GEOMETRIC PRINTS

Fiery Orange abstract digital print fabric, sold by the metre in 17 fabric qualities from Rs249 per metre. Suitable for Co-ord Set. Available from 1 metre with flexible wholesale minimums and bulk tiers. Made to order at our Surat mill and dispatched within one week. About this print This dynamic print features a pixelated mosaic of fiery orange, saffron yellow, and crimson red squares, overlaid with dramatic, shadowy drapes that create a stunning 3D illusion. Embodying a bold digital art trend, the design exudes a modern, edgy, and vibrant mood. This fabric is perfect for creating statement-making kaftans, contemporary co-ord sets, or unique blouses for parties and creative events. Fabric needed per garment Garment Fabric needed Recommended quality Why Co-ord Set 3.0 – 3.5 m Poly Crepe (80–95 GSM) a stable, low-stretch hand so top and bottom hang as a matched set Full fabric requirement chart This design is printed to order on any of our 17 base cloths, so it can be cut for far more than the garments above. Fabric quantities below are at 44 inch width. Fabric needed for 37 garment types — womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 – 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 – 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 – 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 – 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 – 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 – 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 – 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 – 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 – 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 – 3.5 m Poly Crepe one-piece cut Dress 3.0 – 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 – 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 – 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 – 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 – 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 – 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 – 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 – 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 – 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 – 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 – 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 – 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 – 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 – 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4–8 Kids Kurta 1.5 m Poly Muslin age 4–8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 – 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Specifications Design code 633 Primary colour Fiery Orange Full palette Fiery Orange, Saffron Yellow, Crimson Red, Ivory White, Charcoal Black Pattern Abstract Print scale Large Aesthetic Contemporary Fusion Mood Bold & Festive Suitable garments Co-ord Set Fabric options 17 bases listed online; 100+ qualities available on request Base families Viscose, cotton, polyester, nylon, nylon-cotton, polyester-cotton Width 44 inch standard; 54 inch on request Price range Rs249 – Rs649 per metre Minimum order From 1 metre; flexible wholesale minimums Off-catalogue base MOQ 100 metres Printing High-definition digital print, wash-fast Production Made to order — customisable Dispatch Within 1 week from Surat, Gujarat Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Bulk pricing 7 metres and above — 10% off 26 metres and above — 15% off 50 metres and above — 20% off 100 metres and above — 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Co-ord Set — 3.0 – 3.5 m (all at 44 inch width). The full chart on this page also covers menswear — men's shirt 2.0–2.5 m, men's kurta 2.5–3.0 m, kurta pyjama set 4.0–4.5 m, Nehru jacket 1.5–2.0 m, sherwani 3.5–4.0 m — plus kids wear and home furnishing. Can this print be used for menswear? Yes. The same artwork prints on all 17 base cloths, so it can be cut for men's shirts, resort shirts, kurtas, kurta pyjama sets, Nehru jackets, bandgalas and bomber jackets. Poly Muslin and Cotton Cambric are the usual choices for men's shirting; Poly Linen Satin for structured jackets. Which fabric quality should I choose? for a co-ord set, Poly Crepe. All 17 qualities carry the same artwork, so you can order any base cloth in this design. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers — contact us for mill-direct bulk rates. Note that 1 unit = 0.5 metres. An off-catalogue fabric base is the one exception: those start at 100 metres. Can design 633 be printed in another colour? Yes. This abstract design can be recoloured to any Pantone shade on request, with no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. We hold over 100 fabric qualities in total. Only our 17 highest-volume, most-trending bases are listed on the website — the full range covers viscose bases, cotton bases, polyester bases, nylon, nylon-cotton blends and polyester-cotton blends. If you need a specific base for your brand, message us on WhatsApp at +91 99588 03184 and we will quote it mill-direct. Minimum order for an off-catalogue base is 100 metres, and it needs extra lead time, so plan the order in advance. Which fabric base families can this design be printed on? Viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton — over 100 qualities across those families. The same artwork can be printed on any of them. The 17 shown on this page are the bases we run at scale and keep ready for quick production; anything outside that list is made to order at 100 metres minimum. Is this fabric ready stock or made to order? All Clothwala fabric is made to order. Nothing is pre-made stock — we print each order specially for you, which means the design can be customised to your requirement: a different colourway, a larger or smaller print scale, or your own artwork printed on any of our 17 base cloths. How long does delivery take? We dispatch within one week of order confirmation. Transit time after dispatch depends on your courier and where you are located in India, so total delivery time varies by destination. Contact us on info@clothwala.com for a delivery estimate for your city. Is the print colour-fast? Yes. High-definition wash-fast inks are used. OEKO-TEX compliant fabric options are available for export orders. Need a fabric base not listed here? We hold 100+ qualities across viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp or email info@clothwala.com — mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

Tangerine Orange geometric digital print fabric, sold by the metre in 17 fabric qualities from Rs249 per metre. Suitable for Kaftan. Available from 1 metre with flexible wholesale minimums and bulk tiers. Made to order at our Surat mill and dispatched within one week. About this print A vibrant digital mosaic of pixelated squares creates bold horizontal bands in contrasting shades of tangerine orange and cyan blue. This print embodies a modern, techno-geometric trend, creating an energetic and futuristic mood. It's perfect for creating statement co-ord sets, contemporary kurtas, and resort-wear kaftans for casual outings or vacations. Fabric needed per garment Garment Fabric needed Recommended quality Why Kaftan 2.5 – 3.0 m Poly Chiffon (60–80 GSM) a soft, breathable hand that moves loosely over the body Full fabric requirement chart This design is printed to order on any of our 17 base cloths, so it can be cut for far more than the garments above. Fabric quantities below are at 44 inch width. Fabric needed for 37 garment types — womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 – 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 – 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 – 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 – 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 – 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 – 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 – 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 – 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 – 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 – 3.5 m Poly Crepe one-piece cut Dress 3.0 – 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 – 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 – 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 – 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 – 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 – 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 – 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 – 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 – 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 – 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 – 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 – 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 – 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 – 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4–8 Kids Kurta 1.5 m Poly Muslin age 4–8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 – 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Specifications Design code 632 Primary colour Tangerine Orange Full palette Tangerine Orange, Cyan Blue, Marigold, Royal Blue, Optic White Pattern Geometric Print scale Fine Aesthetic Contemporary Fusion Mood Tropical & Vibrant Suitable garments Kaftan Fabric options 17 bases listed online; 100+ qualities available on request Base families Viscose, cotton, polyester, nylon, nylon-cotton, polyester-cotton Width 44 inch standard; 54 inch on request Price range Rs249 – Rs649 per metre Minimum order From 1 metre; flexible wholesale minimums Off-catalogue base MOQ 100 metres Printing High-definition digital print, wash-fast Production Made to order — customisable Dispatch Within 1 week from Surat, Gujarat Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Bulk pricing 7 metres and above — 10% off 26 metres and above — 15% off 50 metres and above — 20% off 100 metres and above — 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Kaftan — 2.5 – 3.0 m (all at 44 inch width). The full chart on this page also covers menswear — men's shirt 2.0–2.5 m, men's kurta 2.5–3.0 m, kurta pyjama set 4.0–4.5 m, Nehru jacket 1.5–2.0 m, sherwani 3.5–4.0 m — plus kids wear and home furnishing. Can this print be used for menswear? Yes. The same artwork prints on all 17 base cloths, so it can be cut for men's shirts, resort shirts, kurtas, kurta pyjama sets, Nehru jackets, bandgalas and bomber jackets. Poly Muslin and Cotton Cambric are the usual choices for men's shirting; Poly Linen Satin for structured jackets. Which fabric quality should I choose? for a kaftan, Poly Chiffon. All 17 qualities carry the same artwork, so you can order any base cloth in this design. