so it can be cut for men's shirts, resort shirts, kurtas, kurta pyjama sets, Nehru jackets, bandgalas and bomber jackets. Poly Muslin and Cotton Cambric are the usual choices for men's shirting; Poly Linen Satin for structured jackets. Which fabric quality should I choose? for a kurta, Poly Muslin. All 17 qualities carry the same artwork, so you can order any base cloth in this design. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers — contact us for mill-direct bulk rates. Note that 1 unit = 0.5 metres. An off-catalogue fabric base is the one exception: those start at 100 metres. Can design 621 be printed in another colour? Yes. This geometric design can be recoloured to any Pantone shade on request, with no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. We hold over 100 fabric qualities in total. Only our 17 highest-volume, most-trending bases are listed on the website — the full range covers viscose bases, cotton bases, polyester bases, nylon, nylon-cotton blends and polyester-cotton blends. If you need a specific base for your brand, message us on WhatsApp at +91 99588 03184 and we will quote it mill-direct. Minimum order for an off-catalogue base is 100 metres, and it needs extra lead time, so plan the order in advance. Which fabric base families can this design be printed on? Viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton — over 100 qualities across those families. The same artwork can be printed on any of them. The 17 shown on this page are the bases we run at scale and keep ready for quick production; anything outside that list is made to order at 100 metres minimum. Is this fabric ready stock or made to order? All Clothwala fabric is made to order. Nothing is pre-made stock — we print each order specially for you, which means the design can be customised to your requirement: a different colourway, a larger or smaller print scale, or your own artwork printed on any of our 17 base cloths. How long does delivery take? We dispatch within one week of order confirmation. Transit time after dispatch depends on your courier and where you are located in India, so total delivery time varies by destination. Contact us on info@clothwala.com for a delivery estimate for your city. Is the print colour-fast? Yes. High-definition wash-fast inks are used. OEKO-TEX compliant fabric options are available for export orders. Need a fabric base not listed here? We hold 100+ qualities across viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp or email info@clothwala.com — mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

Charcoal Grey abstract digital print fabric, sold by the metre in 17 fabric qualities from Rs249 per metre. Suitable for Co-ord Set. Available from 1 metre with flexible wholesale minimums and bulk tiers. Made to order at our Surat mill and dispatched within one week. About this print This print features a complex mosaic of pixelated blocks in a palette of charcoal grey, slate, and ash white, accented with subtle hints of dusty mauve. It embodies a futuristic 'glitch art' trend, creating an edgy and digitally-inspired mood. Perfect for creating statement co-ord sets, contemporary kurtas, or avant-garde dresses for urban and evening wear. Fabric needed per garment Garment Fabric needed Recommended quality Why Co-ord Set 3.0 – 3.5 m Poly Crepe (80–95 GSM) a stable, low-stretch hand so top and bottom hang as a matched set Full fabric requirement chart This design is printed to order on any of our 17 base cloths, so it can be cut for far more than the garments above. Fabric quantities below are at 44 inch width. Fabric needed for 37 garment types — womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 – 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 – 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 – 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 – 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 – 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 – 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 – 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 – 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 – 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 – 3.5 m Poly Crepe one-piece cut Dress 3.0 – 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 – 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 – 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 – 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 – 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 – 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 – 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 – 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 – 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 – 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 – 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 – 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 – 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 – 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4–8 Kids Kurta 1.5 m Poly Muslin age 4–8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 – 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Specifications Design code 620 Primary colour Charcoal Grey Full palette Charcoal Grey, Slate Grey, Ash White, Dusty Mauve, Jet Black Pattern Abstract Print scale Medium Aesthetic Contemporary Fusion Mood Dark & Dramatic Suitable garments Co-ord Set Fabric options 17 bases listed online; 100+ qualities available on request Base families Viscose, cotton, polyester, nylon, nylon-cotton, polyester-cotton Width 44 inch standard; 54 inch on request Price range Rs249 – Rs649 per metre Minimum order From 1 metre; flexible wholesale minimums Off-catalogue base MOQ 100 metres Printing High-definition digital print, wash-fast Production Made to order — customisable Dispatch Within 1 week from Surat, Gujarat Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Bulk pricing 7 metres and above — 10% off 26 metres and above — 15% off 50 metres and above — 20% off 100 metres and above — 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Co-ord Set — 3.0 – 3.5 m (all at 44 inch width). The full chart on this page also covers menswear — men's shirt 2.0–2.5 m, men's kurta 2.5–3.0 m, kurta pyjama set 4.0–4.5 m, Nehru jacket 1.5–2.0 m, sherwani 3.5–4.0 m — plus kids wear and home furnishing. Can this print be used for menswear? Yes. The same artwork prints on all 17 base cloths, so it can be cut for men's shirts, resort shirts, kurtas, kurta pyjama sets, Nehru jackets, bandgalas and bomber jackets. Poly Muslin and Cotton Cambric are the usual choices for men's shirting; Poly Linen Satin for structured jackets. Which fabric quality should I choose? for a co-ord set, Poly Crepe. All 17 qualities carry the same artwork, so you can order any base cloth in this design. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers — contact us for mill-direct bulk rates. Note that 1 unit = 0.5 metres. An off-catalogue fabric base is the one exception: those start at 100 metres. Can design 620 be printed in another colour? Yes. This abstract design can be recoloured to any Pantone shade on request, with no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. We hold over 100 fabric qualities in total. Only our 17 highest-volume, most-trending bases are listed on the website — the full range covers viscose bases, cotton bases, polyester bases, nylon, nylon-cotton blends and polyester-cotton blends. If you need a specific base for your brand, message us on WhatsApp at +91 99588 03184 and we will quote it mill-direct. Minimum order for an off-catalogue base is 100 metres, and it needs extra lead time, so plan the order in advance. Which fabric base families can this design be printed on? Viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton — over 100 qualities across those families. The same artwork can be printed on any of them. The 17 shown on this page are the bases we run at scale and keep ready for quick production; anything outside that list is made to order at 100 metres minimum. Is this fabric ready stock or made to order? All Clothwala fabric is made to order. Nothing is pre-made stock — we print each order specially for you, which means the design can be customised to your requirement: a different colourway, a larger or smaller print scale, or your own artwork printed on any of our 17 base cloths. How long does delivery take? We dispatch within one week of order confirmation. Transit time after dispatch depends on your courier and where you are located in India, so total delivery time varies by destination. Contact us on info@clothwala.com for a delivery estimate for your city. Is the print colour-fast? Yes. High-definition wash-fast inks are used. OEKO-TEX compliant fabric options are available for export orders. Need a fabric base not listed here? We hold 100+ qualities across viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp or email info@clothwala.com — mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

