PLACEMENT ETHNIC

Forest Green geometric digital print fabric, sold by the metre in 17 fabric qualities from Rs249 per metre. Suitable for Co-ord Set. Available from 1 metre with flexible wholesale minimums and bulk tiers. Made to order at our Surat mill and dispatched within one week. About this print This striking print features an intricate maze of interlocking rectangular and L-shaped blocks, rendered in a rich, painterly palette of forest green, burnt sienna, and ochre. Embodying a Modern Ethnic trend, the design exudes a sophisticated, earthy, and artistic mood. It is perfect for creating statement kaftans, contemporary kurta sets, and chic co-ord sets suitable for artistic gatherings or stylish casual outings. Fabric needed per garment Garment Fabric needed Recommended quality Why Co-ord Set 3.0 – 3.5 m Poly Crepe (80–95 GSM) a stable, low-stretch hand so top and bottom hang as a matched set Full fabric requirement chart This design is printed to order on any of our 17 base cloths, so it can be cut for far more than the garments above. Fabric quantities below are at 44 inch width. Fabric needed for 37 garment types — womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 – 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 – 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 – 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 – 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 – 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 – 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 – 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 – 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 – 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 – 3.5 m Poly Crepe one-piece cut Dress 3.0 – 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 – 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 – 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 – 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 – 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 – 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 – 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 – 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 – 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 – 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 – 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 – 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 – 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 – 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4–8 Kids Kurta 1.5 m Poly Muslin age 4–8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 – 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Specifications Design code 640 Primary colour Forest Green Full palette forest green, burnt sienna, ochre, moss green, terracotta, ecru Pattern Geometric Print scale Medium Aesthetic Contemporary Fusion Mood Earthy & Grounded | Craft Inspiration: Ikat Suitable garments Co-ord Set Fabric options 17 bases listed online; 100+ qualities available on request Base families Viscose, cotton, polyester, nylon, nylon-cotton, polyester-cotton Width 44 inch standard; 54 inch on request Price range Rs249 – Rs649 per metre Minimum order From 1 metre; flexible wholesale minimums Off-catalogue base MOQ 100 metres Printing High-definition digital print, wash-fast Production Made to order — customisable Dispatch Within 1 week from Surat, Gujarat Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Bulk pricing 7 metres and above — 10% off 26 metres and above — 15% off 50 metres and above — 20% off 100 metres and above — 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Co-ord Set — 3.0 – 3.5 m (all at 44 inch width). The full chart on this page also covers menswear — men's shirt 2.0–2.5 m, men's kurta 2.5–3.0 m, kurta pyjama set 4.0–4.5 m, Nehru jacket 1.5–2.0 m, sherwani 3.5–4.0 m — plus kids wear and home furnishing. Can this print be used for menswear? Yes. The same artwork prints on all 17 base cloths, so it can be cut for men's shirts, resort shirts, kurtas, kurta pyjama sets, Nehru jackets, bandgalas and bomber jackets. Poly Muslin and Cotton Cambric are the usual choices for men's shirting; Poly Linen Satin for structured jackets. Which fabric quality should I choose? for a co-ord set, Poly Crepe. All 17 qualities carry the same artwork, so you can order any base cloth in this design. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers — contact us for mill-direct bulk rates. Note that 1 unit = 0.5 metres. An off-catalogue fabric base is the one exception: those start at 100 metres. Can design 640 be printed in another colour? Yes. This geometric design can be recoloured to any Pantone shade on request, with no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. We hold over 100 fabric qualities in total. Only our 17 highest-volume, most-trending bases are listed on the website — the full range covers viscose bases, cotton bases, polyester bases, nylon, nylon-cotton blends and polyester-cotton blends. If you need a specific base for your brand, message us on WhatsApp at +91 99588 03184 and we will quote it mill-direct. Minimum order for an off-catalogue base is 100 metres, and it needs extra lead time, so plan the order in advance. Which fabric base families can this design be printed on? Viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton — over 100 qualities across those families. The same artwork can be printed on any of them. The 17 shown on this page are the bases we run at scale and keep ready for quick production; anything outside that list is made to order at 100 metres minimum. Is this fabric ready stock or made to order? All Clothwala fabric is made to order. Nothing is pre-made stock — we print each order specially for you, which means the design can be customised to your requirement: a different colourway, a larger or smaller print scale, or your own artwork printed on any of our 17 base cloths. How long does delivery take? We dispatch within one week of order confirmation. Transit time after dispatch depends on your courier and where you are located in India, so total delivery time varies by destination. Contact us on info@clothwala.com for a delivery estimate for your city. Is the print colour-fast? Yes. High-definition wash-fast inks are used. OEKO-TEX compliant fabric options are available for export orders. Need a fabric base not listed here? We hold 100+ qualities across viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp or email info@clothwala.com — mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

Teal Green geometric digital print fabric, sold by the metre in 17 fabric qualities from Rs249 per metre. Suitable for Co-ord Set. Available from 1 metre with flexible wholesale minimums and bulk tiers. Made to order at our Surat mill and dispatched within one week. About this print This captivating print features a textured, diagonal grid pattern reminiscent of woven tiles, rendered in a rich, painterly palette of teal green, burnt sienna, and mustard yellow. It embodies a modern, artistic trend, creating a sophisticated and dimensional mood with its embossed, 3D effect. Perfect for creating statement co-ord sets, structured tunics, or contemporary kurtas, this design elevates both casual and semi-formal ensembles. Fabric needed per garment Garment Fabric needed Recommended quality Why Co-ord Set 3.0 – 3.5 m Poly Crepe (80–95 GSM) a stable, low-stretch hand so top and bottom hang as a matched set Full fabric requirement chart This design is printed to order on any of our 17 base cloths, so it can be cut for far more than the garments above. Fabric quantities below are at 44 inch width. Fabric needed for 37 garment types — womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 – 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 – 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 – 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 – 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 – 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 – 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 – 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 – 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 – 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 – 3.5 m Poly Crepe one-piece cut Dress 3.0 – 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 – 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 – 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 – 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 – 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 – 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 – 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 – 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 – 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 – 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 – 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 – 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 – 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 – 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4–8 Kids Kurta 1.5 m Poly Muslin age 4–8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 – 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Specifications Design code 639 Primary colour Teal Green Full palette Teal Green, Burnt Sienna, Rust Red, Mustard Yellow, Charcoal Grey Pattern Geometric Print scale Medium Aesthetic Contemporary Fusion Mood Dark & Dramatic Suitable garments Co-ord Set Fabric options 17 bases listed online; 100+ qualities available on request Base families Viscose, cotton, polyester, nylon, nylon-cotton, polyester-cotton Width 44 inch standard; 54 inch on request Price range Rs249 – Rs649 per metre Minimum order From 1 metre; flexible wholesale minimums Off-catalogue base MOQ 100 metres Printing High-definition digital print, wash-fast Production Made to order — customisable Dispatch Within 1 week from Surat, Gujarat Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Bulk pricing 7 metres and above — 10% off 26 metres and above — 15% off 50 metres and above — 20% off 100 metres and above — 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Co-ord Set — 3.0 – 3.5 m (all at 44 inch width). The full chart on this page also covers menswear — men's shirt 2.0–2.5 m, men's kurta 2.5–3.0 m, kurta pyjama set 4.0–4.5 m, Nehru jacket 1.5–2.0 m, sherwani 3.5–4.0 m — plus kids wear and home furnishing. Can this print be used for menswear? Yes. The same artwork prints on all 17 base cloths, so it can be cut for men's shirts, resort shirts, kurtas, kurta pyjama sets, Nehru jackets, bandgalas and bomber jackets. Poly Muslin and Cotton Cambric are the usual choices for men's shirting; Poly Linen Satin for structured jackets. Which fabric quality should I choose? for a co-ord set, Poly Crepe. All 17 qualities carry the same artwork, so you can order any base cloth in this design. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers — contact us for mill-direct bulk rates. Note that 1 unit = 0.5 metres. An off-catalogue fabric base is the one exception: those start at 100 metres. Can design 639 be printed in another colour? Yes. This geometric design can be recoloured to any Pantone shade on request, with no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. We hold over 100 fabric qualities in total. Only our 17 highest-volume, most-trending bases are listed on the website — the full range covers viscose bases, cotton bases, polyester bases, nylon, nylon-cotton blends and polyester-cotton blends. If you need a specific base for your brand, message us on WhatsApp at +91 99588 03184 and we will quote it mill-direct. Minimum order for an off-catalogue base is 100 metres, and it needs extra lead time, so plan the order in advance. Which fabric base families can this design be printed on? Viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton — over 100 qualities across those families. The same artwork can be printed on any of them. The 17 shown on this page are the bases we run at scale and keep ready for quick production; anything outside that list is made to order at 100 metres minimum. Is this fabric ready stock or made to order? All Clothwala fabric is made to order. Nothing is pre-made stock — we print each order specially for you, which means the design can be customised to your requirement: a different colourway, a larger or smaller print scale, or your own artwork printed on any of our 17 base cloths. How long does delivery take? We dispatch within one week of order confirmation. Transit time after dispatch depends on your courier and where you are located in India, so total delivery time varies by destination. Contact us on info@clothwala.com for a delivery estimate for your city. Is the print colour-fast? Yes. High-definition wash-fast inks are used. OEKO-TEX compliant fabric options are available for export orders. Need a fabric base not listed here? We hold 100+ qualities across viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp or email info@clothwala.com — mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

Forest Green geometric digital print fabric, sold by the metre in 17 fabric qualities from Rs249 per metre. Suitable for Shirt. Available from 1 metre with flexible wholesale minimums and bulk tiers. Made to order at our Surat mill and dispatched within one week. About this print A captivating all-over print features a dense mosaic of 3D cubes in rich tones of emerald green, burnt orange, scarlet red, and deep chocolate brown. This design embodies a modern digital art trend, creating a dynamic and sophisticated mood with its optical depth. Perfect for creating statement co-ord sets, contemporary kurtas, or structured dresses, this fabric is ideal for casual outings and creative events. Fabric needed per garment Garment Fabric needed Recommended quality Why Shirt 2.0 – 2.5 m Cotton Cambric (80–110 GSM) a crisp, stable hand that presses cleanly at collar and cuff Full fabric requirement chart This design is printed to order on any of our 17 base cloths, so it can be cut for far more than the garments above. Fabric quantities below are at 44 inch width. Fabric needed for 37 garment types — womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 – 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 – 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 – 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 – 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 – 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 – 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 – 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 – 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 – 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 – 3.5 m Poly Crepe one-piece cut Dress 3.0 – 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 – 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 – 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 – 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 – 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 – 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 – 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 – 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 – 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 – 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 – 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 – 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 – 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 – 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4–8 Kids Kurta 1.5 m Poly Muslin age 4–8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 – 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Specifications Design code 638 Primary colour Forest Green Full palette Emerald Green, Burnt Orange, Scarlet Red, Marigold Yellow, Chocolate Brown Pattern Geometric Print scale Medium Aesthetic Contemporary Fusion Mood Dark & Dramatic Suitable garments Shirt Fabric options 17 bases listed online; 100+ qualities available on request Base families Viscose, cotton, polyester, nylon, nylon-cotton, polyester-cotton Width 44 inch standard; 54 inch on request Price range Rs249 – Rs649 per metre Minimum order From 1 metre; flexible wholesale minimums Off-catalogue base MOQ 100 metres Printing High-definition digital print, wash-fast Production Made to order — customisable Dispatch Within 1 week from Surat, Gujarat Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Bulk pricing 7 metres and above — 10% off 26 metres and above — 15% off 50 metres and above — 20% off 100 metres and above — 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Shirt — 2.0 – 2.5 m (all at 44 inch width). The full chart on this page also covers menswear — men's shirt 2.0–2.5 m, men's kurta 2.5–3.0 m, kurta pyjama set 4.0–4.5 m, Nehru jacket 1.5–2.0 m, sherwani 3.5–4.0 m — plus kids wear and home furnishing. Can this print be used for menswear? Yes. The same artwork prints on all 17 base cloths, so it can be cut for men's shirts, resort shirts, kurtas, kurta pyjama sets, Nehru jackets, bandgalas and bomber jackets. Poly Muslin and Cotton Cambric are the usual choices for men's shirting; Poly Linen Satin for structured jackets. Which fabric quality should I choose? for a shirt, Cotton Cambric. All 17 qualities carry the same artwork, so you can order any base cloth in this design. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers — contact us for mill-direct bulk rates. Note that 1 unit = 0.5 metres. An off-catalogue fabric base is the one exception: those start at 100 metres. Can design 638 be printed in another colour? Yes. This geometric design can be recoloured to any Pantone shade on request, with no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. We hold over 100 fabric qualities in total. Only our 17 highest-volume, most-trending bases are listed on the website — the full range covers viscose bases, cotton bases, polyester bases, nylon, nylon-cotton blends and polyester-cotton blends. If you need a specific base for your brand, message us on WhatsApp at +91 99588 03184 and we will quote it mill-direct. Minimum order for an off-catalogue base is 100 metres, and it needs extra lead time, so plan the order in advance. Which fabric base families can this design be printed on? Viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton — over 100 qualities across those families. The same artwork can be printed on any of them. The 17 shown on this page are the bases we run at scale and keep ready for quick production; anything outside that list is made to order at 100 metres minimum. Is this fabric ready stock or made to order? All Clothwala fabric is made to order. Nothing is pre-made stock — we print each order specially for you, which means the design can be customised to your requirement: a different colourway, a larger or smaller print scale, or your own artwork printed on any of our 17 base cloths. How long does delivery take? We dispatch within one week of order confirmation. Transit time after dispatch depends on your courier and where you are located in India, so total delivery time varies by destination. Contact us on info@clothwala.com for a delivery estimate for your city. Is the print colour-fast? Yes. High-definition wash-fast inks are used. OEKO-TEX compliant fabric options are available for export orders. Need a fabric base not listed here? We hold 100+ qualities across viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp or email info@clothwala.com — mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