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers — contact us for mill-direct bulk rates. Note that 1 unit = 0.5 metres. An off-catalogue fabric base is the one exception: those start at 100 metres. Can design 632 be printed in another colour? Yes. This geometric design can be recoloured to any Pantone shade on request, with no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. We hold over 100 fabric qualities in total. Only our 17 highest-volume, most-trending bases are listed on the website — the full range covers viscose bases, cotton bases, polyester bases, nylon, nylon-cotton blends and polyester-cotton blends. If you need a specific base for your brand, message us on WhatsApp at +91 99588 03184 and we will quote it mill-direct. Minimum order for an off-catalogue base is 100 metres, and it needs extra lead time, so plan the order in advance. Which fabric base families can this design be printed on? Viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton — over 100 qualities across those families. The same artwork can be printed on any of them. The 17 shown on this page are the bases we run at scale and keep ready for quick production; anything outside that list is made to order at 100 metres minimum. Is this fabric ready stock or made to order? All Clothwala fabric is made to order. Nothing is pre-made stock — we print each order specially for you, which means the design can be customised to your requirement: a different colourway, a larger or smaller print scale, or your own artwork printed on any of our 17 base cloths. How long does delivery take? We dispatch within one week of order confirmation. Transit time after dispatch depends on your courier and where you are located in India, so total delivery time varies by destination. Contact us on info@clothwala.com for a delivery estimate for your city. Is the print colour-fast? Yes. High-definition wash-fast inks are used. OEKO-TEX compliant fabric options are available for export orders. Need a fabric base not listed here? We hold 100+ qualities across viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp or email info@clothwala.com — mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

Cobalt Blue geometric digital print fabric, sold by the metre in 17 fabric qualities from Rs249 per metre. Suitable for Saree. Available from 1 metre with flexible wholesale minimums and bulk tiers. Made to order at our Surat mill and dispatched within one week. About this print This dynamic print features a pixelated chevron pattern rendered in a striking palette of cobalt blue, tangerine orange, and optic white. It embodies a modern digital aesthetic, creating a mood that is both energetic and contemporary, reminiscent of the Distorted Ikat Revival trend. Perfect for creating statement co-ord sets, contemporary kurtas, or vibrant maxi dresses, this fabric is ideal for casual outings and trendy events. Fabric needed per garment Garment Fabric needed Recommended quality Why Saree 5.5 – 6.5 m Poly Chiffon (60–80 GSM) lightness and fall so the pleats and pallu sit correctly Full fabric requirement chart This design is printed to order on any of our 17 base cloths, so it can be cut for far more than the garments above. Fabric quantities below are at 44 inch width. Fabric needed for 37 garment types — womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 – 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 – 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 – 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 – 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 – 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 – 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 – 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 – 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 – 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 – 3.5 m Poly Crepe one-piece cut Dress 3.0 – 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 – 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 – 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 – 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 – 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 – 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 – 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 – 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 – 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 – 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 – 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 – 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 – 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 – 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4–8 Kids Kurta 1.5 m Poly Muslin age 4–8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 – 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Specifications Design code 631 Primary colour Cobalt Blue Full palette Cobalt Blue, Tangerine Orange, Sky Blue, Optic White, Slate Grey Pattern Geometric Print scale Medium Aesthetic Contemporary Fusion Mood Bold & Festive | Craft Inspiration: Ikat Suitable garments Saree Fabric options 17 bases listed online; 100+ qualities available on request Base families Viscose, cotton, polyester, nylon, nylon-cotton, polyester-cotton Width 44 inch standard; 54 inch on request Price range Rs249 – Rs649 per metre Minimum order From 1 metre; flexible wholesale minimums Off-catalogue base MOQ 100 metres Printing High-definition digital print, wash-fast Production Made to order — customisable Dispatch Within 1 week from Surat, Gujarat Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Bulk pricing 7 metres and above — 10% off 26 metres and above — 15% off 50 metres and above — 20% off 100 metres and above — 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Saree — 5.5 – 6.5 m (all at 44 inch width). The full chart on this page also covers menswear — men's shirt 2.0–2.5 m, men's kurta 2.5–3.0 m, kurta pyjama set 4.0–4.5 m, Nehru jacket 1.5–2.0 m, sherwani 3.5–4.0 m — plus kids wear and home furnishing. Can this print be used for menswear? Yes. The same artwork prints on all 17 base cloths, so it can be cut for men's shirts, resort shirts, kurtas, kurta pyjama sets, Nehru jackets, bandgalas and bomber jackets. Poly Muslin and Cotton Cambric are the usual choices for men's shirting; Poly Linen Satin for structured jackets. Which fabric quality should I choose? for a saree, Poly Chiffon. All 17 qualities carry the same artwork, so you can order any base cloth in this design. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers — contact us for mill-direct bulk rates. Note that 1 unit = 0.5 metres. An off-catalogue fabric base is the one exception: those start at 100 metres. Can design 631 be printed in another colour? Yes. This geometric design can be recoloured to any Pantone shade on request, with no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. We hold over 100 fabric qualities in total. Only our 17 highest-volume, most-trending bases are listed on the website — the full range covers viscose bases, cotton bases, polyester bases, nylon, nylon-cotton blends and polyester-cotton blends. If you need a specific base for your brand, message us on WhatsApp at +91 99588 03184 and we will quote it mill-direct. Minimum order for an off-catalogue base is 100 metres, and it needs extra lead time, so plan the order in advance. Which fabric base families can this design be printed on? Viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton — over 100 qualities across those families. The same artwork can be printed on any of them. The 17 shown on this page are the bases we run at scale and keep ready for quick production; anything outside that list is made to order at 100 metres minimum. Is this fabric ready stock or made to order? All Clothwala fabric is made to order. Nothing is pre-made stock — we print each order specially for you, which means the design can be customised to your requirement: a different colourway, a larger or smaller print scale, or your own artwork printed on any of our 17 base cloths. How long does delivery take? We dispatch within one week of order confirmation. Transit time after dispatch depends on your courier and where you are located in India, so total delivery time varies by destination. Contact us on info@clothwala.com for a delivery estimate for your city. Is the print colour-fast? Yes. High-definition wash-fast inks are used. OEKO-TEX compliant fabric options are available for export orders. Need a fabric base not listed here? We hold 100+ qualities across viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp or email info@clothwala.com — mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