Charcoal Grey abstract digital print fabric, sold by the metre in 17 fabric qualities from Rs249 per metre. Suitable for Maxi Dress. Available from 1 metre with flexible wholesale minimums and bulk tiers. Made to order at our Surat mill and dispatched within one week. About this print A dynamic all-over print features a pixelated mosaic of black, charcoal, and slate grey squares, overlaid with shadowy, distorted waves that create a digital static effect. This design embodies a futuristic Techno-Glitch trend, projecting an edgy and modern mood. Perfect for creating statement co-ord sets, contemporary sarees, and sharp kurtas for urban and party wear. Fabric needed per garment Garment Fabric needed Recommended quality Why Maxi Dress 3.0 – 3.5 m Poly Georgette (70–90 GSM) fluid drape that carries a full-length silhouette without stiffness Full fabric requirement chart This design is printed to order on any of our 17 base cloths, so it can be cut for far more than the garments above. Fabric quantities below are at 44 inch width. Fabric needed for 37 garment types — womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 – 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 – 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 – 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 – 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 – 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 – 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 – 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 – 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 – 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 – 3.5 m Poly Crepe one-piece cut Dress 3.0 – 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 – 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 – 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 – 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 – 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 – 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 – 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 – 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 – 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 – 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 – 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 – 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 – 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 – 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4–8 Kids Kurta 1.5 m Poly Muslin age 4–8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 – 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Specifications Design code 619 Primary colour Charcoal Grey Full palette Black, Charcoal Grey, Slate Grey, Ash, Off-White Pattern Abstract Print scale Fine Aesthetic Contemporary Fusion Mood Dark & Dramatic Suitable garments Maxi Dress Fabric options 17 bases listed online; 100+ qualities available on request Base families Viscose, cotton, polyester, nylon, nylon-cotton, polyester-cotton Width 44 inch standard; 54 inch on request Price range Rs249 – Rs649 per metre Minimum order From 1 metre; flexible wholesale minimums Off-catalogue base MOQ 100 metres Printing High-definition digital print, wash-fast Production Made to order — customisable Dispatch Within 1 week from Surat, Gujarat Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Bulk pricing 7 metres and above — 10% off 26 metres and above — 15% off 50 metres and above — 20% off 100 metres and above — 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Maxi Dress — 3.0 – 3.5 m (all at 44 inch width). The full chart on this page also covers menswear — men's shirt 2.0–2.5 m, men's kurta 2.5–3.0 m, kurta pyjama set 4.0–4.5 m, Nehru jacket 1.5–2.0 m, sherwani 3.5–4.0 m — plus kids wear and home furnishing. Can this print be used for menswear? Yes. The same artwork prints on all 17 base cloths, so it can be cut for men's shirts, resort shirts, kurtas, kurta pyjama sets, Nehru jackets, bandgalas and bomber jackets. Poly Muslin and Cotton Cambric are the usual choices for men's shirting; Poly Linen Satin for structured jackets. Which fabric quality should I choose? for a maxi dress, Poly Georgette. All 17 qualities carry the same artwork, so you can order any base cloth in this design. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers — contact us for mill-direct bulk rates. Note that 1 unit = 0.5 metres. An off-catalogue fabric base is the one exception: those start at 100 metres. Can design 619 be printed in another colour? Yes. This abstract design can be recoloured to any Pantone shade on request, with no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. We hold over 100 fabric qualities in total. Only our 17 highest-volume, most-trending bases are listed on the website — the full range covers viscose bases, cotton bases, polyester bases, nylon, nylon-cotton blends and polyester-cotton blends. If you need a specific base for your brand, message us on WhatsApp at +91 99588 03184 and we will quote it mill-direct. Minimum order for an off-catalogue base is 100 metres, and it needs extra lead time, so plan the order in advance. Which fabric base families can this design be printed on? Viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton — over 100 qualities across those families. The same artwork can be printed on any of them. The 17 shown on this page are the bases we run at scale and keep ready for quick production; anything outside that list is made to order at 100 metres minimum. Is this fabric ready stock or made to order? All Clothwala fabric is made to order. Nothing is pre-made stock — we print each order specially for you, which means the design can be customised to your requirement: a different colourway, a larger or smaller print scale, or your own artwork printed on any of our 17 base cloths. How long does delivery take? We dispatch within one week of order confirmation. Transit time after dispatch depends on your courier and where you are located in India, so total delivery time varies by destination. Contact us on info@clothwala.com for a delivery estimate for your city. Is the print colour-fast? Yes. High-definition wash-fast inks are used. OEKO-TEX compliant fabric options are available for export orders. Need a fabric base not listed here? We hold 100+ qualities across viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp or email info@clothwala.com — mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

Sage Green geometric digital print fabric, sold by the metre in 17 fabric qualities from Rs249 per metre. Suitable for Tunic. Available from 1 metre with flexible wholesale minimums and bulk tiers. Made to order at our Surat mill and dispatched within one week. About this print A captivating grid of geometric motifs unfolds in a sophisticated palette of dusty coral and sage green against an ivory cream base. This print channels a 'Modern Ethnic' trend, creating an earthy and grounded mood with a contemporary edge. It is perfectly suited for crafting stylish kaftans, co-ord sets, and kurta sets for resort or casual wear. Fabric needed per garment Garment Fabric needed Recommended quality Why Tunic 2.0 – 2.5 m Poly Crepe (80–95 GSM) an easy hand that skims rather than clings Full fabric requirement chart This design is printed to order on any of our 17 base cloths, so it can be cut for far more than the garments above. Fabric quantities below are at 44 inch width. Fabric needed for 37 garment types — womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 – 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 – 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 – 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 – 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 – 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 – 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 – 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 – 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 – 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 – 3.5 m Poly Crepe one-piece cut Dress 3.0 – 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 – 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 – 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 – 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 – 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 – 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 – 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 – 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 – 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 – 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 – 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 – 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 – 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 – 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4–8 Kids Kurta 1.5 m Poly Muslin age 4–8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 – 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Specifications Design code 618 Primary colour Sage Green Full palette Dusty Coral, Sage Green, Ivory Cream, Muted Teal, Terracotta Pattern Geometric Print scale Medium Aesthetic Tribal Folk Mood Earthy & Grounded | Craft Inspiration: Ikat Suitable garments Tunic Fabric options 17 bases listed online; 100+ qualities available on request Base families Viscose, cotton, polyester, nylon, nylon-cotton, polyester-cotton Width 44 inch standard; 54 inch on request Price range Rs249 – Rs649 per metre Minimum order From 1 metre; flexible wholesale minimums Off-catalogue base MOQ 100 metres Printing High-definition digital print, wash-fast Production Made to order — customisable Dispatch Within 1 week from Surat, Gujarat Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Bulk pricing 7 metres and above — 10% off 26 metres and above — 15% off 50 metres and above — 20% off 100 metres and above — 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Tunic — 2.0 – 2.5 m (all at 44 inch width). The full chart on this page also covers menswear — men's shirt 2.0–2.5 m, men's kurta 2.5–3.0 m, kurta pyjama set 4.0–4.5 m, Nehru jacket 1.5–2.0 m, sherwani 3.5–4.0 m — plus kids wear and home furnishing. Can this print be used for menswear? Yes. The same artwork prints on all 17 base cloths, so it can be cut for men's shirts, resort shirts, kurtas, kurta pyjama sets, Nehru jackets, bandgalas and bomber jackets. Poly Muslin and Cotton Cambric are the usual choices for men's shirting; Poly Linen Satin for structured jackets. Which fabric quality should I choose? for a tunic, Poly Crepe. All 17 qualities carry the same artwork, so you can order any base cloth in this design. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers — contact us for mill-direct bulk rates. Note that 1 unit = 0.5 metres. An off-catalogue fabric base is the one exception: those start at 100 metres. Can design 618 be printed in another colour? Yes. This geometric design can be recoloured to any Pantone shade on request, with no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. We hold over 100 fabric qualities in total. Only our 17 highest-volume, most-trending bases are listed on the website — the full range covers viscose bases, cotton bases, polyester bases, nylon, nylon-cotton blends and polyester-cotton blends. If you need a specific base for your brand, message us on WhatsApp at +91 99588 03184 and we will quote it mill-direct. Minimum order for an off-catalogue base is 100 metres, and it needs extra lead time, so plan the order in advance. Which fabric base families can this design be printed on? Viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton — over 100 qualities across those families. The same artwork can be printed on any of them. The 17 shown on this page are the bases we run at scale and keep ready for quick production; anything outside that list is made to order at 100 metres minimum. Is this fabric ready stock or made to order? All Clothwala fabric is made to order. Nothing is pre-made stock — we print each order specially for you, which means the design can be customised to your requirement: a different colourway, a larger or smaller print scale, or your own artwork printed on any of our 17 base cloths. How long does delivery take? We dispatch within one week of order confirmation. Transit time after dispatch depends on your courier and where you are located in India, so total delivery time varies by destination. Contact us on info@clothwala.com for a delivery estimate for your city. Is the print colour-fast? Yes. High-definition wash-fast inks are used. OEKO-TEX compliant fabric options are available for export orders. Need a fabric base not listed here? We hold 100+ qualities across viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp or email info@clothwala.com — mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

Terracotta Rust geometric digital print fabric, sold by the metre in 17 fabric qualities from Rs249 per metre. Suitable for Trousers. Available from 1 metre with flexible wholesale minimums and bulk tiers. Made to order at our Surat mill and dispatched within one week. About this print This sophisticated print features a mosaic of pixelated squares and rectangles in a harmonious palette of terracotta rust, sage green, and dusty beige. Embodying a modern digital aesthetic, the design exudes an earthy, grounded, and refined mood. It is perfectly suited for creating chic co-ord sets, contemporary kurtas, and structured dresses for both casual and semi-formal occasions. Fabric needed per garment Garment Fabric needed Recommended quality Why Trousers 2.5 – 2.5 m Poly Rayon (90–110 GSM) weight so the wide leg falls straight without clinging Full fabric requirement chart This design is printed to order on any of our 17 base cloths, so it can be cut for far more than the garments above. Fabric quantities below are at 44 inch width. Fabric needed for 37 garment types — womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 – 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 – 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 – 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 – 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 – 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 – 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 – 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 – 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 – 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 – 3.5 m Poly Crepe one-piece cut Dress 3.0 – 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 – 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 – 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 – 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 – 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 – 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 – 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 – 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 – 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 – 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 – 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 – 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 – 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 – 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4–8 Kids Kurta 1.5 m Poly Muslin age 4–8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 – 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Specifications Design code 617 Primary colour Terracotta Rust Full palette Terracotta Rust, Sage Green, Ivory Cream, Dusty Beige, Walnut Brown Pattern Geometric Print scale Medium Aesthetic Contemporary Fusion Mood Earthy & Grounded Suitable garments Trousers Fabric options 17 bases listed online; 100+ qualities available on request Base families Viscose, cotton, polyester, nylon, nylon-cotton, polyester-cotton Width 44 inch standard; 54 inch on request Price range Rs249 – Rs649 per metre Minimum order From 1 metre; flexible wholesale minimums Off-catalogue base MOQ 100 metres Printing High-definition digital print, wash-fast Production Made to order — customisable Dispatch Within 1 week from Surat, Gujarat Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Bulk pricing 7 metres and above — 10% off 26 metres and above — 15% off 50 metres and above — 20% off 100 metres and above — 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Trousers — 2.5 – 2.5 m (all at 44 inch width). The full chart on this page also covers menswear — men's shirt 2.0–2.5 m, men's kurta 2.5–3.0 m, kurta pyjama set 4.0–4.5 m, Nehru jacket 1.5–2.0 m, sherwani 3.5–4.0 m — plus kids wear and home furnishing. Can this print be used for menswear? Yes. The same artwork prints on all 17 base cloths, so it can be cut for men's shirts, resort shirts, kurtas, kurta pyjama sets, Nehru jackets, bandgalas and bomber jackets. Poly Muslin and Cotton Cambric are the usual choices for men's shirting; Poly Linen Satin for structured jackets. Which fabric quality should I choose? for a trousers, Poly Rayon. All 17 qualities carry the same artwork, so you can order any base cloth in this design. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers — contact us for mill-direct bulk rates. Note that 1 unit = 0.5 metres. An off-catalogue fabric base is the one exception: those start at 100 metres. Can design 617 be printed in another colour? Yes. This geometric design can be recoloured to any Pantone shade on request, with no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. We hold over 100 fabric qualities in total. Only our 17 highest-volume, most-trending bases are listed on the website — the full range covers viscose bases, cotton bases, polyester bases, nylon, nylon-cotton blends and polyester-cotton blends. If you need a specific base for your brand, message us on WhatsApp at +91 99588 03184 and we will quote it mill-direct. Minimum order for an off-catalogue base is 100 metres, and it needs extra lead time, so plan the order in advance. Which fabric base families can this design be printed on? Viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton — over 100 qualities across those families. The same artwork can be printed on any of them. The 17 shown on this page are the bases we run at scale and keep ready for quick production; anything outside that list is made to order at 100 metres minimum. Is this fabric ready stock or made to order? All Clothwala fabric is made to order. Nothing is pre-made stock — we print each order specially for you, which means the design can be customised to your requirement: a different colourway, a larger or smaller print scale, or your own artwork printed on any of our 17 base cloths. How long does delivery take? We dispatch within one week of order confirmation. Transit time after dispatch depends on your courier and where you are located in India, so total delivery time varies by destination. Contact us on info@clothwala.com for a delivery estimate for your city. Is the print colour-fast? Yes. High-definition wash-fast inks are used. OEKO-TEX compliant fabric options are available for export orders. Need a fabric base not listed here? We hold 100+ qualities across viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp or email info@clothwala.com — mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