Deep Teal geometric digital print fabric, sold by the metre in 17 fabric qualities from Rs249 per metre. Suitable for Jumpsuit. Available from 1 metre with flexible wholesale minimums and bulk tiers. Made to order at our Surat mill and dispatched within one week. About this print This striking all-over print features an intricate basket-weave pattern of interlocking rectangular blocks in a rich palette of crimson red, deep teal, and burnt umber. It embodies a modern, architectural trend, creating a sophisticated and dramatic mood with its 3D-like texture and depth. This versatile fabric is ideal for creating statement structured garments like blazers and co-ord sets for evening events or contemporary ethnic wear for festive gatherings. Fabric needed per garment Garment Fabric needed Recommended quality Why Jumpsuit 3.0 – 3.5 m Poly Crepe (80–95 GSM) a stable hand that holds shape through a one-piece cut Full fabric requirement chart This design is printed to order on any of our 17 base cloths, so it can be cut for far more than the garments above. Fabric quantities below are at 44 inch width. Fabric needed for 37 garment types — womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 – 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 – 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 – 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 – 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 – 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 – 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 – 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 – 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 – 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 – 3.5 m Poly Crepe one-piece cut Dress 3.0 – 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 – 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 – 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 – 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 – 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 – 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 – 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 – 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 – 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 – 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 – 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 – 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 – 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 – 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4–8 Kids Kurta 1.5 m Poly Muslin age 4–8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 – 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Specifications Design code 637 Primary colour Deep Teal Full palette Crimson Red, Deep Teal, Burnt Umber, Charcoal Black, Orange Ochre Pattern Geometric Print scale Medium Aesthetic Contemporary Fusion Mood Dark & Dramatic Suitable garments Jumpsuit Fabric options 17 bases listed online; 100+ qualities available on request Base families Viscose, cotton, polyester, nylon, nylon-cotton, polyester-cotton Width 44 inch standard; 54 inch on request Price range Rs249 – Rs649 per metre Minimum order From 1 metre; flexible wholesale minimums Off-catalogue base MOQ 100 metres Printing High-definition digital print, wash-fast Production Made to order — customisable Dispatch Within 1 week from Surat, Gujarat Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Bulk pricing 7 metres and above — 10% off 26 metres and above — 15% off 50 metres and above — 20% off 100 metres and above — 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Jumpsuit — 3.0 – 3.5 m (all at 44 inch width). The full chart on this page also covers menswear — men's shirt 2.0–2.5 m, men's kurta 2.5–3.0 m, kurta pyjama set 4.0–4.5 m, Nehru jacket 1.5–2.0 m, sherwani 3.5–4.0 m — plus kids wear and home furnishing. Can this print be used for menswear? Yes. The same artwork prints on all 17 base cloths, so it can be cut for men's shirts, resort shirts, kurtas, kurta pyjama sets, Nehru jackets, bandgalas and bomber jackets. Poly Muslin and Cotton Cambric are the usual choices for men's shirting; Poly Linen Satin for structured jackets. Which fabric quality should I choose? for a jumpsuit, Poly Crepe. All 17 qualities carry the same artwork, so you can order any base cloth in this design. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers — contact us for mill-direct bulk rates. Note that 1 unit = 0.5 metres. An off-catalogue fabric base is the one exception: those start at 100 metres. Can design 637 be printed in another colour? Yes. This geometric design can be recoloured to any Pantone shade on request, with no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. We hold over 100 fabric qualities in total. Only our 17 highest-volume, most-trending bases are listed on the website — the full range covers viscose bases, cotton bases, polyester bases, nylon, nylon-cotton blends and polyester-cotton blends. If you need a specific base for your brand, message us on WhatsApp at +91 99588 03184 and we will quote it mill-direct. Minimum order for an off-catalogue base is 100 metres, and it needs extra lead time, so plan the order in advance. Which fabric base families can this design be printed on? Viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton — over 100 qualities across those families. The same artwork can be printed on any of them. The 17 shown on this page are the bases we run at scale and keep ready for quick production; anything outside that list is made to order at 100 metres minimum. Is this fabric ready stock or made to order? All Clothwala fabric is made to order. Nothing is pre-made stock — we print each order specially for you, which means the design can be customised to your requirement: a different colourway, a larger or smaller print scale, or your own artwork printed on any of our 17 base cloths. How long does delivery take? We dispatch within one week of order confirmation. Transit time after dispatch depends on your courier and where you are located in India, so total delivery time varies by destination. Contact us on info@clothwala.com for a delivery estimate for your city. Is the print colour-fast? Yes. High-definition wash-fast inks are used. OEKO-TEX compliant fabric options are available for export orders. Need a fabric base not listed here? We hold 100+ qualities across viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp or email info@clothwala.com — mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

Fiery Orange abstract digital print fabric, sold by the metre in 17 fabric qualities from Rs249 per metre. Suitable for Co-ord Set. Available from 1 metre with flexible wholesale minimums and bulk tiers. Made to order at our Surat mill and dispatched within one week. About this print This dynamic print features a pixelated mosaic of fiery orange, saffron yellow, and crimson red squares, overlaid with dramatic, shadowy drapes that create a stunning 3D illusion. Embodying a bold digital art trend, the design exudes a modern, edgy, and vibrant mood. This fabric is perfect for creating statement-making kaftans, contemporary co-ord sets, or unique blouses for parties and creative events. Fabric needed per garment Garment Fabric needed Recommended quality Why Co-ord Set 3.0 – 3.5 m Poly Crepe (80–95 GSM) a stable, low-stretch hand so top and bottom hang as a matched set Full fabric requirement chart This design is printed to order on any of our 17 base cloths, so it can be cut for far more than the garments above. Fabric quantities below are at 44 inch width. Fabric needed for 37 garment types — womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 – 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 – 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 – 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 – 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 – 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 – 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 – 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 – 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 – 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 – 3.5 m Poly Crepe one-piece cut Dress 3.0 – 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 – 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 – 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 – 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 – 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 – 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 – 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 – 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 – 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 – 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 – 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 – 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 – 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 – 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4–8 Kids Kurta 1.5 m Poly Muslin age 4–8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 – 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Specifications Design code 633 Primary colour Fiery Orange Full palette Fiery Orange, Saffron Yellow, Crimson Red, Ivory White, Charcoal Black Pattern Abstract Print scale Large Aesthetic Contemporary Fusion Mood Bold & Festive Suitable garments Co-ord Set Fabric options 17 bases listed online; 100+ qualities available on request Base families Viscose, cotton, polyester, nylon, nylon-cotton, polyester-cotton Width 44 inch standard; 54 inch on request Price range Rs249 – Rs649 per metre Minimum order From 1 metre; flexible wholesale minimums Off-catalogue base MOQ 100 metres Printing High-definition digital print, wash-fast Production Made to order — customisable Dispatch Within 1 week from Surat, Gujarat Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Bulk pricing 7 metres and above — 10% off 26 metres and above — 15% off 50 metres and above — 20% off 100 metres and above — 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Co-ord Set — 3.0 – 3.5 m (all at 44 inch width). The full chart on this page also covers menswear — men's shirt 2.0–2.5 m, men's kurta 2.5–3.0 m, kurta pyjama set 4.0–4.5 m, Nehru jacket 1.5–2.0 m, sherwani 3.5–4.0 m — plus kids wear and home furnishing. Can this print be used for menswear? Yes. The same artwork prints on all 17 base cloths, so it can be cut for men's shirts, resort shirts, kurtas, kurta pyjama sets, Nehru jackets, bandgalas and bomber jackets. Poly Muslin and Cotton Cambric are the usual choices for men's shirting; Poly Linen Satin for structured jackets. Which fabric quality should I choose? for a co-ord set, Poly Crepe. All 17 qualities carry the same artwork, so you can order any base cloth in this design. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers — contact us for mill-direct bulk rates. Note that 1 unit = 0.5 metres. An off-catalogue fabric base is the one exception: those start at 100 metres. Can design 633 be printed in another colour? Yes. This abstract design can be recoloured to any Pantone shade on request, with no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. We hold over 100 fabric qualities in total. Only our 17 highest-volume, most-trending bases are listed on the website — the full range covers viscose bases, cotton bases, polyester bases, nylon, nylon-cotton blends and polyester-cotton blends. If you need a specific base for your brand, message us on WhatsApp at +91 99588 03184 and we will quote it mill-direct. Minimum order for an off-catalogue base is 100 metres, and it needs extra lead time, so plan the order in advance. Which fabric base families can this design be printed on? Viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton — over 100 qualities across those families. The same artwork can be printed on any of them. The 17 shown on this page are the bases we run at scale and keep ready for quick production; anything outside that list is made to order at 100 metres minimum. Is this fabric ready stock or made to order? All Clothwala fabric is made to order. Nothing is pre-made stock — we print each order specially for you, which means the design can be customised to your requirement: a different colourway, a larger or smaller print scale, or your own artwork printed on any of our 17 base cloths. How long does delivery take? We dispatch within one week of order confirmation. Transit time after dispatch depends on your courier and where you are located in India, so total delivery time varies by destination. Contact us on info@clothwala.com for a delivery estimate for your city. Is the print colour-fast? Yes. High-definition wash-fast inks are used. OEKO-TEX compliant fabric options are available for export orders. Need a fabric base not listed here? We hold 100+ qualities across viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp or email info@clothwala.com — mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

Sunset Orange geometric digital print fabric, sold by the metre in 17 fabric qualities from Rs249 per metre. Suitable for Palazzo Pants. Available from 1 metre with flexible wholesale minimums and bulk tiers. Made to order at our Surat mill and dispatched within one week. About this print A dynamic all-over print featuring a pixelated chevron pattern that creates a stunning 3D illusion, rendered in a vibrant gradient of sunset orange, golden yellow, and cool azure blues. This design embodies a contemporary digital art trend, projecting an energetic, modern, and visually captivating mood. Perfect for creating statement-making co-ord sets, modern kurtas, and flowing kaftans for resort getaways or trendy casual events. Fabric needed per garment Garment Fabric needed Recommended quality Why Palazzo Pants 2.5 – 2.5 m Poly Rayon (90–110 GSM) weight and fall so the wide leg holds its column Full fabric requirement chart This design is printed to order on any of our 17 base cloths, so it can be cut for far more than the garments above. Fabric quantities below are at 44 inch width. Fabric needed for 37 garment types — womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 – 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 – 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 – 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 – 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 – 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 – 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 – 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 – 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 – 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 – 3.5 m Poly Crepe one-piece cut Dress 3.0 – 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 – 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 – 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 – 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 – 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 – 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 – 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 – 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 – 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 – 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 – 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 – 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 – 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 – 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4–8 Kids Kurta 1.5 m Poly Muslin age 4–8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 – 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Specifications Design code 630 Primary colour Sunset Orange Full palette Sunset Orange, Azure Blue, Golden Yellow, Teal, Cool Grey Pattern Geometric Print scale Medium Aesthetic Contemporary Fusion Mood Bold & Festive Suitable garments Palazzo Pants Fabric options 17 bases listed online; 100+ qualities available on request Base families Viscose, cotton, polyester, nylon, nylon-cotton, polyester-cotton Width 44 inch standard; 54 inch on request Price range Rs249 – Rs649 per metre Minimum order From 1 metre; flexible wholesale minimums Off-catalogue base MOQ 100 metres Printing High-definition digital print, wash-fast Production Made to order — customisable Dispatch Within 1 week from Surat, Gujarat Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Bulk pricing 7 metres and above — 10% off 26 metres and above — 15% off 50 metres and above — 20% off 100 metres and above — 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Palazzo Pants — 2.5 – 2.5 m (all at 44 inch width). The full chart on this page also covers menswear — men's shirt 2.0–2.5 m, men's kurta 2.5–3.0 m, kurta pyjama set 4.0–4.5 m, Nehru jacket 1.5–2.0 m, sherwani 3.5–4.0 m — plus kids wear and home furnishing. Can this print be used for menswear? Yes. The same artwork prints on all 17 base cloths, so it can be cut for men's shirts, resort shirts, kurtas, kurta pyjama sets, Nehru jackets, bandgalas and bomber jackets. Poly Muslin and Cotton Cambric are the usual choices for men's shirting; Poly Linen Satin for structured jackets. Which fabric quality should I choose? for a palazzo pants, Poly Rayon. All 17 qualities carry the same artwork, so you can order any base cloth in this design. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers — contact us for mill-direct bulk rates. Note that 1 unit = 0.5 metres. An off-catalogue fabric base is the one exception: those start at 100 metres. Can design 630 be printed in another colour? Yes. This geometric design can be recoloured to any Pantone shade on request, with no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. We hold over 100 fabric qualities in total. Only our 17 highest-volume, most-trending bases are listed on the website — the full range covers viscose bases, cotton bases, polyester bases, nylon, nylon-cotton blends and polyester-cotton blends. If you need a specific base for your brand, message us on WhatsApp at +91 99588 03184 and we will quote it mill-direct. Minimum order for an off-catalogue base is 100 metres, and it needs extra lead time, so plan the order in advance. Which fabric base families can this design be printed on? Viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton — over 100 qualities across those families. The same artwork can be printed on any of them. The 17 shown on this page are the bases we run at scale and keep ready for quick production; anything outside that list is made to order at 100 metres minimum. Is this fabric ready stock or made to order? All Clothwala fabric is made to order. Nothing is pre-made stock — we print each order specially for you, which means the design can be customised to your requirement: a different colourway, a larger or smaller print scale, or your own artwork printed on any of our 17 base cloths. How long does delivery take? We dispatch within one week of order confirmation. Transit time after dispatch depends on your courier and where you are located in India, so total delivery time varies by destination. Contact us on info@clothwala.com for a delivery estimate for your city. Is the print colour-fast? Yes. High-definition wash-fast inks are used. OEKO-TEX compliant fabric options are available for export orders. Need a fabric base not listed here? We hold 100+ qualities across viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp or email info@clothwala.com — mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