Sunset Orange geometric digital print fabric, sold by the metre in 17 fabric qualities from Rs249 per metre. Suitable for Palazzo Pants. Available from 1 metre with flexible wholesale minimums and bulk tiers. Made to order at our Surat mill and dispatched within one week. About this print A dynamic all-over print featuring a pixelated chevron pattern that creates a stunning 3D illusion, rendered in a vibrant gradient of sunset orange, golden yellow, and cool azure blues. This design embodies a contemporary digital art trend, projecting an energetic, modern, and visually captivating mood. Perfect for creating statement-making co-ord sets, modern kurtas, and flowing kaftans for resort getaways or trendy casual events. Fabric needed per garment Garment Fabric needed Recommended quality Why Palazzo Pants 2.5 – 2.5 m Poly Rayon (90–110 GSM) weight and fall so the wide leg holds its column Full fabric requirement chart This design is printed to order on any of our 17 base cloths, so it can be cut for far more than the garments above. Fabric quantities below are at 44 inch width. Fabric needed for 37 garment types — womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 – 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 – 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 – 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 – 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 – 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 – 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 – 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 – 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 – 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 – 3.5 m Poly Crepe one-piece cut Dress 3.0 – 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 – 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 – 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 – 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 – 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 – 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 – 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 – 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 – 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 – 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 – 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 – 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 – 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 – 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4–8 Kids Kurta 1.5 m Poly Muslin age 4–8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 – 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Specifications Design code 630 Primary colour Sunset Orange Full palette Sunset Orange, Azure Blue, Golden Yellow, Teal, Cool Grey Pattern Geometric Print scale Medium Aesthetic Contemporary Fusion Mood Bold & Festive Suitable garments Palazzo Pants Fabric options 17 bases listed online; 100+ qualities available on request Base families Viscose, cotton, polyester, nylon, nylon-cotton, polyester-cotton Width 44 inch standard; 54 inch on request Price range Rs249 – Rs649 per metre Minimum order From 1 metre; flexible wholesale minimums Off-catalogue base MOQ 100 metres Printing High-definition digital print, wash-fast Production Made to order — customisable Dispatch Within 1 week from Surat, Gujarat Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Bulk pricing 7 metres and above — 10% off 26 metres and above — 15% off 50 metres and above — 20% off 100 metres and above — 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Palazzo Pants — 2.5 – 2.5 m (all at 44 inch width). The full chart on this page also covers menswear — men's shirt 2.0–2.5 m, men's kurta 2.5–3.0 m, kurta pyjama set 4.0–4.5 m, Nehru jacket 1.5–2.0 m, sherwani 3.5–4.0 m — plus kids wear and home furnishing. Can this print be used for menswear? Yes. The same artwork prints on all 17 base cloths, so it can be cut for men's shirts, resort shirts, kurtas, kurta pyjama sets, Nehru jackets, bandgalas and bomber jackets. Poly Muslin and Cotton Cambric are the usual choices for men's shirting; Poly Linen Satin for structured jackets. Which fabric quality should I choose? for a palazzo pants, Poly Rayon. All 17 qualities carry the same artwork, so you can order any base cloth in this design. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers — contact us for mill-direct bulk rates. Note that 1 unit = 0.5 metres. An off-catalogue fabric base is the one exception: those start at 100 metres. Can design 630 be printed in another colour? Yes. This geometric design can be recoloured to any Pantone shade on request, with no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. We hold over 100 fabric qualities in total. Only our 17 highest-volume, most-trending bases are listed on the website — the full range covers viscose bases, cotton bases, polyester bases, nylon, nylon-cotton blends and polyester-cotton blends. If you need a specific base for your brand, message us on WhatsApp at +91 99588 03184 and we will quote it mill-direct. Minimum order for an off-catalogue base is 100 metres, and it needs extra lead time, so plan the order in advance. Which fabric base families can this design be printed on? Viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton — over 100 qualities across those families. The same artwork can be printed on any of them. The 17 shown on this page are the bases we run at scale and keep ready for quick production; anything outside that list is made to order at 100 metres minimum. Is this fabric ready stock or made to order? All Clothwala fabric is made to order. Nothing is pre-made stock — we print each order specially for you, which means the design can be customised to your requirement: a different colourway, a larger or smaller print scale, or your own artwork printed on any of our 17 base cloths. How long does delivery take? We dispatch within one week of order confirmation. Transit time after dispatch depends on your courier and where you are located in India, so total delivery time varies by destination. Contact us on info@clothwala.com for a delivery estimate for your city. Is the print colour-fast? Yes. High-definition wash-fast inks are used. OEKO-TEX compliant fabric options are available for export orders. Need a fabric base not listed here? We hold 100+ qualities across viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp or email info@clothwala.com — mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

Tangerine geometric digital print fabric, sold by the metre in 17 fabric qualities from Rs249 per metre. Suitable for Kurta Set. Available from 1 metre with flexible wholesale minimums and bulk tiers. Made to order at our Surat mill and dispatched within one week. About this print A vibrant mosaic of pixelated squares unfolds in a warm palette of tangerine, vermilion, and lemon yellow, punctuated by cool bursts of cyan. This print embodies a modern digital art trend, creating a mood that is both energetic and artistically expressive. Perfect for creating statement-making kaftans, contemporary kurta sets, and chic co-ords, this fabric is ideal for resort holidays and creative events. Fabric needed per garment Garment Fabric needed Recommended quality Why Kurta Set 3.5 – 4.0 m Poly Muslin (70–90 GSM) body with breathability, since kurta and bottom are cut from one piece Full fabric requirement chart This design is printed to order on any of our 17 base cloths, so it can be cut for far more than the garments above. Fabric quantities below are at 44 inch width. Fabric needed for 37 garment types — womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 – 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 – 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 – 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 – 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 – 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 – 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 – 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 – 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 – 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 – 3.5 m Poly Crepe one-piece cut Dress 3.0 – 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 – 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 – 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 – 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 – 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 – 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 – 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 – 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 – 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 – 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 – 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 – 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 – 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 – 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4–8 Kids Kurta 1.5 m Poly Muslin age 4–8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 – 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Specifications Design code 629 Primary colour Tangerine Full palette Tangerine, Vermilion, Lemon Yellow, Cyan, Marigold, Ivory White Pattern Geometric Print scale Fine Aesthetic Contemporary Fusion Mood Tropical & Vibrant Suitable garments Kurta Set Fabric options 17 bases listed online; 100+ qualities available on request Base families Viscose, cotton, polyester, nylon, nylon-cotton, polyester-cotton Width 44 inch standard; 54 inch on request Price range Rs249 – Rs649 per metre Minimum order From 1 metre; flexible wholesale minimums Off-catalogue base MOQ 100 metres Printing High-definition digital print, wash-fast Production Made to order — customisable Dispatch Within 1 week from Surat, Gujarat Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Bulk pricing 7 metres and above — 10% off 26 metres and above — 15% off 50 metres and above — 20% off 100 metres and above — 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Kurta Set — 3.5 – 4.0 m (all at 44 inch width). The full chart on this page also covers menswear — men's shirt 2.0–2.5 m, men's kurta 2.5–3.0 m, kurta pyjama set 4.0–4.5 m, Nehru jacket 1.5–2.0 m, sherwani 3.5–4.0 m — plus kids wear and home furnishing. Can this print be used for menswear? Yes. The same artwork prints on all 17 base cloths, so it can be cut for men's shirts, resort shirts, kurtas, kurta pyjama sets, Nehru jackets, bandgalas and bomber jackets. Poly Muslin and Cotton Cambric are the usual choices for men's shirting; Poly Linen Satin for structured jackets. Which fabric quality should I choose? for a kurta set, Poly Muslin. All 17 qualities carry the same artwork, so you can order any base cloth in this design. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers — contact us for mill-direct bulk rates. Note that 1 unit = 0.5 metres. An off-catalogue fabric base is the one exception: those start at 100 metres. Can design 629 be printed in another colour? Yes. This geometric design can be recoloured to any Pantone shade on request, with no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. We hold over 100 fabric qualities in total. Only our 17 highest-volume, most-trending bases are listed on the website — the full range covers viscose bases, cotton bases, polyester bases, nylon, nylon-cotton blends and polyester-cotton blends. If you need a specific base for your brand, message us on WhatsApp at +91 99588 03184 and we will quote it mill-direct. Minimum order for an off-catalogue base is 100 metres, and it needs extra lead time, so plan the order in advance. Which fabric base families can this design be printed on? Viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton — over 100 qualities across those families. The same artwork can be printed on any of them. The 17 shown on this page are the bases we run at scale and keep ready for quick production; anything outside that list is made to order at 100 metres minimum. Is this fabric ready stock or made to order? All Clothwala fabric is made to order. Nothing is pre-made stock — we print each order specially for you, which means the design can be customised to your requirement: a different colourway, a larger or smaller print scale, or your own artwork printed on any of our 17 base cloths. How long does delivery take? We dispatch within one week of order confirmation. Transit time after dispatch depends on your courier and where you are located in India, so total delivery time varies by destination. Contact us on info@clothwala.com for a delivery estimate for your city. Is the print colour-fast? Yes. High-definition wash-fast inks are used. OEKO-TEX compliant fabric options are available for export orders. Need a fabric base not listed here? We hold 100+ qualities across viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp or email info@clothwala.com — mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

Tangerine Orange abstract digital print fabric, sold by the metre in 17 fabric qualities from Rs249 per metre. Suitable for Maxi Dress. Available from 1 metre with flexible wholesale minimums and bulk tiers. Made to order at our Surat mill and dispatched within one week. About this print A dynamic all-over print features a mosaic of digital pixels in a fiery palette of paprika, tangerine, and soft apricot, accented with cream highlights. This design embodies the 'Digital Glitch' trend, creating a bold, energetic, and futuristic mood. It is perfect for creating statement co-ord sets, contemporary kurtas, or flowy kaftans for trendy casual outings or resort wear. Fabric needed per garment Garment Fabric needed Recommended quality Why Maxi Dress 3.0 – 3.5 m Poly Georgette (70–90 GSM) fluid drape that carries a full-length silhouette without stiffness Full fabric requirement chart This design is printed to order on any of our 17 base cloths, so it can be cut for far more than the garments above. Fabric quantities below are at 44 inch width. Fabric needed for 37 garment types — womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 – 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 – 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 – 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 – 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 – 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 – 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 – 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 – 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 – 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 – 3.5 m Poly Crepe one-piece cut Dress 3.0 – 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 – 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 – 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 – 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 – 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 – 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 – 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 – 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 – 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 – 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 – 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 – 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 – 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 – 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4–8 Kids Kurta 1.5 m Poly Muslin age 4–8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 – 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Specifications Design code 628 Primary colour Tangerine Orange Full palette Paprika, Tangerine, Apricot, Cream, Burnt Umber Pattern Abstract Print scale Medium Aesthetic Contemporary Fusion Mood Bold & Festive Suitable garments Maxi Dress Fabric options 17 bases listed online; 100+ qualities available on request Base families Viscose, cotton, polyester, nylon, nylon-cotton, polyester-cotton Width 44 inch standard; 54 inch on request Price range Rs249 – Rs649 per metre Minimum order From 1 metre; flexible wholesale minimums Off-catalogue base MOQ 100 metres Printing High-definition digital print, wash-fast Production Made to order — customisable Dispatch Within 1 week from Surat, Gujarat Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Bulk pricing 7 metres and above — 10% off 26 metres and above — 15% off 50 metres and above — 20% off 100 metres and above — 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Maxi Dress — 3.0 – 3.5 m (all at 44 inch width). The full chart on this page also covers menswear — men's shirt 2.0–2.5 m, men's kurta 2.5–3.0 m, kurta pyjama set 4.0–4.5 m, Nehru jacket 1.5–2.0 m, sherwani 3.5–4.0 m — plus kids wear and home furnishing. Can this print be used for menswear? Yes. The same artwork prints on all 17 base cloths, so it can be cut for men's shirts, resort shirts, kurtas, kurta pyjama sets, Nehru jackets, bandgalas and bomber jackets. Poly Muslin and Cotton Cambric are the usual choices for men's shirting; Poly Linen Satin for structured jackets. Which fabric quality should I choose? for a maxi dress, Poly Georgette. All 17 qualities carry the same artwork, so you can order any base cloth in this design. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers — contact us for mill-direct bulk rates. Note that 1 unit = 0.5 metres. An off-catalogue fabric base is the one exception: those start at 100 metres. Can design 628 be printed in another colour? Yes. This abstract design can be recoloured to any Pantone shade on request, with no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. We hold over 100 fabric qualities in total. Only our 17 highest-volume, most-trending bases are listed on the website — the full range covers viscose bases, cotton bases, polyester bases, nylon, nylon-cotton blends and polyester-cotton blends. If you need a specific base for your brand, message us on WhatsApp at +91 99588 03184 and we will quote it mill-direct. Minimum order for an off-catalogue base is 100 metres, and it needs extra lead time, so plan the order in advance. Which fabric base families can this design be printed on? Viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton — over 100 qualities across those families. The same artwork can be printed on any of them. The 17 shown on this page are the bases we run at scale and keep ready for quick production; anything outside that list is made to order at 100 metres minimum. Is this fabric ready stock or made to order? All Clothwala fabric is made to order. Nothing is pre-made stock — we print each order specially for you, which means the design can be customised to your requirement: a different colourway, a larger or smaller print scale, or your own artwork printed on any of our 17 base cloths. How long does delivery take? We dispatch within one week of order confirmation. Transit time after dispatch depends on your courier and where you are located in India, so total delivery time varies by destination. Contact us on info@clothwala.com for a delivery estimate for your city. Is the print colour-fast? Yes. High-definition wash-fast inks are used. OEKO-TEX compliant fabric options are available for export orders. Need a fabric base not listed here? We hold 100+ qualities across viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp or email info@clothwala.com — mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