Lilac Purple ethnic digital print fabric, sold by the metre in 17 fabric qualities from Rs249 per metre. Suitable for Kurti. Available from 1 metre with flexible wholesale minimums and bulk tiers. Made to order at our Surat mill and dispatched within one week. About this print A charming digital print featuring horizontal bands of pixelated, Fair Isle-inspired geometric motifs in a soft palette of lilac purple and peach sorbet against crisp white. This design embodies the 'Modern Ethnic' trend, creating a mood that is both cozy and contemporary, reminiscent of digital folklore. It is perfect for creating stylish co-ord sets, contemporary kurtas, or playful dresses for casual outings and creative workspaces. Fabric needed per garment Garment Fabric needed Recommended quality Why Kurti 2.5 m Poly Crepe (80–95 GSM) body and breathability for everyday wear Full fabric requirement chart This design is printed to order on any of our 17 base cloths, so it can be cut for far more than the garments above. Fabric quantities below are at 44 inch width. Fabric needed for 37 garment types — womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 – 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 – 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 – 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 – 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 – 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 – 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 – 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 – 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 – 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 – 3.5 m Poly Crepe one-piece cut Dress 3.0 – 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 – 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 – 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 – 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 – 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 – 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 – 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 – 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 – 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 – 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 – 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 – 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 – 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 – 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4–8 Kids Kurta 1.5 m Poly Muslin age 4–8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 – 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Specifications Design code 615 Primary colour Lilac Purple Full palette Lilac Purple, Peach Sorbet, Pastel Pink, Crisp White Pattern Ethnic Print scale Medium Aesthetic Contemporary Fusion Mood Playful & Fun Suitable garments Kurti Fabric options 17 bases listed online; 100+ qualities available on request Base families Viscose, cotton, polyester, nylon, nylon-cotton, polyester-cotton Width 44 inch standard; 54 inch on request Price range Rs249 – Rs649 per metre Minimum order From 1 metre; flexible wholesale minimums Off-catalogue base MOQ 100 metres Printing High-definition digital print, wash-fast Production Made to order — customisable Dispatch Within 1 week from Surat, Gujarat Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Bulk pricing 7 metres and above — 10% off 26 metres and above — 15% off 50 metres and above — 20% off 100 metres and above — 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Kurti — 2.5 m (all at 44 inch width). The full chart on this page also covers menswear — men's shirt 2.0–2.5 m, men's kurta 2.5–3.0 m, kurta pyjama set 4.0–4.5 m, Nehru jacket 1.5–2.0 m, sherwani 3.5–4.0 m — plus kids wear and home furnishing. Can this print be used for menswear? Yes. The same artwork prints on all 17 base cloths, so it can be cut for men's shirts, resort shirts, kurtas, kurta pyjama sets, Nehru jackets, bandgalas and bomber jackets. Poly Muslin and Cotton Cambric are the usual choices for men's shirting; Poly Linen Satin for structured jackets. Which fabric quality should I choose? for a kurti, Poly Crepe. All 17 qualities carry the same artwork, so you can order any base cloth in this design. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers — contact us for mill-direct bulk rates. Note that 1 unit = 0.5 metres. An off-catalogue fabric base is the one exception: those start at 100 metres. Can design 615 be printed in another colour? Yes. This ethnic design can be recoloured to any Pantone shade on request, with no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. We hold over 100 fabric qualities in total. Only our 17 highest-volume, most-trending bases are listed on the website — the full range covers viscose bases, cotton bases, polyester bases, nylon, nylon-cotton blends and polyester-cotton blends. If you need a specific base for your brand, message us on WhatsApp at +91 99588 03184 and we will quote it mill-direct. Minimum order for an off-catalogue base is 100 metres, and it needs extra lead time, so plan the order in advance. Which fabric base families can this design be printed on? Viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton — over 100 qualities across those families. The same artwork can be printed on any of them. The 17 shown on this page are the bases we run at scale and keep ready for quick production; anything outside that list is made to order at 100 metres minimum. Is this fabric ready stock or made to order? All Clothwala fabric is made to order. Nothing is pre-made stock — we print each order specially for you, which means the design can be customised to your requirement: a different colourway, a larger or smaller print scale, or your own artwork printed on any of our 17 base cloths. How long does delivery take? We dispatch within one week of order confirmation. Transit time after dispatch depends on your courier and where you are located in India, so total delivery time varies by destination. Contact us on info@clothwala.com for a delivery estimate for your city. Is the print colour-fast? Yes. High-definition wash-fast inks are used. OEKO-TEX compliant fabric options are available for export orders. Need a fabric base not listed here? We hold 100+ qualities across viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp or email info@clothwala.com — mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

Candy Pink geometric digital print fabric, sold by the metre in 17 fabric qualities from Rs249 per metre. Suitable for Co-ord Set. Available from 1 metre with flexible wholesale minimums and bulk tiers. Made to order at our Surat mill and dispatched within one week. About this print This dynamic print features a pixelated stripe pattern, creating a digital mosaic effect with a warm gradient of candy pink, tangerine orange, and peach nectar, highlighted by bright white squares. It embodies a Y2K-inspired, techno-chic trend, exuding a vibrant and playful mood. Perfect for creating statement co-ord sets, contemporary kaftans, or trendy shirts, this fabric is ideal for casual outings and vacation wear. Fabric needed per garment Garment Fabric needed Recommended quality Why Co-ord Set 3.0 – 3.5 m Poly Crepe (80–95 GSM) a stable, low-stretch hand so top and bottom hang as a matched set Full fabric requirement chart This design is printed to order on any of our 17 base cloths, so it can be cut for far more than the garments above. Fabric quantities below are at 44 inch width. Fabric needed for 37 garment types — womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 – 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 – 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 – 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 – 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 – 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 – 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 – 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 – 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 – 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 – 3.5 m Poly Crepe one-piece cut Dress 3.0 – 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 – 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 – 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 – 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 – 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 – 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 – 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 – 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 – 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 – 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 – 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 – 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 – 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 – 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4–8 Kids Kurta 1.5 m Poly Muslin age 4–8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 – 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Specifications Design code 614 Primary colour Candy Pink Full palette Candy Pink, Flamingo Pink, Tangerine Orange, Peach Nectar, Bright White Pattern Geometric Print scale Medium Aesthetic Contemporary Fusion Mood Playful & Fun Suitable garments Co-ord Set Fabric options 17 bases listed online; 100+ qualities available on request Base families Viscose, cotton, polyester, nylon, nylon-cotton, polyester-cotton Width 44 inch standard; 54 inch on request Price range Rs249 – Rs649 per metre Minimum order From 1 metre; flexible wholesale minimums Off-catalogue base MOQ 100 metres Printing High-definition digital print, wash-fast Production Made to order — customisable Dispatch Within 1 week from Surat, Gujarat Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Bulk pricing 7 metres and above — 10% off 26 metres and above — 15% off 50 metres and above — 20% off 100 metres and above — 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Co-ord Set — 3.0 – 3.5 m (all at 44 inch width). The full chart on this page also covers menswear — men's shirt 2.0–2.5 m, men's kurta 2.5–3.0 m, kurta pyjama set 4.0–4.5 m, Nehru jacket 1.5–2.0 m, sherwani 3.5–4.0 m — plus kids wear and home furnishing. Can this print be used for menswear? Yes. The same artwork prints on all 17 base cloths, so it can be cut for men's shirts, resort shirts, kurtas, kurta pyjama sets, Nehru jackets, bandgalas and bomber jackets. Poly Muslin and Cotton Cambric are the usual choices for men's shirting; Poly Linen Satin for structured jackets. Which fabric quality should I choose? for a co-ord set, Poly Crepe. All 17 qualities carry the same artwork, so you can order any base cloth in this design. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers — contact us for mill-direct bulk rates. Note that 1 unit = 0.5 metres. An off-catalogue fabric base is the one exception: those start at 100 metres. Can design 614 be printed in another colour? Yes. This geometric design can be recoloured to any Pantone shade on request, with no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. We hold over 100 fabric qualities in total. Only our 17 highest-volume, most-trending bases are listed on the website — the full range covers viscose bases, cotton bases, polyester bases, nylon, nylon-cotton blends and polyester-cotton blends. If you need a specific base for your brand, message us on WhatsApp at +91 99588 03184 and we will quote it mill-direct. Minimum order for an off-catalogue base is 100 metres, and it needs extra lead time, so plan the order in advance. Which fabric base families can this design be printed on? Viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton — over 100 qualities across those families. The same artwork can be printed on any of them. The 17 shown on this page are the bases we run at scale and keep ready for quick production; anything outside that list is made to order at 100 metres minimum. Is this fabric ready stock or made to order? All Clothwala fabric is made to order. Nothing is pre-made stock — we print each order specially for you, which means the design can be customised to your requirement: a different colourway, a larger or smaller print scale, or your own artwork printed on any of our 17 base cloths. How long does delivery take? We dispatch within one week of order confirmation. Transit time after dispatch depends on your courier and where you are located in India, so total delivery time varies by destination. Contact us on info@clothwala.com for a delivery estimate for your city. Is the print colour-fast? Yes. High-definition wash-fast inks are used. OEKO-TEX compliant fabric options are available for export orders. Need a fabric base not listed here? We hold 100+ qualities across viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp or email info@clothwala.com — mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

Charcoal Grey geometric digital print fabric, sold by the metre in 17 fabric qualities from Rs249 per metre. Suitable for Jumpsuit. Available from 1 metre with flexible wholesale minimums and bulk tiers. Made to order at our Surat mill and dispatched within one week. About this print This print features vertical columns of stacked, pixelated chevron motifs in a sophisticated palette of charcoal grey, slate blue, ivory, and jet black. It embodies a Modern Ethnic trend, specifically the Distorted Ikat Revival, creating a dark and dramatic mood. This versatile fabric is ideal for crafting contemporary kurtas, structured blazers, and co-ord sets for both smart casual and evening wear. Fabric needed per garment Garment Fabric needed Recommended quality Why Jumpsuit 3.0 – 3.5 m Poly Crepe (80–95 GSM) a stable hand that holds shape through a one-piece cut Full fabric requirement chart This design is printed to order on any of our 17 base cloths, so it can be cut for far more than the garments above. Fabric quantities below are at 44 inch width. Fabric needed for 37 garment types — womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 – 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 – 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 – 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 – 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 – 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 – 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 – 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 – 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 – 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 – 3.5 m Poly Crepe one-piece cut Dress 3.0 – 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 – 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 – 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 – 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 – 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 – 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 – 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 – 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 – 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 – 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 – 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 – 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 – 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 – 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4–8 Kids Kurta 1.5 m Poly Muslin age 4–8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 – 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Specifications Design code 613 Primary colour Charcoal Grey Full palette Charcoal Grey, Slate Blue, Ivory White, Jet Black, Silver Grey Pattern Geometric Print scale Fine Aesthetic Contemporary Fusion Mood Dark & Dramatic | Craft Inspiration: Ikat Suitable garments Jumpsuit Fabric options 17 bases listed online; 100+ qualities available on request Base families Viscose, cotton, polyester, nylon, nylon-cotton, polyester-cotton Width 44 inch standard; 54 inch on request Price range Rs249 – Rs649 per metre Minimum order From 1 metre; flexible wholesale minimums Off-catalogue base MOQ 100 metres Printing High-definition digital print, wash-fast Production Made to order — customisable Dispatch Within 1 week from Surat, Gujarat Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Bulk pricing 7 metres and above — 10% off 26 metres and above — 15% off 50 metres and above — 20% off 100 metres and above — 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Jumpsuit — 3.0 – 3.5 m (all at 44 inch width). The full chart on this page also covers menswear — men's shirt 2.0–2.5 m, men's kurta 2.5–3.0 m, kurta pyjama set 4.0–4.5 m, Nehru jacket 1.5–2.0 m, sherwani 3.5–4.0 m — plus kids wear and home furnishing. Can this print be used for menswear? Yes. The same artwork prints on all 17 base cloths, so it can be cut for men's shirts, resort shirts, kurtas, kurta pyjama sets, Nehru jackets, bandgalas and bomber jackets. Poly Muslin and Cotton Cambric are the usual choices for men's shirting; Poly Linen Satin for structured jackets. Which fabric quality should I choose? for a jumpsuit, Poly Crepe. All 17 qualities carry the same artwork, so you can order any base cloth in this design. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers — contact us for mill-direct bulk rates. Note that 1 unit = 0.5 metres. An off-catalogue fabric base is the one exception: those start at 100 metres. Can design 613 be printed in another colour? Yes. This geometric design can be recoloured to any Pantone shade on request, with no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. We hold over 100 fabric qualities in total. Only our 17 highest-volume, most-trending bases are listed on the website — the full range covers viscose bases, cotton bases, polyester bases, nylon, nylon-cotton blends and polyester-cotton blends. If you need a specific base for your brand, message us on WhatsApp at +91 99588 03184 and we will quote it mill-direct. Minimum order for an off-catalogue base is 100 metres, and it needs extra lead time, so plan the order in advance. Which fabric base families can this design be printed on? Viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton — over 100 qualities across those families. The same artwork can be printed on any of them. The 17 shown on this page are the bases we run at scale and keep ready for quick production; anything outside that list is made to order at 100 metres minimum. Is this fabric ready stock or made to order? All Clothwala fabric is made to order. Nothing is pre-made stock — we print each order specially for you, which means the design can be customised to your requirement: a different colourway, a larger or smaller print scale, or your own artwork printed on any of our 17 base cloths. How long does delivery take? We dispatch within one week of order confirmation. Transit time after dispatch depends on your courier and where you are located in India, so total delivery time varies by destination. Contact us on info@clothwala.com for a delivery estimate for your city. Is the print colour-fast? Yes. High-definition wash-fast inks are used. OEKO-TEX compliant fabric options are available for export orders. Need a fabric base not listed here? We hold 100+ qualities across viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp or email info@clothwala.com — mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

Jet Black geometric digital print fabric, sold by the metre in 17 fabric qualities from Rs249 per metre. Suitable for Saree Blouse. Available from 1 metre with flexible wholesale minimums and bulk tiers. Made to order at our Surat mill and dispatched within one week. About this print This striking print features a dense, all-over collage of intricate geometric tiles and stylized snowflake motifs in a high-contrast palette of jet black, optic white, and shades of charcoal. It embodies a 'Digital Folklore' trend, creating a mood that is both modern and intricately detailed, with a dark, dramatic edge. This versatile fabric is perfect for creating statement co-ord sets, contemporary kurtas, and sharp blazers suitable for festive gatherings or chic evening events. Fabric needed per garment Garment Fabric needed Recommended quality Why Saree Blouse 1.0 m Poly Japanese Satin (90–110 GSM) a firm hand that holds a structured, fitted shape Full fabric requirement chart This design is printed to order on any of our 17 base cloths, so it can be cut for far more than the garments above. Fabric quantities below are at 44 inch width. Fabric needed for 37 garment types — womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 – 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 – 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 – 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 – 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 – 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 – 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 – 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 – 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 – 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 – 3.5 m Poly Crepe one-piece cut Dress 3.0 – 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 – 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 – 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 – 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 – 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 – 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 – 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 – 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 – 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 – 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 – 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 – 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 – 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 – 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4–8 Kids Kurta 1.5 m Poly Muslin age 4–8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 – 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Specifications Design code 612 Primary colour Jet Black Full palette Jet Black, Optic White, Charcoal, Slate Grey, Silver Pattern Geometric Print scale Fine Aesthetic Contemporary Fusion Mood Dark & Dramatic Suitable garments Saree Blouse Fabric options 17 bases listed online; 100+ qualities available on request Base families Viscose, cotton, polyester, nylon, nylon-cotton, polyester-cotton Width 44 inch standard; 54 inch on request Price range Rs249 – Rs649 per metre Minimum order From 1 metre; flexible wholesale minimums Off-catalogue base MOQ 100 metres Printing High-definition digital print, wash-fast Production Made to order — customisable Dispatch Within 1 week from Surat, Gujarat Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Bulk pricing 7 metres and above — 10% off 26 metres and above — 15% off 50 metres and above — 20% off 100 metres and above — 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Saree Blouse — 1.0 m (all at 44 inch width). The full chart on this page also covers menswear — men's shirt 2.0–2.5 m, men's kurta 2.5–3.0 m, kurta pyjama set 4.0–4.5 m, Nehru jacket 1.5–2.0 m, sherwani 3.5–4.0 m — plus kids wear and home furnishing. Can this print be used for menswear? Yes. The same artwork prints on all 17 base cloths, so it can be cut for men's shirts, resort shirts, kurtas, kurta pyjama sets, Nehru jackets, bandgalas and bomber jackets. Poly Muslin and Cotton Cambric are the usual choices for men's shirting; Poly Linen Satin for structured jackets. Which fabric quality should I choose? for a saree blouse, Poly Japanese Satin. All 17 qualities carry the same artwork, so you can order any base cloth in this design. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers — contact us for mill-direct bulk rates. Note that 1 unit = 0.5 metres. An off-catalogue fabric base is the one exception: those start at 100 metres. Can design 612 be printed in another colour? Yes. This geometric design can be recoloured to any Pantone shade on request, with no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. We hold over 100 fabric qualities in total. Only our 17 highest-volume, most-trending bases are listed on the website — the full range covers viscose bases, cotton bases, polyester bases, nylon, nylon-cotton blends and polyester-cotton blends. If you need a specific base for your brand, message us on WhatsApp at +91 99588 03184 and we will quote it mill-direct. Minimum order for an off-catalogue base is 100 metres, and it needs extra lead time, so plan the order in advance. Which fabric base families can this design be printed on? Viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton — over 100 qualities across those families. The same artwork can be printed on any of them. The 17 shown on this page are the bases we run at scale and keep ready for quick production; anything outside that list is made to order at 100 metres minimum. Is this fabric ready stock or made to order? All Clothwala fabric is made to order. Nothing is pre-made stock — we print each order specially for you, which means the design can be customised to your requirement: a different colourway, a larger or smaller print scale, or your own artwork printed on any of our 17 base cloths. How long does delivery take? We dispatch within one week of order confirmation. Transit time after dispatch depends on your courier and where you are located in India, so total delivery time varies by destination. Contact us on info@clothwala.com for a delivery estimate for your city. Is the print colour-fast? Yes. High-definition wash-fast inks are used. OEKO-TEX compliant fabric options are available for export orders. Need a fabric base not listed here? We hold 100+ qualities across viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp or email info@clothwala.com — mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