Tangerine Orange abstract digital print fabric, sold by the metre in 17 fabric qualities from Rs249 per metre. Suitable for Maxi Dress. Available from 1 metre with flexible wholesale minimums and bulk tiers. Made to order at our Surat mill and dispatched within one week. About this print A dynamic all-over print features a mosaic of digital pixels in a fiery palette of paprika, tangerine, and soft apricot, accented with cream highlights. This design embodies the 'Digital Glitch' trend, creating a bold, energetic, and futuristic mood. It is perfect for creating statement co-ord sets, contemporary kurtas, or flowy kaftans for trendy casual outings or resort wear. Fabric needed per garment Garment Fabric needed Recommended quality Why Maxi Dress 3.0 – 3.5 m Poly Georgette (70–90 GSM) fluid drape that carries a full-length silhouette without stiffness Full fabric requirement chart This design is printed to order on any of our 17 base cloths, so it can be cut for far more than the garments above. Fabric quantities below are at 44 inch width. Fabric needed for 37 garment types — womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 – 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 – 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 – 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 – 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 – 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 – 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 – 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 – 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 – 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 – 3.5 m Poly Crepe one-piece cut Dress 3.0 – 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 – 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 – 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 – 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 – 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 – 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 – 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 – 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 – 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 – 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 – 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 – 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 – 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 – 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4–8 Kids Kurta 1.5 m Poly Muslin age 4–8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 – 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Specifications Design code 628 Primary colour Tangerine Orange Full palette Paprika, Tangerine, Apricot, Cream, Burnt Umber Pattern Abstract Print scale Medium Aesthetic Contemporary Fusion Mood Bold & Festive Suitable garments Maxi Dress Fabric options 17 bases listed online; 100+ qualities available on request Base families Viscose, cotton, polyester, nylon, nylon-cotton, polyester-cotton Width 44 inch standard; 54 inch on request Price range Rs249 – Rs649 per metre Minimum order From 1 metre; flexible wholesale minimums Off-catalogue base MOQ 100 metres Printing High-definition digital print, wash-fast Production Made to order — customisable Dispatch Within 1 week from Surat, Gujarat Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Bulk pricing 7 metres and above — 10% off 26 metres and above — 15% off 50 metres and above — 20% off 100 metres and above — 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Maxi Dress — 3.0 – 3.5 m (all at 44 inch width). The full chart on this page also covers menswear — men's shirt 2.0–2.5 m, men's kurta 2.5–3.0 m, kurta pyjama set 4.0–4.5 m, Nehru jacket 1.5–2.0 m, sherwani 3.5–4.0 m — plus kids wear and home furnishing. Can this print be used for menswear? Yes. The same artwork prints on all 17 base cloths, so it can be cut for men's shirts, resort shirts, kurtas, kurta pyjama sets, Nehru jackets, bandgalas and bomber jackets. Poly Muslin and Cotton Cambric are the usual choices for men's shirting; Poly Linen Satin for structured jackets. Which fabric quality should I choose? for a maxi dress, Poly Georgette. All 17 qualities carry the same artwork, so you can order any base cloth in this design. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers — contact us for mill-direct bulk rates. Note that 1 unit = 0.5 metres. An off-catalogue fabric base is the one exception: those start at 100 metres. Can design 628 be printed in another colour? Yes. This abstract design can be recoloured to any Pantone shade on request, with no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. We hold over 100 fabric qualities in total. Only our 17 highest-volume, most-trending bases are listed on the website — the full range covers viscose bases, cotton bases, polyester bases, nylon, nylon-cotton blends and polyester-cotton blends. If you need a specific base for your brand, message us on WhatsApp at +91 99588 03184 and we will quote it mill-direct. Minimum order for an off-catalogue base is 100 metres, and it needs extra lead time, so plan the order in advance. Which fabric base families can this design be printed on? Viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton — over 100 qualities across those families. The same artwork can be printed on any of them. The 17 shown on this page are the bases we run at scale and keep ready for quick production; anything outside that list is made to order at 100 metres minimum. Is this fabric ready stock or made to order? All Clothwala fabric is made to order. Nothing is pre-made stock — we print each order specially for you, which means the design can be customised to your requirement: a different colourway, a larger or smaller print scale, or your own artwork printed on any of our 17 base cloths. How long does delivery take? We dispatch within one week of order confirmation. Transit time after dispatch depends on your courier and where you are located in India, so total delivery time varies by destination. Contact us on info@clothwala.com for a delivery estimate for your city. Is the print colour-fast? Yes. High-definition wash-fast inks are used. OEKO-TEX compliant fabric options are available for export orders. Need a fabric base not listed here? We hold 100+ qualities across viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp or email info@clothwala.com — mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

Charcoal Grey geometric digital print fabric, sold by the metre in 17 fabric qualities from Rs249 per metre. Suitable for Structured Trousers. Available from 1 metre with flexible wholesale minimums and bulk tiers. Made to order at our Surat mill and dispatched within one week. About this print A sophisticated all-over print featuring a complex tessellation of three-dimensional cubes and blocks in a monochromatic palette of charcoal grey, jet black, and slate. This design embodies a futuristic, architectural trend, creating a mood that is both urban-chic and intellectually sharp. It is perfect for creating structured contemporary garments like modern kurtas, tailored blazers, or statement trousers for formal or evening occasions. Fabric needed per garment Garment Fabric needed Recommended quality Why Structured Trousers 3.0 – 3.5 m Poly Georgette (70–90 GSM) drape that holds a clean silhouette without stiffness Full fabric requirement chart This design is printed to order on any of our 17 base cloths, so it can be cut for far more than the garments above. Fabric quantities below are at 44 inch width. Fabric needed for 37 garment types — womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 – 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 – 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 – 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 – 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 – 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 – 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 – 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 – 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 – 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 – 3.5 m Poly Crepe one-piece cut Dress 3.0 – 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 – 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 – 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 – 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 – 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 – 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 – 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 – 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 – 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 – 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 – 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 – 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 – 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 – 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4–8 Kids Kurta 1.5 m Poly Muslin age 4–8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 – 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Specifications Design code 627 Primary colour Charcoal Grey Full palette Charcoal Grey, Jet Black, Slate Grey, Graphite, Silver Pattern Geometric Print scale Medium Aesthetic Contemporary Fusion Mood Dark & Dramatic Suitable garments Structured Trousers Fabric options 17 bases listed online; 100+ qualities available on request Base families Viscose, cotton, polyester, nylon, nylon-cotton, polyester-cotton Width 44 inch standard; 54 inch on request Price range Rs249 – Rs649 per metre Minimum order From 1 metre; flexible wholesale minimums Off-catalogue base MOQ 100 metres Printing High-definition digital print, wash-fast Production Made to order — customisable Dispatch Within 1 week from Surat, Gujarat Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Bulk pricing 7 metres and above — 10% off 26 metres and above — 15% off 50 metres and above — 20% off 100 metres and above — 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Structured Trousers — 3.0 – 3.5 m (all at 44 inch width). The full chart on this page also covers menswear — men's shirt 2.0–2.5 m, men's kurta 2.5–3.0 m, kurta pyjama set 4.0–4.5 m, Nehru jacket 1.5–2.0 m, sherwani 3.5–4.0 m — plus kids wear and home furnishing. Can this print be used for menswear? Yes. The same artwork prints on all 17 base cloths, so it can be cut for men's shirts, resort shirts, kurtas, kurta pyjama sets, Nehru jackets, bandgalas and bomber jackets. Poly Muslin and Cotton Cambric are the usual choices for men's shirting; Poly Linen Satin for structured jackets. Which fabric quality should I choose? for a structured trousers, Poly Georgette. All 17 qualities carry the same artwork, so you can order any base cloth in this design. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers — contact us for mill-direct bulk rates. Note that 1 unit = 0.5 metres. An off-catalogue fabric base is the one exception: those start at 100 metres. Can design 627 be printed in another colour? Yes. This geometric design can be recoloured to any Pantone shade on request, with no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. We hold over 100 fabric qualities in total. Only our 17 highest-volume, most-trending bases are listed on the website — the full range covers viscose bases, cotton bases, polyester bases, nylon, nylon-cotton blends and polyester-cotton blends. If you need a specific base for your brand, message us on WhatsApp at +91 99588 03184 and we will quote it mill-direct. Minimum order for an off-catalogue base is 100 metres, and it needs extra lead time, so plan the order in advance. Which fabric base families can this design be printed on? Viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton — over 100 qualities across those families. The same artwork can be printed on any of them. The 17 shown on this page are the bases we run at scale and keep ready for quick production; anything outside that list is made to order at 100 metres minimum. Is this fabric ready stock or made to order? All Clothwala fabric is made to order. Nothing is pre-made stock — we print each order specially for you, which means the design can be customised to your requirement: a different colourway, a larger or smaller print scale, or your own artwork printed on any of our 17 base cloths. How long does delivery take? We dispatch within one week of order confirmation. Transit time after dispatch depends on your courier and where you are located in India, so total delivery time varies by destination. Contact us on info@clothwala.com for a delivery estimate for your city. Is the print colour-fast? Yes. High-definition wash-fast inks are used. OEKO-TEX compliant fabric options are available for export orders. Need a fabric base not listed here? We hold 100+ qualities across viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp or email info@clothwala.com — mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

Slate Grey geometric digital print fabric, sold by the metre in 17 fabric qualities from Rs249 per metre. Suitable for Trousers. Available from 1 metre with flexible wholesale minimums and bulk tiers. Made to order at our Surat mill and dispatched within one week. About this print This intricate all-over print features a complex mosaic of interlocking geometric shapes in a sophisticated palette of charcoal grey, slate blue, ash, and ivory cream. Embodying a modern, architectural trend, the design projects an urban and refined mood. It is perfectly suited for creating contemporary kurtas, sharp co-ord sets, and statement-making formal shirts. Fabric needed per garment Garment Fabric needed Recommended quality Why Trousers 2.5 – 2.5 m Poly Rayon (90–110 GSM) weight so the wide leg falls straight without clinging Full fabric requirement chart This design is printed to order on any of our 17 base cloths, so it can be cut for far more than the garments above. Fabric quantities below are at 44 inch width. Fabric needed for 37 garment types — womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 – 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 – 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 – 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 – 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 – 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 – 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 – 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 – 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 – 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 – 3.5 m Poly Crepe one-piece cut Dress 3.0 – 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 – 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 – 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 – 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 – 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 – 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 – 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 – 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 – 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 – 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 – 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 – 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 – 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 – 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4–8 Kids Kurta 1.5 m Poly Muslin age 4–8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 – 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Specifications Design code 624 Primary colour Slate Grey Full palette Charcoal Grey, Slate Blue, Ash Grey, Silver Mist, Ivory Cream Pattern Geometric Print scale Medium Aesthetic Contemporary Fusion Mood Elegant & Refined Suitable garments Trousers Fabric options 17 bases listed online; 100+ qualities available on request Base families Viscose, cotton, polyester, nylon, nylon-cotton, polyester-cotton Width 44 inch standard; 54 inch on request Price range Rs249 – Rs649 per metre Minimum order From 1 metre; flexible wholesale minimums Off-catalogue base MOQ 100 metres Printing High-definition digital print, wash-fast Production Made to order — customisable Dispatch Within 1 week from Surat, Gujarat Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Bulk pricing 7 metres and above — 10% off 26 metres and above — 15% off 50 metres and above — 20% off 100 metres and above — 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Trousers — 2.5 – 2.5 m (all at 44 inch width). The full chart on this page also covers menswear — men's shirt 2.0–2.5 m, men's kurta 2.5–3.0 m, kurta pyjama set 4.0–4.5 m, Nehru jacket 1.5–2.0 m, sherwani 3.5–4.0 m — plus kids wear and home furnishing. Can this print be used for menswear? Yes. The same artwork prints on all 17 base cloths, so it can be cut for men's shirts, resort shirts, kurtas, kurta pyjama sets, Nehru jackets, bandgalas and bomber jackets. Poly Muslin and Cotton Cambric are the usual choices for men's shirting; Poly Linen Satin for structured jackets. Which fabric quality should I choose? for a trousers, Poly Rayon. All 17 qualities carry the same artwork, so you can order any base cloth in this design. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers — contact us for mill-direct bulk rates. Note that 1 unit = 0.5 metres. An off-catalogue fabric base is the one exception: those start at 100 metres. Can design 624 be printed in another colour? Yes. This geometric design can be recoloured to any Pantone shade on request, with no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. We hold over 100 fabric qualities in total. Only our 17 highest-volume, most-trending bases are listed on the website — the full range covers viscose bases, cotton bases, polyester bases, nylon, nylon-cotton blends and polyester-cotton blends. If you need a specific base for your brand, message us on WhatsApp at +91 99588 03184 and we will quote it mill-direct. Minimum order for an off-catalogue base is 100 metres, and it needs extra lead time, so plan the order in advance. Which fabric base families can this design be printed on? Viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton — over 100 qualities across those families. The same artwork can be printed on any of them. The 17 shown on this page are the bases we run at scale and keep ready for quick production; anything outside that list is made to order at 100 metres minimum. Is this fabric ready stock or made to order? All Clothwala fabric is made to order. Nothing is pre-made stock — we print each order specially for you, which means the design can be customised to your requirement: a different colourway, a larger or smaller print scale, or your own artwork printed on any of our 17 base cloths. How long does delivery take? We dispatch within one week of order confirmation. Transit time after dispatch depends on your courier and where you are located in India, so total delivery time varies by destination. Contact us on info@clothwala.com for a delivery estimate for your city. Is the print colour-fast? Yes. High-definition wash-fast inks are used. OEKO-TEX compliant fabric options are available for export orders. Need a fabric base not listed here? We hold 100+ qualities across viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp or email info@clothwala.com — mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