Charcoal Grey geometric digital print fabric, sold by the metre in 17 fabric qualities from Rs249 per metre. Suitable for Structured Trousers. Available from 1 metre with flexible wholesale minimums and bulk tiers. Made to order at our Surat mill and dispatched within one week. About this print A sophisticated all-over print featuring a complex tessellation of three-dimensional cubes and blocks in a monochromatic palette of charcoal grey, jet black, and slate. This design embodies a futuristic, architectural trend, creating a mood that is both urban-chic and intellectually sharp. It is perfect for creating structured contemporary garments like modern kurtas, tailored blazers, or statement trousers for formal or evening occasions. Fabric needed per garment Garment Fabric needed Recommended quality Why Structured Trousers 3.0 – 3.5 m Poly Georgette (70–90 GSM) drape that holds a clean silhouette without stiffness Full fabric requirement chart This design is printed to order on any of our 17 base cloths, so it can be cut for far more than the garments above. Fabric quantities below are at 44 inch width. Fabric needed for 37 garment types — womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 – 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 – 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 – 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 – 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 – 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 – 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 – 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 – 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 – 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 – 3.5 m Poly Crepe one-piece cut Dress 3.0 – 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 – 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 – 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 – 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 – 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 – 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 – 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 – 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 – 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 – 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 – 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 – 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 – 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 – 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4–8 Kids Kurta 1.5 m Poly Muslin age 4–8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 – 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Specifications Design code 627 Primary colour Charcoal Grey Full palette Charcoal Grey, Jet Black, Slate Grey, Graphite, Silver Pattern Geometric Print scale Medium Aesthetic Contemporary Fusion Mood Dark & Dramatic Suitable garments Structured Trousers Fabric options 17 bases listed online; 100+ qualities available on request Base families Viscose, cotton, polyester, nylon, nylon-cotton, polyester-cotton Width 44 inch standard; 54 inch on request Price range Rs249 – Rs649 per metre Minimum order From 1 metre; flexible wholesale minimums Off-catalogue base MOQ 100 metres Printing High-definition digital print, wash-fast Production Made to order — customisable Dispatch Within 1 week from Surat, Gujarat Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Bulk pricing 7 metres and above — 10% off 26 metres and above — 15% off 50 metres and above — 20% off 100 metres and above — 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Structured Trousers — 3.0 – 3.5 m (all at 44 inch width). The full chart on this page also covers menswear — men's shirt 2.0–2.5 m, men's kurta 2.5–3.0 m, kurta pyjama set 4.0–4.5 m, Nehru jacket 1.5–2.0 m, sherwani 3.5–4.0 m — plus kids wear and home furnishing. Can this print be used for menswear? Yes. The same artwork prints on all 17 base cloths, so it can be cut for men's shirts, resort shirts, kurtas, kurta pyjama sets, Nehru jackets, bandgalas and bomber jackets. Poly Muslin and Cotton Cambric are the usual choices for men's shirting; Poly Linen Satin for structured jackets. Which fabric quality should I choose? for a structured trousers, Poly Georgette. All 17 qualities carry the same artwork, so you can order any base cloth in this design. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers — contact us for mill-direct bulk rates. Note that 1 unit = 0.5 metres. An off-catalogue fabric base is the one exception: those start at 100 metres. Can design 627 be printed in another colour? Yes. This geometric design can be recoloured to any Pantone shade on request, with no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. We hold over 100 fabric qualities in total. Only our 17 highest-volume, most-trending bases are listed on the website — the full range covers viscose bases, cotton bases, polyester bases, nylon, nylon-cotton blends and polyester-cotton blends. If you need a specific base for your brand, message us on WhatsApp at +91 99588 03184 and we will quote it mill-direct. Minimum order for an off-catalogue base is 100 metres, and it needs extra lead time, so plan the order in advance. Which fabric base families can this design be printed on? Viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton — over 100 qualities across those families. The same artwork can be printed on any of them. The 17 shown on this page are the bases we run at scale and keep ready for quick production; anything outside that list is made to order at 100 metres minimum. Is this fabric ready stock or made to order? All Clothwala fabric is made to order. Nothing is pre-made stock — we print each order specially for you, which means the design can be customised to your requirement: a different colourway, a larger or smaller print scale, or your own artwork printed on any of our 17 base cloths. How long does delivery take? We dispatch within one week of order confirmation. Transit time after dispatch depends on your courier and where you are located in India, so total delivery time varies by destination. Contact us on info@clothwala.com for a delivery estimate for your city. Is the print colour-fast? Yes. High-definition wash-fast inks are used. OEKO-TEX compliant fabric options are available for export orders. Need a fabric base not listed here? We hold 100+ qualities across viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp or email info@clothwala.com — mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

Charcoal Grey geometric digital print fabric, sold by the metre in 17 fabric qualities from Rs249 per metre. Suitable for Co-ord Set. Available from 1 metre with flexible wholesale minimums and bulk tiers. Made to order at our Surat mill and dispatched within one week. About this print A sophisticated mosaic of interlocking geometric blocks is rendered in a stark monochromatic palette of jet black, charcoal, silver, and ash grey, creating a textured, architectural surface. This print embodies a modern, urban-chic trend, exuding a mood that is both edgy and elegantly refined. It is perfect for creating statement co-ord sets, contemporary kurtas, or structured dresses suitable for formal events or an upscale casual setting. Fabric needed per garment Garment Fabric needed Recommended quality Why Co-ord Set 3.0 – 3.5 m Poly Crepe (80–95 GSM) a stable, low-stretch hand so top and bottom hang as a matched set Full fabric requirement chart This design is printed to order on any of our 17 base cloths, so it can be cut for far more than the garments above. Fabric quantities below are at 44 inch width. Fabric needed for 37 garment types — womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 – 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 – 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 – 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 – 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 – 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 – 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 – 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 – 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 – 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 – 3.5 m Poly Crepe one-piece cut Dress 3.0 – 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 – 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 – 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 – 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 – 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 – 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 – 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 – 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 – 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 – 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 – 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 – 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 – 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 – 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4–8 Kids Kurta 1.5 m Poly Muslin age 4–8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 – 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Specifications Design code 626 Primary colour Charcoal Grey Full palette Jet Black, Charcoal Grey, Slate Grey, Silver, Ash Grey, Off-White Pattern Geometric Print scale Medium Aesthetic Contemporary Fusion Mood Elegant & Refined Suitable garments Co-ord Set Fabric options 17 bases listed online; 100+ qualities available on request Base families Viscose, cotton, polyester, nylon, nylon-cotton, polyester-cotton Width 44 inch standard; 54 inch on request Price range Rs249 – Rs649 per metre Minimum order From 1 metre; flexible wholesale minimums Off-catalogue base MOQ 100 metres Printing High-definition digital print, wash-fast Production Made to order — customisable Dispatch Within 1 week from Surat, Gujarat Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Bulk pricing 7 metres and above — 10% off 26 metres and above — 15% off 50 metres and above — 20% off 100 metres and above — 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Co-ord Set — 3.0 – 3.5 m (all at 44 inch width). The full chart on this page also covers menswear — men's shirt 2.0–2.5 m, men's kurta 2.5–3.0 m, kurta pyjama set 4.0–4.5 m, Nehru jacket 1.5–2.0 m, sherwani 3.5–4.0 m — plus kids wear and home furnishing. Can this print be used for menswear? Yes. The same artwork prints on all 17 base cloths, so it can be cut for men's shirts, resort shirts, kurtas, kurta pyjama sets, Nehru jackets, bandgalas and bomber jackets. Poly Muslin and Cotton Cambric are the usual choices for men's shirting; Poly Linen Satin for structured jackets. Which fabric quality should I choose? for a co-ord set, Poly Crepe. All 17 qualities carry the same artwork, so you can order any base cloth in this design. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers — contact us for mill-direct bulk rates. Note that 1 unit = 0.5 metres. An off-catalogue fabric base is the one exception: those start at 100 metres. Can design 626 be printed in another colour? Yes. This geometric design can be recoloured to any Pantone shade on request, with no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. We hold over 100 fabric qualities in total. Only our 17 highest-volume, most-trending bases are listed on the website — the full range covers viscose bases, cotton bases, polyester bases, nylon, nylon-cotton blends and polyester-cotton blends. If you need a specific base for your brand, message us on WhatsApp at +91 99588 03184 and we will quote it mill-direct. Minimum order for an off-catalogue base is 100 metres, and it needs extra lead time, so plan the order in advance. Which fabric base families can this design be printed on? Viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton — over 100 qualities across those families. The same artwork can be printed on any of them. The 17 shown on this page are the bases we run at scale and keep ready for quick production; anything outside that list is made to order at 100 metres minimum. Is this fabric ready stock or made to order? All Clothwala fabric is made to order. Nothing is pre-made stock — we print each order specially for you, which means the design can be customised to your requirement: a different colourway, a larger or smaller print scale, or your own artwork printed on any of our 17 base cloths. How long does delivery take? We dispatch within one week of order confirmation. Transit time after dispatch depends on your courier and where you are located in India, so total delivery time varies by destination. Contact us on info@clothwala.com for a delivery estimate for your city. Is the print colour-fast? Yes. High-definition wash-fast inks are used. OEKO-TEX compliant fabric options are available for export orders. Need a fabric base not listed here? We hold 100+ qualities across viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp or email info@clothwala.com — mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

Charcoal Grey geometric digital print fabric, sold by the metre in 17 fabric qualities from Rs249 per metre. Suitable for Saree Blouse. Available from 1 metre with flexible wholesale minimums and bulk tiers. Made to order at our Surat mill and dispatched within one week. About this print A sophisticated digital mosaic features tilted squares in a monochromatic palette of charcoal grey, jet black, and slate, accented with glints of silver white. This print embodies a modern, techno-geometric trend, creating a mood that is both urban chic and subtly futuristic. Perfect for creating structured co-ord sets, contemporary kurtas, and sharp blazers, this fabric is ideal for formal or evening wear. Fabric needed per garment Garment Fabric needed Recommended quality Why Saree Blouse 1.0 m Poly Japanese Satin (90–110 GSM) a firm hand that holds a structured, fitted shape Full fabric requirement chart This design is printed to order on any of our 17 base cloths, so it can be cut for far more than the garments above. Fabric quantities below are at 44 inch width. Fabric needed for 37 garment types — womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 – 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 – 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 – 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 – 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 – 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 – 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 – 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 – 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 – 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 – 3.5 m Poly Crepe one-piece cut Dress 3.0 – 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 – 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 – 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 – 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 – 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 – 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 – 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 – 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 – 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 – 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 – 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 – 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 – 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 – 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4–8 Kids Kurta 1.5 m Poly Muslin age 4–8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 – 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Specifications Design code 625 Primary colour Charcoal Grey Full palette Charcoal Grey, Slate Grey, Jet Black, Silver White, Graphite Pattern Geometric Print scale Fine Aesthetic Contemporary Fusion Mood Dark & Dramatic Suitable garments Saree Blouse Fabric options 17 bases listed online; 100+ qualities available on request Base families Viscose, cotton, polyester, nylon, nylon-cotton, polyester-cotton Width 44 inch standard; 54 inch on request Price range Rs249 – Rs649 per metre Minimum order From 1 metre; flexible wholesale minimums Off-catalogue base MOQ 100 metres Printing High-definition digital print, wash-fast Production Made to order — customisable Dispatch Within 1 week from Surat, Gujarat Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Bulk pricing 7 metres and above — 10% off 26 metres and above — 15% off 50 metres and above — 20% off 100 metres and above — 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Saree Blouse — 1.0 m (all at 44 inch width). The full chart on this page also covers menswear — men's shirt 2.0–2.5 m, men's kurta 2.5–3.0 m, kurta pyjama set 4.0–4.5 m, Nehru jacket 1.5–2.0 m, sherwani 3.5–4.0 m — plus kids wear and home furnishing. Can this print be used for menswear? Yes. The same artwork prints on all 17 base cloths, so it can be cut for men's shirts, resort shirts, kurtas, kurta pyjama sets, Nehru jackets, bandgalas and bomber jackets. Poly Muslin and Cotton Cambric are the usual choices for men's shirting; Poly Linen Satin for structured jackets. Which fabric quality should I choose? for a saree blouse, Poly Japanese Satin. All 17 qualities carry the same artwork, so you can order any base cloth in this design. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers — contact us for mill-direct bulk rates. Note that 1 unit = 0.5 metres. An off-catalogue fabric base is the one exception: those start at 100 metres. Can design 625 be printed in another colour? Yes. This geometric design can be recoloured to any Pantone shade on request, with no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. We hold over 100 fabric qualities in total. Only our 17 highest-volume, most-trending bases are listed on the website — the full range covers viscose bases, cotton bases, polyester bases, nylon, nylon-cotton blends and polyester-cotton blends. If you need a specific base for your brand, message us on WhatsApp at +91 99588 03184 and we will quote it mill-direct. Minimum order for an off-catalogue base is 100 metres, and it needs extra lead time, so plan the order in advance. Which fabric base families can this design be printed on? Viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton — over 100 qualities across those families. The same artwork can be printed on any of them. The 17 shown on this page are the bases we run at scale and keep ready for quick production; anything outside that list is made to order at 100 metres minimum. Is this fabric ready stock or made to order? All Clothwala fabric is made to order. Nothing is pre-made stock — we print each order specially for you, which means the design can be customised to your requirement: a different colourway, a larger or smaller print scale, or your own artwork printed on any of our 17 base cloths. How long does delivery take? We dispatch within one week of order confirmation. Transit time after dispatch depends on your courier and where you are located in India, so total delivery time varies by destination. Contact us on info@clothwala.com for a delivery estimate for your city. Is the print colour-fast? Yes. High-definition wash-fast inks are used. OEKO-TEX compliant fabric options are available for export orders. Need a fabric base not listed here? We hold 100+ qualities across viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp or email info@clothwala.com — mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