Cobalt Blue geometric digital print fabric, sold by the metre in 17 fabric qualities from Rs249 per metre. Suitable for Shirt. Available from 1 metre with flexible wholesale minimums and bulk tiers. Made to order at our Surat mill and dispatched within one week. About this print This print features an intricate mosaic of interlocking geometric tiles in a sophisticated palette of cobalt blue, sapphire, ivory white, and slate grey, creating a stunning three-dimensional effect. Embodying a modern ethnic trend, the design exudes a structured and contemporary mood. It is perfect for creating statement kurta sets, structured blazers, or chic co-ord sets suitable for both festive gatherings and stylish casual outings. Fabric needed per garment Garment Fabric needed Recommended quality Why Shirt 2.0 – 2.5 m Cotton Cambric (80–110 GSM) a crisp, stable hand that presses cleanly at collar and cuff Full fabric requirement chart This design is printed to order on any of our 17 base cloths, so it can be cut for far more than the garments above. Fabric quantities below are at 44 inch width. Fabric needed for 37 garment types — womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 – 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 – 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 – 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 – 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 – 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 – 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 – 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 – 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 – 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 – 3.5 m Poly Crepe one-piece cut Dress 3.0 – 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 – 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 – 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 – 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 – 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 – 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 – 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 – 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 – 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 – 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 – 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 – 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 – 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 – 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4–8 Kids Kurta 1.5 m Poly Muslin age 4–8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 – 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Specifications Design code 611 Primary colour Cobalt Blue Full palette Cobalt Blue, Ivory White, Slate Grey, Sky Blue, Sapphire Pattern Geometric Print scale Medium Aesthetic Contemporary Fusion Mood Elegant & Refined Suitable garments Shirt Fabric options 17 bases listed online; 100+ qualities available on request Base families Viscose, cotton, polyester, nylon, nylon-cotton, polyester-cotton Width 44 inch standard; 54 inch on request Price range Rs249 – Rs649 per metre Minimum order From 1 metre; flexible wholesale minimums Off-catalogue base MOQ 100 metres Printing High-definition digital print, wash-fast Production Made to order — customisable Dispatch Within 1 week from Surat, Gujarat Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Bulk pricing 7 metres and above — 10% off 26 metres and above — 15% off 50 metres and above — 20% off 100 metres and above — 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Shirt — 2.0 – 2.5 m (all at 44 inch width). The full chart on this page also covers menswear — men's shirt 2.0–2.5 m, men's kurta 2.5–3.0 m, kurta pyjama set 4.0–4.5 m, Nehru jacket 1.5–2.0 m, sherwani 3.5–4.0 m — plus kids wear and home furnishing. Can this print be used for menswear? Yes. The same artwork prints on all 17 base cloths, so it can be cut for men's shirts, resort shirts, kurtas, kurta pyjama sets, Nehru jackets, bandgalas and bomber jackets. Poly Muslin and Cotton Cambric are the usual choices for men's shirting; Poly Linen Satin for structured jackets. Which fabric quality should I choose? for a shirt, Cotton Cambric. All 17 qualities carry the same artwork, so you can order any base cloth in this design. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers — contact us for mill-direct bulk rates. Note that 1 unit = 0.5 metres. An off-catalogue fabric base is the one exception: those start at 100 metres. Can design 611 be printed in another colour? Yes. This geometric design can be recoloured to any Pantone shade on request, with no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. We hold over 100 fabric qualities in total. Only our 17 highest-volume, most-trending bases are listed on the website — the full range covers viscose bases, cotton bases, polyester bases, nylon, nylon-cotton blends and polyester-cotton blends. If you need a specific base for your brand, message us on WhatsApp at +91 99588 03184 and we will quote it mill-direct. Minimum order for an off-catalogue base is 100 metres, and it needs extra lead time, so plan the order in advance. Which fabric base families can this design be printed on? Viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton — over 100 qualities across those families. The same artwork can be printed on any of them. The 17 shown on this page are the bases we run at scale and keep ready for quick production; anything outside that list is made to order at 100 metres minimum. Is this fabric ready stock or made to order? All Clothwala fabric is made to order. Nothing is pre-made stock — we print each order specially for you, which means the design can be customised to your requirement: a different colourway, a larger or smaller print scale, or your own artwork printed on any of our 17 base cloths. How long does delivery take? We dispatch within one week of order confirmation. Transit time after dispatch depends on your courier and where you are located in India, so total delivery time varies by destination. Contact us on info@clothwala.com for a delivery estimate for your city. Is the print colour-fast? Yes. High-definition wash-fast inks are used. OEKO-TEX compliant fabric options are available for export orders. Need a fabric base not listed here? We hold 100+ qualities across viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp or email info@clothwala.com — mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

Cobalt Blue geometric digital print fabric, sold by the metre in 17 fabric qualities from Rs249 per metre. Suitable for Maxi Dress. Available from 1 metre with flexible wholesale minimums and bulk tiers. Made to order at our Surat mill and dispatched within one week. About this print This intricate print features a tessellated pattern of interlocking geometric motifs, including stars and squares, rendered in a sophisticated palette of cobalt blue, cerulean, and ivory cream. It embodies a Modern Ethnic trend, exuding a mood that is both structured and artistically rich, reminiscent of traditional tilework. This versatile fabric is perfect for creating statement kurta sets, contemporary kaftans, or sharp co-ord sets suitable for both casual outings and festive gatherings. Fabric needed per garment Garment Fabric needed Recommended quality Why Maxi Dress 3.0 – 3.5 m Poly Georgette (70–90 GSM) fluid drape that carries a full-length silhouette without stiffness Full fabric requirement chart This design is printed to order on any of our 17 base cloths, so it can be cut for far more than the garments above. Fabric quantities below are at 44 inch width. Fabric needed for 37 garment types — womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 – 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 – 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 – 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 – 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 – 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 – 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 – 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 – 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 – 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 – 3.5 m Poly Crepe one-piece cut Dress 3.0 – 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 – 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 – 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 – 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 – 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 – 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 – 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 – 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 – 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 – 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 – 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 – 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 – 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 – 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4–8 Kids Kurta 1.5 m Poly Muslin age 4–8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 – 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Specifications Design code 610 Primary colour Cobalt Blue Full palette cobalt blue, cerulean blue, powder blue, ivory cream, slate gray Pattern Geometric Print scale Medium Aesthetic Contemporary Fusion Mood Elegant & Refined | Craft Inspiration: Ajrakh Suitable garments Maxi Dress Fabric options 17 bases listed online; 100+ qualities available on request Base families Viscose, cotton, polyester, nylon, nylon-cotton, polyester-cotton Width 44 inch standard; 54 inch on request Price range Rs249 – Rs649 per metre Minimum order From 1 metre; flexible wholesale minimums Off-catalogue base MOQ 100 metres Printing High-definition digital print, wash-fast Production Made to order — customisable Dispatch Within 1 week from Surat, Gujarat Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Bulk pricing 7 metres and above — 10% off 26 metres and above — 15% off 50 metres and above — 20% off 100 metres and above — 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Maxi Dress — 3.0 – 3.5 m (all at 44 inch width). The full chart on this page also covers menswear — men's shirt 2.0–2.5 m, men's kurta 2.5–3.0 m, kurta pyjama set 4.0–4.5 m, Nehru jacket 1.5–2.0 m, sherwani 3.5–4.0 m — plus kids wear and home furnishing. Can this print be used for menswear? Yes. The same artwork prints on all 17 base cloths, so it can be cut for men's shirts, resort shirts, kurtas, kurta pyjama sets, Nehru jackets, bandgalas and bomber jackets. Poly Muslin and Cotton Cambric are the usual choices for men's shirting; Poly Linen Satin for structured jackets. Which fabric quality should I choose? for a maxi dress, Poly Georgette. All 17 qualities carry the same artwork, so you can order any base cloth in this design. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers — contact us for mill-direct bulk rates. Note that 1 unit = 0.5 metres. An off-catalogue fabric base is the one exception: those start at 100 metres. Can design 610 be printed in another colour? Yes. This geometric design can be recoloured to any Pantone shade on request, with no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. We hold over 100 fabric qualities in total. Only our 17 highest-volume, most-trending bases are listed on the website — the full range covers viscose bases, cotton bases, polyester bases, nylon, nylon-cotton blends and polyester-cotton blends. If you need a specific base for your brand, message us on WhatsApp at +91 99588 03184 and we will quote it mill-direct. Minimum order for an off-catalogue base is 100 metres, and it needs extra lead time, so plan the order in advance. Which fabric base families can this design be printed on? Viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton — over 100 qualities across those families. The same artwork can be printed on any of them. The 17 shown on this page are the bases we run at scale and keep ready for quick production; anything outside that list is made to order at 100 metres minimum. Is this fabric ready stock or made to order? All Clothwala fabric is made to order. Nothing is pre-made stock — we print each order specially for you, which means the design can be customised to your requirement: a different colourway, a larger or smaller print scale, or your own artwork printed on any of our 17 base cloths. How long does delivery take? We dispatch within one week of order confirmation. Transit time after dispatch depends on your courier and where you are located in India, so total delivery time varies by destination. Contact us on info@clothwala.com for a delivery estimate for your city. Is the print colour-fast? Yes. High-definition wash-fast inks are used. OEKO-TEX compliant fabric options are available for export orders. Need a fabric base not listed here? We hold 100+ qualities across viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp or email info@clothwala.com — mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

Cobalt Blue geometric digital print fabric, sold by the metre in 17 fabric qualities from Rs249 per metre. Suitable for Kurta Set. Available from 1 metre with flexible wholesale minimums and bulk tiers. Made to order at our Surat mill and dispatched within one week. About this print A captivating all-over print featuring interlocking geometric motifs in a cool palette of cobalt blue, sky blue, and cerulean, accented with ivory cream and a subtle distressed texture. This design embodies the Modern Ethnic trend, creating a mood that is both structured and artistically bohemian. It is perfectly suited for creating statement kaftans, contemporary kurta sets, and chic co-ords for casual outings or resort wear. Fabric needed per garment Garment Fabric needed Recommended quality Why Kurta Set 3.5 – 4.0 m Poly Muslin (70–90 GSM) body with breathability, since kurta and bottom are cut from one piece Full fabric requirement chart This design is printed to order on any of our 17 base cloths, so it can be cut for far more than the garments above. Fabric quantities below are at 44 inch width. Fabric needed for 37 garment types — womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 – 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 – 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 – 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 – 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 – 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 – 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 – 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 – 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 – 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 – 3.5 m Poly Crepe one-piece cut Dress 3.0 – 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 – 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 – 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 – 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 – 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 – 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 – 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 – 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 – 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 – 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 – 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 – 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 – 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 – 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4–8 Kids Kurta 1.5 m Poly Muslin age 4–8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 – 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Specifications Design code 609 Primary colour Cobalt Blue Full palette Cobalt Blue, Sky Blue, Cerulean Blue, Ivory Cream, Silver Grey Pattern Geometric Print scale Medium Aesthetic Tribal Folk Mood Earthy & Grounded | Craft Inspiration: Ikat Suitable garments Kurta Set Fabric options 17 bases listed online; 100+ qualities available on request Base families Viscose, cotton, polyester, nylon, nylon-cotton, polyester-cotton Width 44 inch standard; 54 inch on request Price range Rs249 – Rs649 per metre Minimum order From 1 metre; flexible wholesale minimums Off-catalogue base MOQ 100 metres Printing High-definition digital print, wash-fast Production Made to order — customisable Dispatch Within 1 week from Surat, Gujarat Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Bulk pricing 7 metres and above — 10% off 26 metres and above — 15% off 50 metres and above — 20% off 100 metres and above — 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Kurta Set — 3.5 – 4.0 m (all at 44 inch width). The full chart on this page also covers menswear — men's shirt 2.0–2.5 m, men's kurta 2.5–3.0 m, kurta pyjama set 4.0–4.5 m, Nehru jacket 1.5–2.0 m, sherwani 3.5–4.0 m — plus kids wear and home furnishing. Can this print be used for menswear? Yes. The same artwork prints on all 17 base cloths, so it can be cut for men's shirts, resort shirts, kurtas, kurta pyjama sets, Nehru jackets, bandgalas and bomber jackets. Poly Muslin and Cotton Cambric are the usual choices for men's shirting; Poly Linen Satin for structured jackets. Which fabric quality should I choose? for a kurta set, Poly Muslin. All 17 qualities carry the same artwork, so you can order any base cloth in this design. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers — contact us for mill-direct bulk rates. Note that 1 unit = 0.5 metres. An off-catalogue fabric base is the one exception: those start at 100 metres. Can design 609 be printed in another colour? Yes. This geometric design can be recoloured to any Pantone shade on request, with no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. We hold over 100 fabric qualities in total. Only our 17 highest-volume, most-trending bases are listed on the website — the full range covers viscose bases, cotton bases, polyester bases, nylon, nylon-cotton blends and polyester-cotton blends. If you need a specific base for your brand, message us on WhatsApp at +91 99588 03184 and we will quote it mill-direct. Minimum order for an off-catalogue base is 100 metres, and it needs extra lead time, so plan the order in advance. Which fabric base families can this design be printed on? Viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton — over 100 qualities across those families. The same artwork can be printed on any of them. The 17 shown on this page are the bases we run at scale and keep ready for quick production; anything outside that list is made to order at 100 metres minimum. Is this fabric ready stock or made to order? All Clothwala fabric is made to order. Nothing is pre-made stock — we print each order specially for you, which means the design can be customised to your requirement: a different colourway, a larger or smaller print scale, or your own artwork printed on any of our 17 base cloths. How long does delivery take? We dispatch within one week of order confirmation. Transit time after dispatch depends on your courier and where you are located in India, so total delivery time varies by destination. Contact us on info@clothwala.com for a delivery estimate for your city. Is the print colour-fast? Yes. High-definition wash-fast inks are used. OEKO-TEX compliant fabric options are available for export orders. Need a fabric base not listed here? We hold 100+ qualities across viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp or email info@clothwala.com — mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less