Charcoal Grey abstract digital print fabric, sold by the metre in 17 fabric qualities from Rs249 per metre. Suitable for Maxi Dress. Available from 1 metre with flexible wholesale minimums and bulk tiers. Made to order at our Surat mill and dispatched within one week. About this print A dynamic all-over print features a pixelated mosaic of black, charcoal, and slate grey squares, overlaid with shadowy, distorted waves that create a digital static effect. This design embodies a futuristic Techno-Glitch trend, projecting an edgy and modern mood. Perfect for creating statement co-ord sets, contemporary sarees, and sharp kurtas for urban and party wear. Fabric needed per garment Garment Fabric needed Recommended quality Why Maxi Dress 3.0 – 3.5 m Poly Georgette (70–90 GSM) fluid drape that carries a full-length silhouette without stiffness Full fabric requirement chart This design is printed to order on any of our 17 base cloths, so it can be cut for far more than the garments above. Fabric quantities below are at 44 inch width. Fabric needed for 37 garment types — womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 – 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 – 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 – 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 – 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 – 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 – 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 – 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 – 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 – 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 – 3.5 m Poly Crepe one-piece cut Dress 3.0 – 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 – 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 – 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 – 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 – 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 – 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 – 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 – 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 – 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 – 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 – 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 – 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 – 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 – 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4–8 Kids Kurta 1.5 m Poly Muslin age 4–8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 – 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Specifications Design code 619 Primary colour Charcoal Grey Full palette Black, Charcoal Grey, Slate Grey, Ash, Off-White Pattern Abstract Print scale Fine Aesthetic Contemporary Fusion Mood Dark & Dramatic Suitable garments Maxi Dress Fabric options 17 bases listed online; 100+ qualities available on request Base families Viscose, cotton, polyester, nylon, nylon-cotton, polyester-cotton Width 44 inch standard; 54 inch on request Price range Rs249 – Rs649 per metre Minimum order From 1 metre; flexible wholesale minimums Off-catalogue base MOQ 100 metres Printing High-definition digital print, wash-fast Production Made to order — customisable Dispatch Within 1 week from Surat, Gujarat Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Bulk pricing 7 metres and above — 10% off 26 metres and above — 15% off 50 metres and above — 20% off 100 metres and above — 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Maxi Dress — 3.0 – 3.5 m (all at 44 inch width). The full chart on this page also covers menswear — men's shirt 2.0–2.5 m, men's kurta 2.5–3.0 m, kurta pyjama set 4.0–4.5 m, Nehru jacket 1.5–2.0 m, sherwani 3.5–4.0 m — plus kids wear and home furnishing. Can this print be used for menswear? Yes. The same artwork prints on all 17 base cloths, so it can be cut for men's shirts, resort shirts, kurtas, kurta pyjama sets, Nehru jackets, bandgalas and bomber jackets. Poly Muslin and Cotton Cambric are the usual choices for men's shirting; Poly Linen Satin for structured jackets. Which fabric quality should I choose? for a maxi dress, Poly Georgette. All 17 qualities carry the same artwork, so you can order any base cloth in this design. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers — contact us for mill-direct bulk rates. Note that 1 unit = 0.5 metres. An off-catalogue fabric base is the one exception: those start at 100 metres. Can design 619 be printed in another colour? Yes. This abstract design can be recoloured to any Pantone shade on request, with no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. We hold over 100 fabric qualities in total. Only our 17 highest-volume, most-trending bases are listed on the website — the full range covers viscose bases, cotton bases, polyester bases, nylon, nylon-cotton blends and polyester-cotton blends. If you need a specific base for your brand, message us on WhatsApp at +91 99588 03184 and we will quote it mill-direct. Minimum order for an off-catalogue base is 100 metres, and it needs extra lead time, so plan the order in advance. Which fabric base families can this design be printed on? Viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton — over 100 qualities across those families. The same artwork can be printed on any of them. The 17 shown on this page are the bases we run at scale and keep ready for quick production; anything outside that list is made to order at 100 metres minimum. Is this fabric ready stock or made to order? All Clothwala fabric is made to order. Nothing is pre-made stock — we print each order specially for you, which means the design can be customised to your requirement: a different colourway, a larger or smaller print scale, or your own artwork printed on any of our 17 base cloths. How long does delivery take? We dispatch within one week of order confirmation. Transit time after dispatch depends on your courier and where you are located in India, so total delivery time varies by destination. Contact us on info@clothwala.com for a delivery estimate for your city. Is the print colour-fast? Yes. High-definition wash-fast inks are used. OEKO-TEX compliant fabric options are available for export orders. Need a fabric base not listed here? We hold 100+ qualities across viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp or email info@clothwala.com — mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

Sage Green geometric digital print fabric, sold by the metre in 17 fabric qualities from Rs249 per metre. Suitable for Tunic. Available from 1 metre with flexible wholesale minimums and bulk tiers. Made to order at our Surat mill and dispatched within one week. About this print A captivating grid of geometric motifs unfolds in a sophisticated palette of dusty coral and sage green against an ivory cream base. This print channels a 'Modern Ethnic' trend, creating an earthy and grounded mood with a contemporary edge. It is perfectly suited for crafting stylish kaftans, co-ord sets, and kurta sets for resort or casual wear. Fabric needed per garment Garment Fabric needed Recommended quality Why Tunic 2.0 – 2.5 m Poly Crepe (80–95 GSM) an easy hand that skims rather than clings Full fabric requirement chart This design is printed to order on any of our 17 base cloths, so it can be cut for far more than the garments above. Fabric quantities below are at 44 inch width. Fabric needed for 37 garment types — womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 – 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 – 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 – 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 – 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 – 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 – 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 – 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 – 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 – 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 – 3.5 m Poly Crepe one-piece cut Dress 3.0 – 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 – 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 – 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 – 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 – 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 – 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 – 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 – 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 – 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 – 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 – 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 – 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 – 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 – 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4–8 Kids Kurta 1.5 m Poly Muslin age 4–8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 – 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Specifications Design code 618 Primary colour Sage Green Full palette Dusty Coral, Sage Green, Ivory Cream, Muted Teal, Terracotta Pattern Geometric Print scale Medium Aesthetic Tribal Folk Mood Earthy & Grounded | Craft Inspiration: Ikat Suitable garments Tunic Fabric options 17 bases listed online; 100+ qualities available on request Base families Viscose, cotton, polyester, nylon, nylon-cotton, polyester-cotton Width 44 inch standard; 54 inch on request Price range Rs249 – Rs649 per metre Minimum order From 1 metre; flexible wholesale minimums Off-catalogue base MOQ 100 metres Printing High-definition digital print, wash-fast Production Made to order — customisable Dispatch Within 1 week from Surat, Gujarat Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Bulk pricing 7 metres and above — 10% off 26 metres and above — 15% off 50 metres and above — 20% off 100 metres and above — 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Tunic — 2.0 – 2.5 m (all at 44 inch width). The full chart on this page also covers menswear — men's shirt 2.0–2.5 m, men's kurta 2.5–3.0 m, kurta pyjama set 4.0–4.5 m, Nehru jacket 1.5–2.0 m, sherwani 3.5–4.0 m — plus kids wear and home furnishing. Can this print be used for menswear? Yes. The same artwork prints on all 17 base cloths, so it can be cut for men's shirts, resort shirts, kurtas, kurta pyjama sets, Nehru jackets, bandgalas and bomber jackets. Poly Muslin and Cotton Cambric are the usual choices for men's shirting; Poly Linen Satin for structured jackets. Which fabric quality should I choose? for a tunic, Poly Crepe. All 17 qualities carry the same artwork, so you can order any base cloth in this design. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers — contact us for mill-direct bulk rates. Note that 1 unit = 0.5 metres. An off-catalogue fabric base is the one exception: those start at 100 metres. Can design 618 be printed in another colour? Yes. This geometric design can be recoloured to any Pantone shade on request, with no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. We hold over 100 fabric qualities in total. Only our 17 highest-volume, most-trending bases are listed on the website — the full range covers viscose bases, cotton bases, polyester bases, nylon, nylon-cotton blends and polyester-cotton blends. If you need a specific base for your brand, message us on WhatsApp at +91 99588 03184 and we will quote it mill-direct. Minimum order for an off-catalogue base is 100 metres, and it needs extra lead time, so plan the order in advance. Which fabric base families can this design be printed on? Viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton — over 100 qualities across those families. The same artwork can be printed on any of them. The 17 shown on this page are the bases we run at scale and keep ready for quick production; anything outside that list is made to order at 100 metres minimum. Is this fabric ready stock or made to order? All Clothwala fabric is made to order. Nothing is pre-made stock — we print each order specially for you, which means the design can be customised to your requirement: a different colourway, a larger or smaller print scale, or your own artwork printed on any of our 17 base cloths. How long does delivery take? We dispatch within one week of order confirmation. Transit time after dispatch depends on your courier and where you are located in India, so total delivery time varies by destination. Contact us on info@clothwala.com for a delivery estimate for your city. Is the print colour-fast? Yes. High-definition wash-fast inks are used. OEKO-TEX compliant fabric options are available for export orders. Need a fabric base not listed here? We hold 100+ qualities across viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp or email info@clothwala.com — mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less

Terracotta Rust geometric digital print fabric, sold by the metre in 17 fabric qualities from Rs249 per metre. Suitable for Trousers. Available from 1 metre with flexible wholesale minimums and bulk tiers. Made to order at our Surat mill and dispatched within one week. About this print This sophisticated print features a mosaic of pixelated squares and rectangles in a harmonious palette of terracotta rust, sage green, and dusty beige. Embodying a modern digital aesthetic, the design exudes an earthy, grounded, and refined mood. It is perfectly suited for creating chic co-ord sets, contemporary kurtas, and structured dresses for both casual and semi-formal occasions. Fabric needed per garment Garment Fabric needed Recommended quality Why Trousers 2.5 – 2.5 m Poly Rayon (90–110 GSM) weight so the wide leg falls straight without clinging Full fabric requirement chart This design is printed to order on any of our 17 base cloths, so it can be cut for far more than the garments above. Fabric quantities below are at 44 inch width. Fabric needed for 37 garment types — womenswear, menswear, kids and home Category Garment Fabric needed Suggested quality Note Women's wear Maxi Dress 3.0 – 3.5 m Poly Georgette add 0.5 m for a tiered or panelled skirt Kaftan 2.5 – 3.0 m Poly Chiffon 3.5 m for floor length Saree 5.5 m Poly Georgette 6.5 m with matching blouse piece Saree Blouse 1.0 m Poly Japanese Satin 1.25 m for full sleeves Salwar Suit (3 pc) 5.0 – 5.5 m Poly Muslin kurta + bottom + dupatta Kurta Set 3.5 – 4.0 m Poly Muslin add 2.5 m for a dupatta Kurti 2.5 m Poly Crepe 3.0 m for a long straight cut Palazzo Suit 3.5 – 4.0 m Poly Rayon palazzo alone 2.5 m Co-ord Set 3.0 – 3.5 m Poly Crepe top + bottom cut together Anarkali Suit 4.5 – 5.0 m Viscose Georgette panelled flare needs the extra Lehenga 5.0 – 6.0 m Viscose Georgette depends on panel count Sharara / Gharara 4.5 – 5.0 m Viscose Georgette flared leg, add 2.5 m for dupatta Dupatta 2.5 m Viscose Organza 2.5 m at 54 inch for a fuller drape Jumpsuit 3.0 – 3.5 m Poly Crepe one-piece cut Dress 3.0 – 3.5 m Poly Georgette knee to midi length Blouse / Crop Top 1.0 m Cotton Cambric 1.25 m with sleeves Skirt 2.0 – 2.5 m Viscose Crepe 3.5 m for a full circle skirt Shorts 1.0 – 1.5 m Cotton Cambric pair with a matching top Tunic 2.0 – 2.5 m Viscose Rayon skims rather than clings Scarf / Stole 1.0 – 2.0 m Poly Chiffon 1 m square, 2 m stole Men's wear Men's Shirt 2.0 – 2.5 m Cotton Cambric 2.0 m half sleeve, 2.5 m full Men's Resort Shirt 2.0 m Poly Muslin open-collar printed resort style Men's Kurta 2.5 – 3.0 m Poly Muslin straight cut, knee length Kurta Pyjama Set 4.0 – 4.5 m Poly Muslin kurta + pyjama together Nehru Jacket 1.5 – 2.0 m Poly Linen Satin unlined; add 1.5 m for lining Bandgala 2.5 – 3.0 m Poly Linen Satin structured, needs body Sherwani 3.5 – 4.0 m Viscose Modal Satin add lining separately Pathani Suit 3.5 – 4.0 m Poly Rayon kurta + salwar Men's Shorts 1.5 m Cotton Cambric knee length Men's Trousers 1.5 – 2.0 m Poly Linen Satin flat front Bomber Jacket 2.0 – 2.5 m Poly Linen Satin add 2 m if lining Kids & home Kids Frock 1.5 m Cotton Cambric age 4–8 Kids Kurta 1.5 m Poly Muslin age 4–8 Night / Pyjama Set 3.0 m Viscose Rayon top + bottom Cushion Cover 1.0 m Poly Linen Satin 1 m yields two 16 inch covers Curtain Panel 5.0 – 6.0 m Poly Linen Satin per panel, 8 ft drop Table Runner 1.0 m Cotton Cambric 6 seater Specifications Design code 617 Primary colour Terracotta Rust Full palette Terracotta Rust, Sage Green, Ivory Cream, Dusty Beige, Walnut Brown Pattern Geometric Print scale Medium Aesthetic Contemporary Fusion Mood Earthy & Grounded Suitable garments Trousers Fabric options 17 bases listed online; 100+ qualities available on request Base families Viscose, cotton, polyester, nylon, nylon-cotton, polyester-cotton Width 44 inch standard; 54 inch on request Price range Rs249 – Rs649 per metre Minimum order From 1 metre; flexible wholesale minimums Off-catalogue base MOQ 100 metres Printing High-definition digital print, wash-fast Production Made to order — customisable Dispatch Within 1 week from Surat, Gujarat Certification OEKO-TEX compliant options Brand Clothwala by Luthra Exports Bulk pricing 7 metres and above — 10% off 26 metres and above — 15% off 50 metres and above — 20% off 100 metres and above — 25% off, mill-direct wholesale rate Frequently asked questions How much fabric do I need for each garment? Trousers — 2.5 – 2.5 m (all at 44 inch width). The full chart on this page also covers menswear — men's shirt 2.0–2.5 m, men's kurta 2.5–3.0 m, kurta pyjama set 4.0–4.5 m, Nehru jacket 1.5–2.0 m, sherwani 3.5–4.0 m — plus kids wear and home furnishing. Can this print be used for menswear? Yes. The same artwork prints on all 17 base cloths, so it can be cut for men's shirts, resort shirts, kurtas, kurta pyjama sets, Nehru jackets, bandgalas and bomber jackets. Poly Muslin and Cotton Cambric are the usual choices for men's shirting; Poly Linen Satin for structured jackets. Which fabric quality should I choose? for a trousers, Poly Rayon. All 17 qualities carry the same artwork, so you can order any base cloth in this design. What is the minimum order quantity? Our fabric is sold by the metre and available from 1 metre, so you can order a sample length before committing. Flexible wholesale minimums apply, with per-colour and per-design bulk tiers — contact us for mill-direct bulk rates. Note that 1 unit = 0.5 metres. An off-catalogue fabric base is the one exception: those start at 100 metres. Can design 617 be printed in another colour? Yes. This geometric design can be recoloured to any Pantone shade on request, with no extra design charge on orders above 100 metres. Do you have fabric bases other than the 17 listed here? Yes. We hold over 100 fabric qualities in total. Only our 17 highest-volume, most-trending bases are listed on the website — the full range covers viscose bases, cotton bases, polyester bases, nylon, nylon-cotton blends and polyester-cotton blends. If you need a specific base for your brand, message us on WhatsApp at +91 99588 03184 and we will quote it mill-direct. Minimum order for an off-catalogue base is 100 metres, and it needs extra lead time, so plan the order in advance. Which fabric base families can this design be printed on? Viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton — over 100 qualities across those families. The same artwork can be printed on any of them. The 17 shown on this page are the bases we run at scale and keep ready for quick production; anything outside that list is made to order at 100 metres minimum. Is this fabric ready stock or made to order? All Clothwala fabric is made to order. Nothing is pre-made stock — we print each order specially for you, which means the design can be customised to your requirement: a different colourway, a larger or smaller print scale, or your own artwork printed on any of our 17 base cloths. How long does delivery take? We dispatch within one week of order confirmation. Transit time after dispatch depends on your courier and where you are located in India, so total delivery time varies by destination. Contact us on info@clothwala.com for a delivery estimate for your city. Is the print colour-fast? Yes. High-definition wash-fast inks are used. OEKO-TEX compliant fabric options are available for export orders. Need a fabric base not listed here? We hold 100+ qualities across viscose, cotton, polyester, nylon, nylon-cotton and polyester-cotton. Message us on WhatsApp or email info@clothwala.com — mill direct from Surat, Gujarat, India. Minimum 100 metres for off-catalogue bases.

Read more less