Slate Grey geometric digital print fabric, sold by the metre in 17 fabric qualities from Rs249 per metre. Suitable for Trousers. Available from 1 metre with flexible wholesale minimums and bulk tiers. Made to order at our Surat mill and dispatched within one week. About this print This intricate all-over print features a complex mosaic of interlocking geometric shapes in a sophisticated palette of charcoal grey, slate blue, ash, and ivory cream. Embodying a modern, architectural trend, the design projects an urban and refined mood. It is perfectly suited for creating contemporary kurtas, sharp co-ord sets, and statement-making formal shirts. Fabric needed per garment Garment Fabric needed Recommended quality Why Trousers 2.5 – 2.5 m Poly Rayon (90–110 GSM) weight so the wide leg falls straight without clinging Full fabric requirement chart This design is printed to order on any of our 17 base cloths, so it can be cut for far more than the garments above. Fabric quantities below are at 44 inch width. Fabric needed for 37 garment types — womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 – 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 – 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 – 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 – 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 – 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 – 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 – 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 – 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 – 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 – 3.5 m Poly Crepe one-piece cut Dress 3.0 – 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 – 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 – 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 – 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 – 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 – 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 – 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 – 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 – 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 – 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 – 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 – 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 – 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 – 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4–8 Kids Kurta 1.5 m Poly Muslin age 4–8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 – 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Specifications Design code 624 Primary colour Slate Grey Full palette Charcoal Grey, Slate Blue, Ash Grey, Silver Mist, Ivory Cream Pattern Geometric Print scale Medium Aesthetic Contemporary Fusion Mood Elegant & Refined Suitable garments Trousers Fabric options 17 bases listed online; 100+ qualities available on request Base families Viscose, cotton, polyester, nylon, nylon-cotton, polyester-cotton Width 44 inch standard; 54 inch on request Price range Rs249 – Rs649 per metre Minimum order From 1 metre; flexible wholesale minimums Off-catalogue base MOQ 100 metres Printing High-definition digital print, wash-fast Production Made to order — customisable Dispatch Within 1 week from Surat, Gujarat Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Bulk pricing 7 metres and above — 10% off 26 metres and above — 15% off 50 metres and above — 20% off 100 metres and above — 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Trousers — 2.5 – 2.5 m (all at 44 inch width). The full chart on this page also covers menswear — men's shirt 2.0–2.5 m, men's kurta 2.5–3.0 m, kurta pyjama set 4.0–4.5 m, Nehru jacket 1.5–2.0 m, sherwani 3.5–4.0 m — plus kids wear and home furnishing. Can this print be used for menswear? Yes. The same artwork prints on all 17 base cloths, so it can be cut for men's shirts, resort shirts, kurtas, kurta pyjama sets, Nehru jackets, bandgalas and bomber jackets. Poly Muslin and Cotton Cambric are the usual choices for men's shirting; Poly Linen Satin for structured jackets. Which fabric quality should I choose? for a trousers, Poly Rayon. All 17 qualities carry the same artwork, so you can order any base cloth in this design. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers — contact us for mill-direct bulk rates. Note that 1 unit = 0.5 metres. An off-catalogue fabric base is the one exception: those start at 100 metres. Can design 624 be printed in another colour? Yes. This geometric design can be recoloured to any Pantone shade on request, with no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. We hold over 100 fabric qualities in total. Only our 17 highest-volume, most-trending bases are listed on the website — the full range covers viscose bases, cotton bases, polyester bases, nylon, nylon-cotton blends and polyester-cotton blends. If you need a specific base for your brand, message us on WhatsApp at +91 99588 03184 and we will quote it mill-direct. Minimum order for an off-catalogue base is 100 metres, and it needs extra lead time, so plan the order in advance. Which fabric base families can this design be printed on? Viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton — over 100 qualities across those families. The same artwork can be printed on any of them. The 17 shown on this page are the bases we run at scale and keep ready for quick production; anything outside that list is made to order at 100 metres minimum. Is this fabric ready stock or made to order? All Clothwala fabric is made to order. Nothing is pre-made stock — we print each order specially for you, which means the design can be customised to your requirement: a different colourway, a larger or smaller print scale, or your own artwork printed on any of our 17 base cloths. How long does delivery take? We dispatch within one week of order confirmation. Transit time after dispatch depends on your courier and where you are located in India, so total delivery time varies by destination. Contact us on info@clothwala.com for a delivery estimate for your city. Is the print colour-fast? Yes. High-definition wash-fast inks are used. OEKO-TEX compliant fabric options are available for export orders. Need a fabric base not listed here? We hold 100+ qualities across viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp or email info@clothwala.com — mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

Charcoal Grey geometric digital print fabric, sold by the metre in 17 fabric qualities from Rs249 per metre. Suitable for Trousers. Available from 1 metre with flexible wholesale minimums and bulk tiers. Made to order at our Surat mill and dispatched within one week. About this print A complex network of interlocking, pixelated lines in a stark monochrome palette of jet black, charcoal, and optic white creates a dynamic, maze-like pattern. This print embodies a futuristic, techno-glitch trend, projecting an edgy and urban mood. It's perfect for creating statement co-ord sets, contemporary kurtas, and structured jackets for trendy, evening occasions. Fabric needed per garment Garment Fabric needed Recommended quality Why Trousers 2.5 – 2.5 m Poly Rayon (90–110 GSM) weight so the wide leg falls straight without clinging Full fabric requirement chart This design is printed to order on any of our 17 base cloths, so it can be cut for far more than the garments above. Fabric quantities below are at 44 inch width. Fabric needed for 37 garment types — womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 – 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 – 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 – 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 – 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 – 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 – 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 – 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 – 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 – 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 – 3.5 m Poly Crepe one-piece cut Dress 3.0 – 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 – 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 – 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 – 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 – 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 – 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 – 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 – 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 – 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 – 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 – 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 – 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 – 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 – 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4–8 Kids Kurta 1.5 m Poly Muslin age 4–8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 – 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Specifications Design code 623 Primary colour Charcoal Grey Full palette Jet Black, Charcoal Grey, Slate Grey, Silver, Optic White Pattern Geometric Print scale Medium Aesthetic Urban Street Mood Dark & Dramatic Suitable garments Trousers Fabric options 17 bases listed online; 100+ qualities available on request Base families Viscose, cotton, polyester, nylon, nylon-cotton, polyester-cotton Width 44 inch standard; 54 inch on request Price range Rs249 – Rs649 per metre Minimum order From 1 metre; flexible wholesale minimums Off-catalogue base MOQ 100 metres Printing High-definition digital print, wash-fast Production Made to order — customisable Dispatch Within 1 week from Surat, Gujarat Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Bulk pricing 7 metres and above — 10% off 26 metres and above — 15% off 50 metres and above — 20% off 100 metres and above — 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Trousers — 2.5 – 2.5 m (all at 44 inch width). The full chart on this page also covers menswear — men's shirt 2.0–2.5 m, men's kurta 2.5–3.0 m, kurta pyjama set 4.0–4.5 m, Nehru jacket 1.5–2.0 m, sherwani 3.5–4.0 m — plus kids wear and home furnishing. Can this print be used for menswear? Yes. The same artwork prints on all 17 base cloths, so it can be cut for men's shirts, resort shirts, kurtas, kurta pyjama sets, Nehru jackets, bandgalas and bomber jackets. Poly Muslin and Cotton Cambric are the usual choices for men's shirting; Poly Linen Satin for structured jackets. Which fabric quality should I choose? for a trousers, Poly Rayon. All 17 qualities carry the same artwork, so you can order any base cloth in this design. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers — contact us for mill-direct bulk rates. Note that 1 unit = 0.5 metres. An off-catalogue fabric base is the one exception: those start at 100 metres. Can design 623 be printed in another colour? Yes. This geometric design can be recoloured to any Pantone shade on request, with no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. We hold over 100 fabric qualities in total. Only our 17 highest-volume, most-trending bases are listed on the website — the full range covers viscose bases, cotton bases, polyester bases, nylon, nylon-cotton blends and polyester-cotton blends. If you need a specific base for your brand, message us on WhatsApp at +91 99588 03184 and we will quote it mill-direct. Minimum order for an off-catalogue base is 100 metres, and it needs extra lead time, so plan the order in advance. Which fabric base families can this design be printed on? Viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton — over 100 qualities across those families. The same artwork can be printed on any of them. The 17 shown on this page are the bases we run at scale and keep ready for quick production; anything outside that list is made to order at 100 metres minimum. Is this fabric ready stock or made to order? All Clothwala fabric is made to order. Nothing is pre-made stock — we print each order specially for you, which means the design can be customised to your requirement: a different colourway, a larger or smaller print scale, or your own artwork printed on any of our 17 base cloths. How long does delivery take? We dispatch within one week of order confirmation. Transit time after dispatch depends on your courier and where you are located in India, so total delivery time varies by destination. Contact us on info@clothwala.com for a delivery estimate for your city. Is the print colour-fast? Yes. High-definition wash-fast inks are used. OEKO-TEX compliant fabric options are available for export orders. Need a fabric base not listed here? We hold 100+ qualities across viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp or email info@clothwala.com — mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

Charcoal Grey geometric digital print fabric, sold by the metre in 17 fabric qualities from Rs249 per metre. Suitable for Tunic. Available from 1 metre with flexible wholesale minimums and bulk tiers. Made to order at our Surat mill and dispatched within one week. About this print This striking print features a complex, pixelated maze of interlocking lines and blocks in a sophisticated monochrome palette of jet black, charcoal, and slate grey. It embodies a futuristic, techno-dystopian trend, creating a mood that is edgy, modern, and intellectually stimulating. This fabric is perfect for creating statement co-ord sets, contemporary kurtas, or avant-garde dresses for urban, fashion-forward events. Fabric needed per garment Garment Fabric needed Recommended quality Why Tunic 2.0 – 2.5 m Poly Crepe (80–95 GSM) an easy hand that skims rather than clings Full fabric requirement chart This design is printed to order on any of our 17 base cloths, so it can be cut for far more than the garments above. Fabric quantities below are at 44 inch width. Fabric needed for 37 garment types — womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 – 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 – 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 – 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 – 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 – 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 – 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 – 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 – 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 – 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 – 3.5 m Poly Crepe one-piece cut Dress 3.0 – 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 – 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 – 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 – 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 – 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 – 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 – 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 – 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 – 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 – 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 – 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 – 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 – 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 – 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4–8 Kids Kurta 1.5 m Poly Muslin age 4–8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 – 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Specifications Design code 622 Primary colour Charcoal Grey Full palette Jet Black, Charcoal Grey, Slate Grey, Ash Grey, Silver Pattern Geometric Print scale Medium Aesthetic Urban Street Mood Dark & Dramatic Suitable garments Tunic Fabric options 17 bases listed online; 100+ qualities available on request Base families Viscose, cotton, polyester, nylon, nylon-cotton, polyester-cotton Width 44 inch standard; 54 inch on request Price range Rs249 – Rs649 per metre Minimum order From 1 metre; flexible wholesale minimums Off-catalogue base MOQ 100 metres Printing High-definition digital print, wash-fast Production Made to order — customisable Dispatch Within 1 week from Surat, Gujarat Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Bulk pricing 7 metres and above — 10% off 26 metres and above — 15% off 50 metres and above — 20% off 100 metres and above — 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Tunic — 2.0 – 2.5 m (all at 44 inch width). The full chart on this page also covers menswear — men's shirt 2.0–2.5 m, men's kurta 2.5–3.0 m, kurta pyjama set 4.0–4.5 m, Nehru jacket 1.5–2.0 m, sherwani 3.5–4.0 m — plus kids wear and home furnishing. Can this print be used for menswear? Yes. The same artwork prints on all 17 base cloths, so it can be cut for men's shirts, resort shirts, kurtas, kurta pyjama sets, Nehru jackets, bandgalas and bomber jackets. Poly Muslin and Cotton Cambric are the usual choices for men's shirting; Poly Linen Satin for structured jackets. Which fabric quality should I choose? for a tunic, Poly Crepe. All 17 qualities carry the same artwork, so you can order any base cloth in this design. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers — contact us for mill-direct bulk rates. Note that 1 unit = 0.5 metres. An off-catalogue fabric base is the one exception: those start at 100 metres. Can design 622 be printed in another colour? Yes. This geometric design can be recoloured to any Pantone shade on request, with no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. We hold over 100 fabric qualities in total. Only our 17 highest-volume, most-trending bases are listed on the website — the full range covers viscose bases, cotton bases, polyester bases, nylon, nylon-cotton blends and polyester-cotton blends. If you need a specific base for your brand, message us on WhatsApp at +91 99588 03184 and we will quote it mill-direct. Minimum order for an off-catalogue base is 100 metres, and it needs extra lead time, so plan the order in advance. Which fabric base families can this design be printed on? Viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton — over 100 qualities across those families. The same artwork can be printed on any of them. The 17 shown on this page are the bases we run at scale and keep ready for quick production; anything outside that list is made to order at 100 metres minimum. Is this fabric ready stock or made to order? All Clothwala fabric is made to order. Nothing is pre-made stock — we print each order specially for you, which means the design can be customised to your requirement: a different colourway, a larger or smaller print scale, or your own artwork printed on any of our 17 base cloths. How long does delivery take? We dispatch within one week of order confirmation. Transit time after dispatch depends on your courier and where you are located in India, so total delivery time varies by destination. Contact us on info@clothwala.com for a delivery estimate for your city. Is the print colour-fast? Yes. High-definition wash-fast inks are used. OEKO-TEX compliant fabric options are available for export orders. Need a fabric base not listed here? We hold 100+ qualities across viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp or email info@clothwala.com — mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less